/* * Copyright (c) 2020 Amarula Solutions. * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT st_stm32_sdmmc #include #include #include #include #include #include #include #include #include LOG_MODULE_REGISTER(stm32_sdmmc); struct stm32_sdmmc_priv { SD_HandleTypeDef hsd; int status; struct k_work work; struct gpio_callback cd_cb; struct { const char *name; const struct device *port; int pin; int flags; } cd; struct { const char *name; const struct device *port; int pin; int flags; } pe; struct stm32_pclken pclken; struct { const struct soc_gpio_pinctrl *list; size_t len; } pinctrl; }; static int stm32_sdmmc_clock_enable(struct stm32_sdmmc_priv *priv) { const struct device *clock; #if CONFIG_SOC_SERIES_STM32L4X LL_RCC_PLLSAI1_Disable(); /* Configure PLLSA11 to enable 48M domain */ LL_RCC_PLLSAI1_ConfigDomain_48M(LL_RCC_PLLSOURCE_HSI, LL_RCC_PLLM_DIV_1, 8, LL_RCC_PLLSAI1Q_DIV_8); /* Enable PLLSA1 */ LL_RCC_PLLSAI1_Enable(); /* Enable PLLSAI1 output mapped on 48MHz domain clock */ LL_RCC_PLLSAI1_EnableDomain_48M(); /* Wait for PLLSA1 ready flag */ while (LL_RCC_PLLSAI1_IsReady() != 1) ; LL_RCC_SetSDMMCClockSource(LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1); #endif clock = device_get_binding(STM32_CLOCK_CONTROL_NAME); if (!clock) { return -ENODEV; } /* Enable the APB clock for stm32_sdmmc */ return clock_control_on(clock, (clock_control_subsys_t *)&priv->pclken); } static int stm32_sdmmc_clock_disable(struct stm32_sdmmc_priv *priv) { const struct device *clock; clock = device_get_binding(STM32_CLOCK_CONTROL_NAME); if (!clock) { return -ENODEV; } return clock_control_off(clock, (clock_control_subsys_t *)&priv->pclken); } static int stm32_sdmmc_access_init(struct disk_info *disk) { const struct device *dev = disk->dev; struct stm32_sdmmc_priv *priv = dev->data; int err; if (priv->status == DISK_STATUS_OK) { return 0; } if (priv->status == DISK_STATUS_NOMEDIA) { return -ENODEV; } err = stm32_sdmmc_clock_enable(priv); if (err) { LOG_ERR("failed to init clocks"); return err; } err = HAL_SD_Init(&priv->hsd); if (err != HAL_OK) { LOG_ERR("failed to init stm32_sdmmc"); return -EIO; } priv->status = DISK_STATUS_OK; return 0; } static void stm32_sdmmc_access_deinit(struct stm32_sdmmc_priv *priv) { HAL_SD_DeInit(&priv->hsd); stm32_sdmmc_clock_disable(priv); } static int stm32_sdmmc_access_status(struct disk_info *disk) { const struct device *dev = disk->dev; struct stm32_sdmmc_priv *priv = dev->data; return priv->status; } static int stm32_sdmmc_access_read(struct disk_info *disk, uint8_t *data_buf, uint32_t start_sector, uint32_t num_sector) { const struct device *dev = disk->dev; struct stm32_sdmmc_priv *priv = dev->data; int err; err = HAL_SD_ReadBlocks(&priv->hsd, data_buf, start_sector, num_sector, 30000); if (err != HAL_OK) { LOG_ERR("sd read block failed %d", err); return -EIO; } while (HAL_SD_GetCardState(&priv->hsd) != HAL_SD_CARD_TRANSFER) ; return 0; } static int stm32_sdmmc_access_write(struct disk_info *disk, const uint8_t *data_buf, uint32_t start_sector, uint32_t num_sector) { const struct device *dev = disk->dev; struct stm32_sdmmc_priv *priv = dev->data; int err; err = HAL_SD_WriteBlocks(&priv->hsd, (uint8_t *)data_buf, start_sector, num_sector, 30000); if (err != HAL_OK) { LOG_ERR("sd write block failed %d", err); return -EIO; } while (HAL_SD_GetCardState(&priv->hsd) != HAL_SD_CARD_TRANSFER) ; return 0; } static int stm32_sdmmc_access_ioctl(struct disk_info *disk, uint8_t cmd, void *buff) { const struct device *dev = disk->dev; struct stm32_sdmmc_priv *priv = dev->data; HAL_SD_CardInfoTypeDef info; int err; switch (cmd) { case DISK_IOCTL_GET_SECTOR_COUNT: err = HAL_SD_GetCardInfo(&priv->hsd, &info); if (err != HAL_OK) { return -EIO; } *(uint32_t *)buff = info.LogBlockNbr; break; case DISK_IOCTL_GET_SECTOR_SIZE: err = HAL_SD_GetCardInfo(&priv->hsd, &info); if (err != HAL_OK) { return -EIO; } *(uint32_t *)buff = info.LogBlockSize; break; case DISK_IOCTL_GET_ERASE_BLOCK_SZ: *(uint32_t *)buff = 1; break; case DISK_IOCTL_CTRL_SYNC: /* we use a blocking API, so nothing to do for sync */ break; default: return -EINVAL; } return 0; } static const struct disk_operations stm32_sdmmc_ops = { .init = stm32_sdmmc_access_init, .status = stm32_sdmmc_access_status, .read = stm32_sdmmc_access_read, .write = stm32_sdmmc_access_write, .ioctl = stm32_sdmmc_access_ioctl, }; static struct disk_info stm32_sdmmc_info = { .name = CONFIG_DISK_STM32_SDMMC_VOLUME_NAME, .ops = &stm32_sdmmc_ops, }; /* * Check if the card is present or not. If no card detect gpio is set, assume * the card is present. If reading the gpio fails for some reason, assume the * card is there. */ static bool stm32_sdmmc_card_present(struct stm32_sdmmc_priv *priv) { int err; if (!priv->cd.name) { return true; } err = gpio_pin_get(priv->cd.port, priv->cd.pin); if (err < 0) { LOG_WRN("reading card detect failed %d", err); return true; } return err; } static void stm32_sdmmc_cd_handler(struct k_work *item) { struct stm32_sdmmc_priv *priv = CONTAINER_OF(item, struct stm32_sdmmc_priv, work); if (stm32_sdmmc_card_present(priv)) { LOG_DBG("card inserted"); priv->status = DISK_STATUS_UNINIT; } else { LOG_DBG("card removed"); stm32_sdmmc_access_deinit(priv); priv->status = DISK_STATUS_NOMEDIA; } } static void stm32_sdmmc_cd_callback(const struct device *gpiodev, struct gpio_callback *cb, uint32_t pin) { struct stm32_sdmmc_priv *priv = CONTAINER_OF(cb, struct stm32_sdmmc_priv, cd_cb); k_work_submit(&priv->work); } static int stm32_sdmmc_card_detect_init(struct stm32_sdmmc_priv *priv) { int err; if (!priv->cd.name) { return 0; } priv->cd.port = device_get_binding(priv->cd.name); if (!priv->cd.port) { return -ENODEV; } gpio_init_callback(&priv->cd_cb, stm32_sdmmc_cd_callback, 1 << priv->cd.pin); err = gpio_add_callback(priv->cd.port, &priv->cd_cb); if (err) { return err; } err = gpio_pin_configure(priv->cd.port, priv->cd.pin, priv->cd.flags | GPIO_INPUT); if (err) { goto remove_callback; } err = gpio_pin_interrupt_configure(priv->cd.port, priv->cd.pin, GPIO_INT_EDGE_BOTH); if (err) { goto unconfigure_pin; } return 0; unconfigure_pin: gpio_pin_configure(priv->cd.port, priv->cd.pin, GPIO_DISCONNECTED); remove_callback: gpio_remove_callback(priv->cd.port, &priv->cd_cb); return err; } static int stm32_sdmmc_card_detect_uninit(struct stm32_sdmmc_priv *priv) { if (!priv->cd.name) { return 0; } gpio_pin_interrupt_configure(priv->cd.port, priv->cd.pin, GPIO_INT_MODE_DISABLED); gpio_pin_configure(priv->cd.port, priv->cd.pin, GPIO_DISCONNECTED); gpio_remove_callback(priv->cd.port, &priv->cd_cb); return 0; } static int stm32_sdmmc_pwr_init(struct stm32_sdmmc_priv *priv) { int err; if (!priv->pe.name) { return 0; } priv->pe.port = device_get_binding(priv->pe.name); if (!priv->pe.port) { return -ENODEV; } err = gpio_pin_configure(priv->pe.port, priv->pe.pin, priv->pe.flags | GPIO_OUTPUT_ACTIVE); if (err) { return err; } k_sleep(K_MSEC(50)); return 0; } static int stm32_sdmmc_pwr_uninit(struct stm32_sdmmc_priv *priv) { if (!priv->pe.name) { return 0; } gpio_pin_configure(priv->pe.port, priv->pe.pin, GPIO_DISCONNECTED); return 0; } static int disk_stm32_sdmmc_init(const struct device *dev) { struct stm32_sdmmc_priv *priv = dev->data; int err; k_work_init(&priv->work, stm32_sdmmc_cd_handler); /* Configure dt provided device signals when available */ err = stm32_dt_pinctrl_configure(priv->pinctrl.list, priv->pinctrl.len, (uint32_t)priv->hsd.Instance); if (err < 0) { return err; } err = stm32_sdmmc_card_detect_init(priv); if (err) { return err; } err = stm32_sdmmc_pwr_init(priv); if (err) { goto err_card_detect; } if (stm32_sdmmc_card_present(priv)) { priv->status = DISK_STATUS_UNINIT; } else { priv->status = DISK_STATUS_NOMEDIA; } stm32_sdmmc_info.dev = dev; err = disk_access_register(&stm32_sdmmc_info); if (err) { goto err_pwr; } return 0; err_pwr: stm32_sdmmc_pwr_uninit(priv); err_card_detect: stm32_sdmmc_card_detect_uninit(priv); return err; } #if DT_NODE_HAS_STATUS(DT_DRV_INST(0), okay) static const struct soc_gpio_pinctrl sdmmc_pins_1[] = ST_STM32_DT_INST_PINCTRL(0, 0); static struct stm32_sdmmc_priv stm32_sdmmc_priv_1 = { .hsd = { .Instance = (SDMMC_TypeDef *)DT_INST_REG_ADDR(0), }, #if DT_INST_NODE_HAS_PROP(0, cd_gpios) .cd = { .name = DT_INST_GPIO_LABEL(0, cd_gpios), .pin = DT_INST_GPIO_PIN(0, cd_gpios), .flags = DT_INST_GPIO_FLAGS(0, cd_gpios), }, #endif #if DT_INST_NODE_HAS_PROP(0, pwr_gpios) .pe = { .name = DT_INST_GPIO_LABEL(0, pwr_gpios), .pin = DT_INST_GPIO_PIN(0, pwr_gpios), .flags = DT_INST_GPIO_FLAGS(0, pwr_gpios), }, #endif .pclken = { .bus = DT_INST_CLOCKS_CELL(0, bus), .enr = DT_INST_CLOCKS_CELL(0, bits), }, .pinctrl = { .list = sdmmc_pins_1, .len = ARRAY_SIZE(sdmmc_pins_1) } }; DEVICE_AND_API_INIT(stm32_sdmmc_dev1, DT_INST_LABEL(0), disk_stm32_sdmmc_init, &stm32_sdmmc_priv_1, NULL, APPLICATION, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, NULL); #endif