/* Driver for Infineon DPS310 temperature and pressure sensor */ /* * Copyright (c) 2019 Infineon Technologies AG * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT infineon_dps310 #include #include #include #include #include #include #include LOG_MODULE_REGISTER(DPS310, CONFIG_SENSOR_LOG_LEVEL); /* Register addresses as in the datasheet */ #define IFX_DPS310_REG_ADDR_PSR_B2 (0x00) #define IFX_DPS310_REG_ADDR_TMP_B2 (0x03) #define IFX_DPS310_REG_ADDR_PRS_CFG (0x06) #define IFX_DPS310_REG_ADDR_TMP_CFG (0x07) #define IFX_DPS310_REG_ADDR_MEAS_CFG (0x08) #define IFX_DPS310_REG_ADDR_CFG_REG (0x09) #define IFX_DPS310_REG_ADDR_INT_STS (0x0A) #define IFX_DPS310_REG_ADDR_FIFO_STS (0x0B) #define IFX_DPS310_REG_ADDR_RESET (0x0C) #define IFX_DPS310_REG_ADDR_PRODUCT_ID (0x0D) #define IFX_DPS310_REG_ADDR_COEF_0 (0x10) #define IFX_DPS310_REG_ADDR_COEF_SRCE (0x28) enum { IFX_DPS310_MODE_IDLE = 0x00, IFX_DPS310_MODE_COMMAND_PRESSURE = 0x01, IFX_DPS310_MODE_COMMAND_TEMPERATURE = 0x02, IFX_DPS310_MODE_BACKGROUND_PRESSURE = 0x05, IFX_DPS310_MODE_BACKGROUND_TEMPERATURE = 0x06, IFX_DPS310_MODE_BACKGROUND_ALL = 0x07 }; /* Bits in registers as in the datasheet */ #define IFX_DPS310_REG_ADDR_MEAS_CFG_PRS_RDY (0x10) #define IFX_DPS310_REG_ADDR_MEAS_CFG_TMP_RDY (0x20) /* * If sensor is ready after self initialization * bits 6 and 7 in register MEAS_CFG (0x08) should be "1" */ #define IFX_DPS310_REG_ADDR_MEAS_CFG_SELF_INIT_OK (0xC0) #define IFX_DPS310_COEF_SRCE_MASK (0x80) #define IFX_DPS310_PRODUCT_ID (0x10) /* Polling time in ms*/ #define POLL_TIME_MS (K_MSEC(10)) /* Number of times to poll before timeout */ #define POLL_TRIES 3 /* * Measurement times in ms for different oversampling rates * From Table 16 in the datasheet, rounded up for safety margin */ enum { IFX_DPS310_MEAS_TIME_OSR_1 = 4, IFX_DPS310_MEAS_TIME_OSR_2 = 6, IFX_DPS310_MEAS_TIME_OSR_4 = 9, IFX_DPS310_MEAS_TIME_OSR_8 = 15, IFX_DPS310_MEAS_TIME_OSR_16 = 28, IFX_DPS310_MEAS_TIME_OSR_32 = 54, IFX_DPS310_MEAS_TIME_OSR_64 = 105, IFX_DPS310_MEAS_TIME_OSR_128 = 207 }; /* Compensation scale factors from Table 9 in the datasheet */ enum { IFX_DPS310_SF_OSR_1 = 524288, IFX_DPS310_SF_OSR_2 = 1572864, IFX_DPS310_SF_OSR_4 = 3670016, IFX_DPS310_SF_OSR_8 = 7864320, IFX_DPS310_SF_OSR_16 = 253952, IFX_DPS310_SF_OSR_32 = 516096, IFX_DPS310_SF_OSR_64 = 1040384, IFX_DPS310_SF_OSR_128 = 2088960 }; /* * Oversampling and measurement rates configuration for pressure and temperature * sensor According to Table 16 of the datasheet */ enum { IFX_DPS310_RATE_1 = 0x00, IFX_DPS310_RATE_2 = 0x01, IFX_DPS310_RATE_4 = 0x02, IFX_DPS310_RATE_8 = 0x03, IFX_DPS310_RATE_16 = 0x04, IFX_DPS310_RATE_32 = 0x05, IFX_DPS310_RATE_64 = 0x06, IFX_DPS310_RATE_128 = 0x07 }; /* Helper macro to set temperature and pressure config register */ #define CFG_REG(MEAS_RATE, OSR_RATE) \ ((((MEAS_RATE)&0x07) << 4) | ((OSR_RATE)&0x07)) /* Setup constants depending on temperature oversampling factor */ #if defined CONFIG_DPS310_TEMP_OSR_1X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_1 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_1 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_1) #define IFX_DPS310_T_SHIFT 0 #elif defined CONFIG_DPS310_TEMP_OSR_2X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_2 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_2 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_2) #define IFX_DPS310_T_SHIFT 0 #elif defined CONFIG_DPS310_TEMP_OSR_4X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_4 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_4 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_4) #define IFX_DPS310_T_SHIFT 0 #elif defined CONFIG_DPS310_TEMP_OSR_8X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_8 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_8 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_8) #define IFX_DPS310_T_SHIFT 0 #elif defined CONFIG_DPS310_TEMP_OSR_16X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_16 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_16 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_16) #define IFX_DPS310_T_SHIFT 1 #elif defined CONFIG_DPS310_TEMP_OSR_32X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_32 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_32 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_32) #define IFX_DPS310_T_SHIFT 1 #elif defined CONFIG_DPS310_TEMP_OSR_64X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_64 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_64 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_64) #define IFX_DPS310_T_SHIFT 1 #elif defined CONFIG_DPS310_TEMP_OSR_128X #define IFX_DPS310_SF_TMP IFX_DPS310_SF_OSR_128 #define IFX_DPS310_TMP_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_128 #define IFX_DPS310_TMP_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_128) #define IFX_DPS310_T_SHIFT 1 #endif /* Setup constants depending on pressure oversampling factor */ #if defined CONFIG_DPS310_PRESS_OSR_1X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_1 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_1 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_1) #define IFX_DPS310_P_SHIFT 0 #elif defined CONFIG_DPS310_PRESS_OSR_2X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_2 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_2 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_2) #define IFX_DPS310_P_SHIFT 0 #elif defined CONFIG_DPS310_PRESS_OSR_4X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_4 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_4 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_4) #define IFX_DPS310_P_SHIFT 0 #elif defined CONFIG_DPS310_PRESS_OSR_8X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_8 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_8 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_8) #define IFX_DPS310_P_SHIFT 0 #elif defined CONFIG_DPS310_PRESS_OSR_16X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_16 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_16 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_16) #define IFX_DPS310_P_SHIFT 1 #elif defined CONFIG_DPS310_PRESS_OSR_32X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_32 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_32 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_32) #define IFX_DPS310_P_SHIFT 1 #elif defined CONFIG_DPS310_PRESS_OSR_64X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_64 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_64 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_64) #define IFX_DPS310_P_SHIFT 1 #elif defined CONFIG_DPS310_PRESS_OSR_128X #define IFX_DPS310_SF_PSR IFX_DPS310_SF_OSR_128 #define IFX_DPS310_PSR_MEAS_TIME IFX_DPS310_MEAS_TIME_OSR_128 #define IFX_DPS310_PSR_CFG CFG_REG(IFX_DPS310_RATE_1, IFX_DPS310_RATE_128) #define IFX_DPS310_P_SHIFT 1 #endif #define DPS310_CFG_REG \ (((IFX_DPS310_T_SHIFT & 0x01) << 3) | \ ((IFX_DPS310_P_SHIFT & 0x01) << 2)) #define HW_BUG_FIX_SEQUENCE_LEN 5 #define POW_2_23_MINUS_1 BIT_MASK(23) #define POW_2_24 BIT(24) #define POW_2_15_MINUS_1 BIT_MASK(15) #define POW_2_16 BIT(16) #define POW_2_11_MINUS_1 BIT_MASK(11) #define POW_2_12 BIT(12) #define POW_2_20 BIT(20) #define POW_2_19_MINUS_1 BIT_MASK(19) /* Needed because the values are referenced by pointer. */ static const uint8_t REG_ADDR_MEAS_CFG = IFX_DPS310_REG_ADDR_MEAS_CFG; static const uint8_t REG_ADDR_CALIB_COEFF_0 = IFX_DPS310_REG_ADDR_COEF_0; static const uint8_t REG_ADDR_TMP_B2 = IFX_DPS310_REG_ADDR_TMP_B2; static const uint8_t REG_ADDR_PSR_B2 = IFX_DPS310_REG_ADDR_PSR_B2; static const uint8_t REG_ADDR_COEF_SRCE = IFX_DPS310_REG_ADDR_COEF_SRCE; /* calibration coefficients */ struct dps310_cal_coeff { /* Pressure Sensor Calibration Coefficients */ int32_t c00; /* 20bit */ int32_t c10; /* 20bit */ int16_t c01; /* 16bit */ int16_t c11; /* 16bit */ int16_t c20; /* 16bit */ int16_t c21; /* 16bit */ int16_t c30; /* 16bit */ /* Temperature Sensor Calibration Coefficients */ int16_t c0; /* 12bit */ int16_t c1; /* 12bit */ }; struct dps310_data { struct dps310_cal_coeff comp; /* Temperature Values */ int32_t tmp_val1; int32_t tmp_val2; /* Last raw temperature value for temperature compensation */ int32_t raw_tmp; /* Pressure Values */ int32_t psr_val1; int32_t psr_val2; }; struct dps310_cfg { struct i2c_dt_spec i2c; }; /* * Convert the bytes from calibration memory to calibration coefficients * structure */ static void dps310_calib_coeff_creation(const uint8_t raw_coef[18], struct dps310_cal_coeff *comp) { /* Temperature sensor compensation values */ comp->c0 = (((uint16_t)raw_coef[0]) << 4) + (raw_coef[1] >> 4); /* coefficient is 2nd compliment */ if (comp->c0 > POW_2_11_MINUS_1) { comp->c0 = comp->c0 - POW_2_12; } comp->c1 = (((uint16_t)(raw_coef[1] & 0x0F)) << 8) + raw_coef[2]; /* coefficient is 2nd compliment */ if (comp->c1 > POW_2_11_MINUS_1) { comp->c1 = comp->c1 - POW_2_12; } /* Pressure sensor compensation values */ comp->c00 = (((uint32_t)raw_coef[3]) << 12) + (((uint16_t)raw_coef[4]) << 4) + (raw_coef[5] >> 4); /* coefficient is 2nd compliment */ if (comp->c00 > POW_2_19_MINUS_1) { comp->c00 = comp->c00 - POW_2_20; } comp->c10 = (((uint32_t)(raw_coef[5] & 0x0F)) << 16) + (((uint16_t)raw_coef[6]) << 8) + raw_coef[7]; /* coefficient is 2nd compliment */ if (comp->c10 > POW_2_19_MINUS_1) { comp->c10 = comp->c10 - POW_2_20; } comp->c01 = (int16_t) sys_get_be16(&raw_coef[8]); comp->c11 = (int16_t) sys_get_be16(&raw_coef[10]); comp->c20 = (int16_t) sys_get_be16(&raw_coef[12]); comp->c21 = (int16_t) sys_get_be16(&raw_coef[14]); comp->c30 = (int16_t) sys_get_be16(&raw_coef[16]); } /* Poll one or multiple bits given by ready_mask in reg_addr */ static bool poll_rdy(const struct device *dev, uint8_t reg_addr, uint8_t ready_mask) { const struct dps310_cfg *config = dev->config; /* Try only a finite number of times */ for (int i = 0; i < POLL_TRIES; i++) { uint8_t reg = 0; int res = i2c_reg_read_byte_dt(&config->i2c, reg_addr, ®); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } if ((reg & ready_mask) == ready_mask) { /* measurement is ready */ return true; } /* give the sensor more time */ k_sleep(POLL_TIME_MS); } return false; } /* Trigger a temperature measurement and wait until the result is stored */ static bool dps310_trigger_temperature(const struct device *dev) { const struct dps310_cfg *config = dev->config; /* command to start temperature measurement */ static const uint8_t tmp_meas_cmd[] = { IFX_DPS310_REG_ADDR_MEAS_CFG, IFX_DPS310_MODE_COMMAND_TEMPERATURE }; /* trigger temperature measurement */ int res = i2c_write_dt(&config->i2c, tmp_meas_cmd, sizeof(tmp_meas_cmd)); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } /* give the sensor time to store measured values internally */ k_msleep(IFX_DPS310_TMP_MEAS_TIME); if (!poll_rdy(dev, IFX_DPS310_REG_ADDR_MEAS_CFG, IFX_DPS310_REG_ADDR_MEAS_CFG_TMP_RDY)) { LOG_DBG("Poll timeout for temperature"); return false; } return true; } /* Trigger a pressure measurement and wait until the result is stored */ static bool dps310_trigger_pressure(const struct device *dev) { const struct dps310_cfg *config = dev->config; /* command to start pressure measurement */ static const uint8_t psr_meas_cmd[] = { IFX_DPS310_REG_ADDR_MEAS_CFG, IFX_DPS310_MODE_COMMAND_PRESSURE }; /* trigger pressure measurement */ int res = i2c_write_dt(&config->i2c, psr_meas_cmd, sizeof(psr_meas_cmd)); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } /* give the sensor time to store measured values internally */ k_msleep(IFX_DPS310_PSR_MEAS_TIME); if (!poll_rdy(dev, IFX_DPS310_REG_ADDR_MEAS_CFG, IFX_DPS310_REG_ADDR_MEAS_CFG_PRS_RDY)) { LOG_DBG("Poll timeout for pressure"); return false; } return true; } /* * function to fix a hardware problem on some devices * you have this bug if you measure around 60°C when temperature is around 20°C * call dps310_hw_bug_fix() directly in the init() function to fix this issue */ static void dps310_hw_bug_fix(const struct device *dev) { const struct dps310_cfg *config = dev->config; /* setup the necessary 5 sequences to fix the hw bug */ static const uint8_t hw_bug_fix_sequence[HW_BUG_FIX_SEQUENCE_LEN][2] = { /* * First write valid signature on 0x0e and 0x0f * to unlock address 0x62 */ { 0x0E, 0xA5 }, { 0x0F, 0x96 }, /* Then update high gain value for Temperature */ { 0x62, 0x02 }, /* Finally lock back the location 0x62 */ { 0x0E, 0x00 }, { 0x0F, 0x00 } }; /* execute sequence for hw bug fix */ for (int i = 0; i < HW_BUG_FIX_SEQUENCE_LEN; i++) { int res = i2c_write_dt(&config->i2c, hw_bug_fix_sequence[i], 2); if (res < 0) { LOG_WRN("I2C error: %d", res); return; } } } /* * Scale and compensate the raw temperature measurement value to micro °C * The formula is based on the Chapter 4.9.2 in the datasheet and was * modified to need only integer arithmetic. */ static void dps310_scale_temperature(const struct device *dev, int32_t tmp_raw) { struct dps310_data *data = dev->data; const struct dps310_cal_coeff *comp = &data->comp; /* first term, rescaled to micro °C */ int32_t tmp_p0 = (1000000 / 2) * comp->c0; /* second term, rescaled to micro °C */ int32_t tmp_p1 = (((int64_t)1000000) * comp->c1 * tmp_raw) / IFX_DPS310_SF_TMP; /* calculate the temperature corresponding to the datasheet */ int32_t tmp_final = tmp_p0 + tmp_p1; /* value is in micro °C */ /* store calculated value */ data->tmp_val1 = tmp_final / 1000000; data->tmp_val2 = tmp_final % 1000000; } /* * Scale and temperature compensate the raw pressure measurement value to * Kilopascal. The formula is based on the Chapter 4.9.1 in the datasheet. */ static void dps310_scale_pressure(const struct device *dev, int32_t tmp_raw, int32_t psr_raw) { struct dps310_data *data = dev->data; const struct dps310_cal_coeff *comp = &data->comp; float psr = ((float)psr_raw) / IFX_DPS310_SF_PSR; float tmp = ((float)tmp_raw) / IFX_DPS310_SF_TMP; /* scale according to formula from datasheet */ float psr_final = comp->c00; psr_final += psr * (comp->c10 + psr * (comp->c20 + psr * comp->c30)); psr_final += tmp * comp->c01; psr_final += tmp * psr * (comp->c11 + psr * comp->c21); /* rescale from Pascal to Kilopascal */ psr_final /= 1000; /* store calculated value */ data->psr_val1 = psr_final; data->psr_val2 = (psr_final - data->psr_val1) * 1000000; } /* Convert the raw sensor data to int32_t */ static int32_t raw_to_int24(const uint8_t raw[3]) { /* convert from twos complement */ int32_t res = (int32_t) sys_get_be24(raw); if (res > POW_2_23_MINUS_1) { res -= POW_2_24; } return res; } /* perform a single measurement of temperature and pressure */ static bool dps310_measure_tmp_psr(const struct device *dev) { struct dps310_data *data = dev->data; const struct dps310_cfg *config = dev->config; if (!dps310_trigger_temperature(dev)) { return false; } if (!dps310_trigger_pressure(dev)) { return false; } /* memory for pressure and temperature raw values */ uint8_t value_raw[6]; /* read pressure and temperature raw values in one continuous read */ int res = i2c_write_read_dt(&config->i2c, ®_ADDR_PSR_B2, 1, &value_raw, sizeof(value_raw)); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } /* convert raw data to int */ int32_t psr_raw = raw_to_int24(&value_raw[0]); data->raw_tmp = raw_to_int24(&value_raw[3]); dps310_scale_temperature(dev, data->raw_tmp); dps310_scale_pressure(dev, data->raw_tmp, psr_raw); return true; } /* * perform a single pressure measurement * uses the stored temperature value for sensor temperature compensation * temperature must be measured regularly for good temperature compensation */ static bool dps310_measure_psr(const struct device *dev) { struct dps310_data *data = dev->data; const struct dps310_cfg *config = dev->config; /* measure pressure */ if (!dps310_trigger_pressure(dev)) { return false; } /* memory for pressure raw value */ uint8_t value_raw[3]; /* read pressure raw values in one continuous read */ int res = i2c_write_read_dt(&config->i2c, ®_ADDR_PSR_B2, 1, &value_raw, sizeof(value_raw)); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } /* convert raw data to int */ int32_t psr_raw = raw_to_int24(&value_raw[0]); dps310_scale_pressure(dev, data->raw_tmp, psr_raw); return true; } /* perform a single temperature measurement */ static bool dps310_measure_tmp(const struct device *dev) { struct dps310_data *data = dev->data; const struct dps310_cfg *config = dev->config; /* measure temperature */ if (!dps310_trigger_temperature(dev)) { return false; } /* memory for temperature raw value */ uint8_t value_raw[3]; /* read temperature raw values in one continuous read */ int res = i2c_write_read_dt(&config->i2c, ®_ADDR_TMP_B2, 1, &value_raw, sizeof(value_raw)); if (res < 0) { LOG_WRN("I2C error: %d", res); return false; } /* convert raw data to int */ data->raw_tmp = raw_to_int24(&value_raw[0]); dps310_scale_temperature(dev, data->raw_tmp); return true; } /* Initialize the sensor and apply the configuration */ static int dps310_init(const struct device *dev) { struct dps310_data *data = dev->data; const struct dps310_cfg *config = dev->config; if (!device_is_ready(config->i2c.bus)) { LOG_ERR("I2C bus device not ready"); return -ENODEV; } uint8_t product_id = 0; int res = i2c_reg_read_byte_dt(&config->i2c, IFX_DPS310_REG_ADDR_PRODUCT_ID, &product_id); if (res < 0) { LOG_ERR("No device found"); return -EINVAL; } if (product_id != IFX_DPS310_PRODUCT_ID) { LOG_ERR("Device is not a DPS310"); return -EINVAL; } LOG_DBG("Init DPS310"); /* give the sensor time to load the calibration data */ k_sleep(K_MSEC(40)); /* wait for the sensor to load the calibration data */ if (!poll_rdy(dev, REG_ADDR_MEAS_CFG, IFX_DPS310_REG_ADDR_MEAS_CFG_SELF_INIT_OK)) { LOG_DBG("Sensor not ready"); return -EIO; } /* read calibration coefficients */ uint8_t raw_coef[18] = { 0 }; res = i2c_write_read_dt(&config->i2c, ®_ADDR_CALIB_COEFF_0, 1, &raw_coef, 18); if (res < 0) { LOG_WRN("I2C error: %d", res); return -EIO; } /* convert calibration coefficients */ dps310_calib_coeff_creation(raw_coef, &data->comp); /* * check which temperature sensor was used for calibration and use it * for measurements. */ uint8_t tmp_coef_srce = 0; res = i2c_write_read_dt(&config->i2c, ®_ADDR_COEF_SRCE, 1, &tmp_coef_srce, sizeof(tmp_coef_srce)); if (res < 0) { LOG_WRN("I2C error: %d", res); return -EIO; } /* clear all other bits */ tmp_coef_srce &= IFX_DPS310_COEF_SRCE_MASK; /* merge with temperature measurement configuration */ tmp_coef_srce |= IFX_DPS310_TMP_CFG; /* set complete configuration in one write */ const uint8_t config_seq[] = { IFX_DPS310_REG_ADDR_PRS_CFG, /* start register address */ IFX_DPS310_PSR_CFG, /* PSR_CFG */ tmp_coef_srce, /* TMP_CFG */ 0x00, /* MEAS_CFG */ DPS310_CFG_REG /* CFG_REG */ }; res = i2c_write_dt(&config->i2c, config_seq, sizeof(config_seq)); if (res < 0) { LOG_WRN("I2C error: %d", res); return -EIO; } dps310_hw_bug_fix(dev); dps310_measure_tmp_psr(dev); LOG_DBG("Init OK"); return 0; } /* Do a measurement and fetch the data from the sensor */ static int dps310_sample_fetch(const struct device *dev, enum sensor_channel chan) { LOG_DBG("Fetching sample from DPS310"); switch (chan) { case SENSOR_CHAN_AMBIENT_TEMP: if (!dps310_measure_tmp(dev)) { LOG_ERR("Failed to measure temperature"); return -EIO; } break; case SENSOR_CHAN_PRESS: if (!dps310_measure_psr(dev)) { LOG_ERR("Failed to measure pressure"); return -EIO; } break; case SENSOR_CHAN_ALL: if (!dps310_measure_tmp_psr(dev)) { LOG_ERR("Failed to measure temperature and pressure"); return -EIO; } break; default: return -EINVAL; } return 0; } /* Get the measurement data */ static int dps310_channel_get(const struct device *dev, enum sensor_channel chan, struct sensor_value *val) { struct dps310_data *data = dev->data; switch (chan) { case SENSOR_CHAN_AMBIENT_TEMP: val->val1 = data->tmp_val1; val->val2 = data->tmp_val2; break; case SENSOR_CHAN_PRESS: val->val1 = data->psr_val1; val->val2 = data->psr_val2; break; default: return -EINVAL; } return 0; } static const struct sensor_driver_api dps310_api_funcs = { .sample_fetch = dps310_sample_fetch, .channel_get = dps310_channel_get, }; #define DPS310_DEFINE(inst) \ static struct dps310_data dps310_data_##inst; \ \ static const struct dps310_cfg dps310_cfg_##inst = { \ .i2c = I2C_DT_SPEC_INST_GET(inst), \ }; \ \ SENSOR_DEVICE_DT_INST_DEFINE(inst, dps310_init, NULL, \ &dps310_data_##inst, &dps310_cfg_##inst, POST_KERNEL, \ CONFIG_SENSOR_INIT_PRIORITY, &dps310_api_funcs); \ DT_INST_FOREACH_STATUS_OKAY(DPS310_DEFINE)