Make it depend on CONFIG_LEGACY_KERNEL being enabled.
Change-Id: Id5d3cd35a52d38bf7476ea8e51b71e2c687f0923
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original buffer fragments can be used to send back a reply directly
since Bluetooth doesn't add anything to then.
Change-Id: Ifeac0e6c3abbd527c79912abc5f5b833b0b52171
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The idle priority was not accounted for.
With this change, the philosophers demo runs in coop-only mode.
Change-Id: I23db33687bcf3b2107d5fc07977143730f62e476
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
If the system's priority inheritance priority ceiling is not the same as
the highest priority in the system, it was possible for a thread owning
the mutex to get its priority lowered instead of left unchanged.
Change-Id: Ic06a1c4a66322c2949b2ba2f53efa03200fb1fc1
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
-1 is reserved for the idle thread in coop-only mode and -1 does not
exist as a priority in preempt-only mode.
With this change, the philosophers demo runs in preempt-only mode.
Change-Id: Id15a6eafc7582966deaf0db9ed6960b5da74be33
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
In such a case, the system must take the idle coop priority into
account.
Change-Id: Ica5a4a7a659cb165073e9b8042a77ed23a6a662a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Coverity was warning about an array overrun that should never happen.
Add an extra check to verify that is indeed the case.
Coverity issue 152017.
Change-Id: Ie6269acaa85387ba051dbff87b4bfaab860517a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce a new callback to bt_conn_cb that allows the application to
decide whether the accept or reject an incoming connection parameter
request. If the request is accepted the callback allows the
application to also adjust the values to what it thinks are more
appropriate.
The Zephyr Bluetooth API allows multiple registered connection
callbacks, so in principle there may be multiple le_param_req()
callbacks. It's recommended for an app to just use one (for clarity),
but if there are multiple the app is responsible for managing
potentially different requirements. In the case of multiple callbacks
each callback will receive the modified parameters in case a previous
callback modified them.
Jira: ZEP-1474
Change-Id: I098db5791aac521f1edfa9fefdf847db0a27e3a5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BT_L2CAP_RX_MTU is counted starting with the BLUETOOTH_RX_BUF_LEN
variable, which doesn't include the BLUETOOTH_HCI_RECV_RESERVE
contribution (this would only be valid if we started subtracting from
BT_BUF_RX_SIZE).
Change-Id: I1ab3eaf8907946c56c2a9fe16b2074f3a3027a0f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_BUF_RX_SIZE is used for the RX buffer pool which is used for both
ACL data and HCI events. It should therefore not contain any
ACL-specific details. This patch removes the ACL header size from the
macro and instead makes taking it into account the responsibility to
the Kconfig option. Since buffer sizes are anyway rounded up to the
nearest multiple of 4 the default goes up from 70 to 76.
Change-Id: I41274d9131e7529d41c16bd66de95637fb150a29
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_RX_BUF_LEN shall not be used as RX MTU since it doesn't
account for ACL and L2CAP headers.
Change-Id: Ic3ebb4bd13d86a39174840f0ab625b66e863018a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add proper documentations for all of the callbacks that are part of
the bt_conn_cb struct.
Change-Id: Iabce1d08a84c3849307c436a2cc528edffc62242
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
ICS & spec compliance. CFC is mandatory post 1.0b spec where in
Aggregate FC shall not be used.
Aggregate FC is managed using FCOFF and FCON messages. This is for
the entire session which means that all the dlcs in that session
will be affected.
Implementation is done using binary semaphore wherein it will be
blocked when FCOFF is recieved and unblocked in FCON.
Once tx thread is scheduled then semaphore should be always available
until all the buf in queue is sent.
Change-Id: Ibfd2c4d033cef64c238ead83474f9e171572de1e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Bluetooth Core Specification v5.0, Vol 2, Part E, 7.8.12:
"The Supervision_Timeout parameter defines the link supervision timeout
for the connection. The Supervision_Timeout in milliseconds shall be larger
than (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is
given in milliseconds."
Let's remember that:
conn_interval is given in units N * 1.25 ms
sup_timeout is given in units N * 10 ms
sup_timeout_ms > (1 + latency) * (conn_interval_ms * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 1.25 * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 2.5)
yields:
sup_timeout_n * 4 > (1 + latency) * (conn_interval_n)
Change-id: I30ac1d375a1baaa3e61f4c29b1165110599e1f7c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reduces stack pressure a little bit, and also paves the way for
introducing an application callback for accepting an incoming
connection parameter update request.
Change-Id: Ib02c14e27cbe34f85d663f36abd0597683ae1dc1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Core Specification Supplement v7 defines one new ATT error code.
Change-Id: I4fe5341a6bbc57fd73e5a12fcc4dc72b643eab35
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When receiving notifications we should be properly matching against
the remote address of subscribed peers.
Change-Id: Ibcba1101aac418fd02f9068667f84e8294aade07
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Properly document the various APIs exposed by hci_driver.h.
Change-Id: Ic8daba4956e4c5d2cc6597556b55ab5221495ad7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename the elements of 'enum at_cmd_type' in order to follow the
name spacing. Which should have prefix of 'AT_' for each elements.
This patch also involves the renaming, corresponding handler
function of 'enum at_cmd_type' with prefix 'at_' i.e 'cmd_start' as
'at_cmd_start'.
Change-Id: I722a25954163c06e131b94042c6a18e1e3458f6e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename hci_le_rand to bt_rand and make its parameter types compatible.
This also includes updating rand_get() to use size_t instead of
uint32_t & uint8_t.
Change-Id: I4d434dfbbaf339b1bc7b451d358d07a291dd0375
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller bt_rand() ties into the hardware which uses less memory
and is more power-efficient than using the TinyCrypt PRNG.
Change-Id: I7570d18f3e84dae3d5c2d3322b5d37cd3e8f3b6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having TX buffers split into numerous pools has the downside of
increased memory consumption. This patch takes the initial step to
consolidate these pools into a single one, saving about 248 bytes of
RAM for a basic configuration.
Change-Id: I449ba18b44a9a6af68e9a2c44f19a9286eb88b14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses sys_slist_get function to get node and automatically, if valid,
remove one from the list.
Change-Id: I4cee6fbb064bf9644efdb7e6771e702b1f08678a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fixes not supported now format specifier.
Change-Id: Ia01ea3fd18acfeed6f4a3899334911dac1b76643
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
HTML documentation shows misaligned text that may be a bit confusing.
This issue was caused by wrong indentation. Furthermore, board specific
instructions to build the image does not include any instruction header.
This commit fixes the above described issues.
Change-Id: Ie965e09f32f46a9d69aac28c4b389084f06b31b6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Updated the README.rst describing how to setup the document building
tools on an Ubuntu system (listing versions of tools) and how to
generate a local copy of the html documentation.
Change-Id: I4ca1a99a48709b2313c479487abf42480c5af035
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
make build process less verbose and enable 'make htmldocs' from the top
tree without a need for ZEPHYR_GCC_VARIANT to be defined.
Change-Id: I385667e3d240205913fa806b7481d5ed4e83fbc4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was missing and all kernel objects belong to this group.
Change-Id: I3c31b168ca984b7d44cc5614a2e2bd5cc492cf50
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Running documentation scripts on the top directory shifted all links one
level dowwn and is breaking all incoming links.
Use a script to copy all RST files into the doc/ directory before
running sphinx and keep structure intact.
Jira: ZEP-1579
Change-Id: Iccff068430e2ddb29e172cd8ae920475815d199e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Anas Nashif