In ISR context we receive NULL when there is no free buffers available.
Add handling similar to H4.
Change-Id: I9c1c2784ceaf31a1b2f9433b142a342e8dcdbc3e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move rx state to the h5 struct and use a commmon h5_reset_rx() helper
to reset it.
Change-Id: I92af740ae26b443460531b7200dbb0e64fb11d64
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The handling of SIGNAL and PAYLOAD states is exactly the same. Just
remove the other one.
Change-Id: Id82524812919658c6b1df76a7081c826aaf3df34
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When packet is retransmitted we need to recalculate sequence number
since it is not stored in the packet buffer.
Change-Id: Id389fa814e82cfd5e39afba1eaeaa79fc9e337f1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case of unexpected SLIP_DELIMETER we need to discard remaining
bytes in UART and start from beginning.
Change-Id: Ib13a885cc1a4a188057c587e9974aff1d90594c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Using number_removed to find out how many packets from unack queue we
need to clear.
Change-Id: Icad948892f3ab1febc939e9ba6d6b3431973633e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We might get out of sync packet because of race collision, drop it.
Change-Id: Ic84a760199df1520dc7a95383972f9ec428c7fde
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Analyze stack when sending single ACK packet.
Change-Id: Ifd3a54f0d1ad9a644363563fa9b8bea05b895fa9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If there is no packet to be sent after timeout we have to send ACK for
last received packet.
Change-Id: I30bbc4ae1a257f9a7351dc5a5d2f1269740ce447
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add initial code for three-wire (H5) Bluetooth uart driver.
At the moment the driver is EXPERIMENTAL. To test use following
method with qemu:
Run btproxy with three-wire emulation patches:
$ sudo tools/btproxy -d --pty -3
Opening pseudoterminal
New pts created: /dev/pts/21
Opening user channel for hci0
Notice that new device created: /dev/pts/21, use it with qemu -serial
parameter.
Run qemu target with following parameters:
$ make qemu 'QEMU_EXTRA_FLAGS=-serial /dev/pts/21'
Change-Id: I51579ffd8088583df9106689a03b2a0b4aa9e4cb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra line and correct style according to common style.
Change-Id: I5fc9434edce44e52b51fc40866638c0899985b1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Needed headroom depends on type of the UART driver, change it
accordingly.
Change-Id: Ic9bf5f08a49be6823fce5eff8139d5f949b313ca
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that the HCI driver is called H:4 use the shorter driver-specific
prefix h4_* for its internal symbols.
Change-Id: Icdab1147e5ec31f84e0a3d810192ddd462f4dfdd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make newline part of log macros so that caller doesn't have to
append '\n' every time logs are used. This make sure that no
log will be missing new line which results in concatenated log
messages.
Change-Id: I3231ae747c790816dbc1608e0a3bd56467ba0a1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use device name to find the UART device for Bluetooth usage,
instead of relying on an arbitrary index.
The default device names being used are derived from the original
board.h for each platform. Some of them point to the same device
as UART console. Since this is a Kconfig option, the default
can be overridden so this is not a serious issue.
Change-Id: Ibe82f3968e72ba60f9c033aa3dfcb2fb3c41dc75
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the call to uart_init(), and let the UART drivers take care of
the port initialization.
Change-Id: Ibeca65b3fe64feb7a203a793c01c525ff5e6afda
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver should handle the initialization instead of relying on
platform initialization. This is to conform to the driver model.
Change-Id: Idc95d59bce2470b5118e416ee05f07548991a15c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There's no need to do manual minumum calculation when there's the
min() helper available.
Change-Id: I4d5cfb088d9e6499750664680419ab4beb56e0d5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We can remove the need for the extra 1-byte headroom by simply
directly writing the H:4 header with uart_poll_out(). Also the
separate uart_out() function can be removed by taking advantage of the
counters already present in the net_buf.
Change-Id: I54bd852e28f416b3de250cd9f8a126269cccfc14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is more intuitive to assume that the driver send() consumes (takes
ownership) of the buffer given to it.
Change-Id: I53d9cbebc0564d1d11110fc78a62ce0bbb3cdfd2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Even if a buffer can't hold the needed amount of data we should still
cleanly discard the bytes so that the driver doesn't loose sync of the
next packet boundary. This way we also get to remove the now
unnecesary 'failed' label.
Change-Id: Ic921fbf6c0ddef4a7721cee7fa3e01a31b127778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we avoid dealing with the specific buffer type value and to
make it clear that these are for drivers onle.
Change-Id: I8aef7ec6a767b2fa68cbe374eb371e2a6192f675
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's invalid to try to send HCI events to the controller so we should
treat such buffer types as invalid in bt_uart_send().
Change-Id: I4108a158d5b91f364a9f3c56e3037f03755daa19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To avoid unnecessary stack variables and to simplify code, add helper
macros to access the Bluetooth specific ACL and HCI user data that's
part of the buffers.
Change-Id: Idc337537721115c4091982c04f8a05bbbf0d5a19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I8df37d214e1f93ee472cde82c4198d667709ff5a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch performs the minimal necessary conversion to the net_buf
API. It uses a temporary "#define bt_buf net_buf" to make it possible
to convert the code in smaller increments. Most old bt_buf function
also serve as one-line wrappers to the matching net_buf APIs. Once
everything is converted these helpers will be removed.
Change-Id: Ie31433d33576022c9c193a35d2389267005545d6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no point in having a return value for uart_out() if it always
returns the same length that was passed to it. Just make it return
void and remove the error handling code from the caller (which would
never have been run).
Change-Id: I88dab7499a5f526ca65058640021f84e1b3486ca
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The reason why fifo_fill works in qemu but not on real hardware is
that qemu serializes all byte transmission 1 by 1. There is no
real hardware fifo emulated, and "fifo" depth is 1. On real
hardware, the controller owns an internal fifo, with a depth like
8 bytes on Quark x1000. And because of execution flow, how fast is
the controller etc etc... a fifo_fill call might fill in the
internal fifo of 8 bytes and then controller says "I am full"
(which means: "wait for the fifo to have space again"). That's
why poll_out() works: it does the same as fifo_fill and wait
that the internal fifo gets some space again before continuing.
And only when all bytes have been pushed in, it returns.
Change-Id: I452a6ebb2913c5e52ed01d999185e250aa3ed474
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The send() callback of HCI drivers should be returning 0 on success
and a negative value on error. The uart_fifo_fill() function returns
the number of transmitted bytes so it can not be directly mapped to
the send() return value.
Change-Id: I59be478c1985f44a46f2a9613f61471423b0e63a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the static device definition from the driver file,
drivers/bluetooth/uart.c, into the platform config files for
each platform.
This is another step towards converting UART drivers to
the new driver model. Also, platform config files are a more
logical place for the definition.
Change-Id: I668a52de5a38005b8b2bcb67d74437ead377cb16
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All driver Makefiles are adding the same cflags and they
have been done inconsistenly, make all drivers inherit
from the top level Makefile and remove unused includes.
Change-Id: Ie66d0ba7a418ac26f7eb709f50c887dc682e935c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make it clearer that these helpers are intended only for
Bluetooth-subsystem internal code, move them to a separate file.
Change-Id: Iea64780f5c61c1c96e12c9df378676bc49498fe4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BLUETOOTH_DEBUG_UART config option should depend on BLUETOOTH_UART
and also be sorted after it in the hierarchy.
Change-Id: I3e049e52c2e353cd0c6f1a99ca8934a289e0cce8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Buffers returned by bt_uart_evt_recv() and bt_uart_acl_recv() may be
NULL in theory. This makes code consistent by checking return value.
Change-Id: Id39def39c8b1c4c6eefc7b2bf01702c54b3e565c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit organizes the bluetooth Ksymbols in:
- Driver symbols at drivers/bluetooth/Kconfig
- Stack symbols at net/bluetooth/Kconfig
Change-Id: I8ebadeb8ac7f8a769d7620e4e44077a05915dc86
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefile and Kconfig files
to support the bluetooth driver in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I1f72b13aca8fb098eece04c4f0e1b680639b520f
Now that UART drivers are configured internally when it comes to
hardware specific information such as IRQ and registers (or mmaped
registers), bluetooth UART driver no longer needs to do it by itself. It
only requires to select the port it wants to use.
Change-Id: I5a30500f4b6f4155292609d0ed4a758f91930817
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The coding guidelines make an exception to the Linux kernel style
where all branches, even one-liners, should use braces.
Change-Id: I368930af3033eac15f0152a6671909e401d332e6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Configuration option BLUETOOTH_DEBUG_UART enables debug support for
Bluetooth UART driver.
Change-Id: I192f380be492df1a52ad212239447b6ee4b50aac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When the 'len' and 'min' parameters passed to bt_uart_read() are equal
the function is guaranteed to always return 'len' (it will keep
looping until that). This patch removes bt_uart_read() error checks
which would never occur in practice.
Change-Id: Icd879f1e15c6d33acc549155aabd24490098ffc5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some places where it's forgivable if bt_uart_read() wasn't
able to read as many bytes as requested. In other places it's not
acceptable (e.g. when reading ACL or event header). To avoid failing
in situations where we can handle receiving less data than requested
this patch adds a new parameter to bt_uart_read() to specify the
minimum required data amount.
Change-Id: I372e3af7aaa6bfabe14896eb10cc71c3deff94f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we're out of buffers the UART driver would previously loose sync of
where the packet boundaries go, because it was using the buffer itself
to store and parse the HCI packet headers. This patch modifies the
UART driver to use stack variable for initial header parsing, thereby
being able to always determine how many remaining bytes there are and
cleanly discard the bytes until the beginning of the next packet.
Change-Id: I278f3fc0c983e6a2a6904356ef1af1d25c9f06e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we get an invalid packet type here the buf pointer will be NULL.
Going to the cleanup section at the end of the function would trigger
a bt_but_put() call which would cause a NULL pointer access. Directly
returning from the function is the right thing to do instead.
Change-Id: I0c18646e0820cf829ef8aa3f77835ba0a14375b5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We may soon want to have a _wait() variant of bt_buf_get, so to avoid
the number of 'get' function growing too large consolidate the
existing get() and get_reserve() functions into a single one. The new
consolidated function also takes the type as input parameter so that
we know this from the very start and thereby plan for the split into
multiple buffer pools.
Change-Id: Ia09448565349def2be9bc08d9510fedd029480b4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon want to have dedicated pools for outgoing and incoming ACL
data. To know from which pool to get and put the buffers each buffer
should contain enough information to distinguish the two types. This
patch splits the old BT_ACL type into two new BT_ACL_IN & BT_ACL_OUT
types.
Change-Id: I7d3c05c26d2a70f80fb1229e245aa21673ec378b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple HCI UART (H4) driver that currently maps to
the second UART in the system. The main intention is to use this
together with qemu for accessing the Bluetooth controller available on
the host OS side.
The H4 HCI transport protocol is perhaps the simplest of the standard
HCI transports. It consists of a single byte in the beginning of each
packet which indicates the type of the packet: HCI event, HCI command,
ACL data, or SCO data (which we don't use at the moment).
Change-Id: I225a2a2361fbd7cd4ba82ea1f81ddc1271e9e7c2
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Andrei Emeltchenko