# BL5340-DVK board configuration # Copyright (c) 2019-2021 Nordic Semiconductor ASA # Copyright (c) 2021-2023 Laird Connectivity # SPDX-License-Identifier: Apache-2.0 if BOARD_BL5340_DVK_NRF5340_CPUAPP || BOARD_BL5340_DVK_NRF5340_CPUAPP_NS config BOARD_ENABLE_DCDC_APP bool "Application MCU DCDC converter" select SOC_DCDC_NRF53X_APP default y config BOARD_ENABLE_DCDC_NET bool "Network MCU DCDC converter" select SOC_DCDC_NRF53X_NET default y config BOARD_ENABLE_DCDC_HV bool "High Voltage DCDC converter" select SOC_DCDC_NRF53X_HV default y config BOARD_ENABLE_CPUNET bool "NRF53 Network MCU" select SOC_NRF_GPIO_FORWARDER_FOR_NRF5340 if \ $(dt_compat_enabled,$(DT_COMPAT_NORDIC_NRF_GPIO_FORWARDER)) help This option enables releasing the Network 'force off' signal, which as a consequence will power up the Network MCU during system boot. Additionally, the option allocates GPIO pins that will be used by UARTE of the Network MCU. Note: GPIO pin allocation can only be configured by the secure Application MCU firmware, so when this option is used with the non-secure version of the board, the application needs to take into consideration, that the secure firmware image must already have configured GPIO allocation for the Network MCU. default y if (BT || NRF_802154_SER_HOST) config DOMAIN_CPUNET_BOARD string default "bl5340_dvk/nrf5340/cpunet" depends on BOARD_ENABLE_CPUNET help The board which will be used for CPUNET domain when creating a multi image application where one or more images should be located on another board. For example hci_ipc on the bl5340_dvk_cpunet for Bluetooth applications. endif # BOARD_BL5340_DVK_NRF5340_CPUAPP || BOARD_BL5340_DVK_NRF5340_CPUAPP_NS if BOARD_BL5340_DVK_NRF5340_CPUNET config DOMAIN_CPUAPP_BOARD string default "bl5340_dvk/nrf5340/cpuapp" help The board which will be used for CPUAPP domain when creating a multi image application where one or more images should be located on another board. endif # BOARD_BL5340_DVK_NRF5340_CPUNET