/* * Copyright (c) 2018 Intel Corporation * * SPDX-License-Identifier: Apache-2.0 */ #include #include #include #include #include #include "altera_avalon_i2c.h" #define LOG_LEVEL CONFIG_I2C_LOG_LEVEL #include LOG_MODULE_REGISTER(i2c_nios2); #define NIOS2_I2C_TIMEOUT_USEC 1000 #define DEV_CFG(dev) \ ((struct i2c_nios2_config *)(dev)->config->config_info) struct i2c_nios2_config { ALT_AVALON_I2C_DEV_t i2c_dev; IRQ_DATA_t irq_data; struct k_sem sem_lock; }; static int i2c_nios2_configure(struct device *dev, u32_t dev_config) { struct i2c_nios2_config *config = DEV_CFG(dev); s32_t rc = 0; k_sem_take(&config->sem_lock, K_FOREVER); if (!(I2C_MODE_MASTER & dev_config)) { LOG_ERR("i2c config mode error\n"); rc = -EINVAL; goto i2c_cfg_err; } if (I2C_ADDR_10_BITS & dev_config) { LOG_ERR("i2c config addresing error\n"); rc = -EINVAL; goto i2c_cfg_err; } if (I2C_SPEED_GET(dev_config) != I2C_SPEED_STANDARD) { LOG_ERR("i2c config speed error\n"); rc = -EINVAL; goto i2c_cfg_err; } alt_avalon_i2c_init(&config->i2c_dev); i2c_cfg_err: k_sem_give(&config->sem_lock); return rc; } static int i2c_nios2_transfer(struct device *dev, struct i2c_msg *msgs, u8_t num_msgs, u16_t addr) { struct i2c_nios2_config *config = DEV_CFG(dev); ALT_AVALON_I2C_STATUS_CODE status; u32_t restart, stop; s32_t i, timeout, rc = 0; k_sem_take(&config->sem_lock, K_FOREVER); /* register the optional interrupt callback */ alt_avalon_i2c_register_optional_irq_handler( &config->i2c_dev, &config->irq_data); /* Iterate over all the messages */ for (i = 0; i < num_msgs; i++) { /* convert restart flag */ if (msgs->flags & I2C_MSG_RESTART) { restart = ALT_AVALON_I2C_RESTART; } else { restart = ALT_AVALON_I2C_NO_RESTART; } /* convert stop flag */ if (msgs->flags & I2C_MSG_STOP) { stop = ALT_AVALON_I2C_STOP; } else { stop = ALT_AVALON_I2C_NO_STOP; } /* Set the slave device address */ alt_avalon_i2c_master_target_set(&config->i2c_dev, addr); /* Start the transfer */ if (msgs->flags & I2C_MSG_READ) { status = alt_avalon_i2c_master_receive_using_interrupts( &config->i2c_dev, msgs->buf, msgs->len, restart, stop); } else { status = alt_avalon_i2c_master_transmit_using_interrupts (&config->i2c_dev, msgs->buf, msgs->len, restart, stop); } /* Return an error if the transfer didn't * start successfully e.g., if the bus was busy */ if (status != ALT_AVALON_I2C_SUCCESS) { LOG_ERR("i2c transfer error %lu\n", status); rc = -EIO; goto i2c_transfer_err; } timeout = NIOS2_I2C_TIMEOUT_USEC; while (timeout) { k_busy_wait(1); status = alt_avalon_i2c_interrupt_transaction_status( &config->i2c_dev); if (status == ALT_AVALON_I2C_SUCCESS) { break; } timeout--; } if (timeout <= 0) { LOG_ERR("i2c busy or timeout error %lu\n", status); rc = -EIO; goto i2c_transfer_err; } /* move to the next message */ msgs++; } i2c_transfer_err: alt_avalon_i2c_disable(&config->i2c_dev); k_sem_give(&config->sem_lock); return rc; } static void i2c_nios2_isr(void *arg) { struct device *dev = (struct device *)arg; struct i2c_nios2_config *config = DEV_CFG(dev); /* Call Altera HAL driver ISR */ alt_handle_irq(&config->i2c_dev, I2C_0_IRQ); } static int i2c_nios2_init(struct device *dev); static struct i2c_driver_api i2c_nios2_driver_api = { .configure = i2c_nios2_configure, .transfer = i2c_nios2_transfer, }; static struct i2c_nios2_config i2c_nios2_cfg = { .i2c_dev = { .i2c_base = (alt_u32 *)DT_I2C_0_BASE_ADDRESS, .irq_controller_ID = I2C_0_IRQ_INTERRUPT_CONTROLLER_ID, .irq_ID = I2C_0_IRQ, .ip_freq_in_hz = DT_I2C_0_BITRATE, }, }; DEVICE_AND_API_INIT(i2c_nios2_0, DT_I2C_0_NAME, &i2c_nios2_init, NULL, &i2c_nios2_cfg, POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &i2c_nios2_driver_api); static int i2c_nios2_init(struct device *dev) { struct i2c_nios2_config *config = DEV_CFG(dev); int rc; /* initialize semaphore */ k_sem_init(&config->sem_lock, 1, 1); rc = i2c_nios2_configure(dev, I2C_MODE_MASTER | I2C_SPEED_SET(I2C_SPEED_STANDARD)); if (rc) { LOG_ERR("i2c configure failed %d\n", rc); return rc; } /* clear ISR register content */ alt_avalon_i2c_int_clear(&config->i2c_dev, ALT_AVALON_I2C_ISR_ALL_CLEARABLE_INTS_MSK); IRQ_CONNECT(I2C_0_IRQ, CONFIG_I2C_0_IRQ_PRI, i2c_nios2_isr, DEVICE_GET(i2c_nios2_0), 0); irq_enable(I2C_0_IRQ); return 0; }