/* * Copyright (c) 2019 Peter Bigot Consulting, LLC * Copyright (c) 2016 Intel Corporation * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT microchip_mcp9808 #include #include #include #include #include #include #include #include "mcp9808.h" LOG_MODULE_REGISTER(MCP9808, CONFIG_SENSOR_LOG_LEVEL); int mcp9808_reg_read(struct device *dev, uint8_t reg, uint16_t *val) { const struct mcp9808_data *data = dev->data; const struct mcp9808_config *cfg = dev->config; int rc = i2c_write_read(data->i2c_master, cfg->i2c_addr, ®, sizeof(reg), val, sizeof(*val)); if (rc == 0) { *val = sys_be16_to_cpu(*val); } return rc; } static int mcp9808_sample_fetch(struct device *dev, enum sensor_channel chan) { struct mcp9808_data *data = dev->data; __ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL || chan == SENSOR_CHAN_AMBIENT_TEMP); return mcp9808_reg_read(dev, MCP9808_REG_TEMP_AMB, &data->reg_val); } static int mcp9808_channel_get(struct device *dev, enum sensor_channel chan, struct sensor_value *val) { const struct mcp9808_data *data = dev->data; int temp = mcp9808_temp_signed_from_reg(data->reg_val); __ASSERT_NO_MSG(chan == SENSOR_CHAN_AMBIENT_TEMP); val->val1 = temp / MCP9808_TEMP_SCALE_CEL; temp -= val->val1 * MCP9808_TEMP_SCALE_CEL; val->val2 = (temp * 1000000) / MCP9808_TEMP_SCALE_CEL; return 0; } static const struct sensor_driver_api mcp9808_api_funcs = { .sample_fetch = mcp9808_sample_fetch, .channel_get = mcp9808_channel_get, #ifdef CONFIG_MCP9808_TRIGGER .attr_set = mcp9808_attr_set, .trigger_set = mcp9808_trigger_set, #endif /* CONFIG_MCP9808_TRIGGER */ }; int mcp9808_init(struct device *dev) { struct mcp9808_data *data = dev->data; const struct mcp9808_config *cfg = dev->config; int rc = 0; data->i2c_master = device_get_binding(cfg->i2c_bus); if (!data->i2c_master) { LOG_DBG("mcp9808: i2c master not found: %s", cfg->i2c_bus); return -EINVAL; } #ifdef CONFIG_MCP9808_TRIGGER rc = mcp9808_setup_interrupt(dev); #endif /* CONFIG_MCP9808_TRIGGER */ return rc; } static struct mcp9808_data mcp9808_data; static const struct mcp9808_config mcp9808_cfg = { .i2c_bus = DT_INST_BUS_LABEL(0), .i2c_addr = DT_INST_REG_ADDR(0), #ifdef CONFIG_MCP9808_TRIGGER .alert_pin = DT_INST_GPIO_PIN(0, int_gpios), .alert_flags = DT_INST_GPIO_FLAGS(0, int_gpios), .alert_controller = DT_INST_GPIO_LABEL(0, int_gpios), #endif /* CONFIG_MCP9808_TRIGGER */ }; DEVICE_AND_API_INIT(mcp9808, DT_INST_LABEL(0), mcp9808_init, &mcp9808_data, &mcp9808_cfg, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY, &mcp9808_api_funcs);