The test errors on Arduino_101 due to
limitations in power management driver
on the platform. Hence excluding this.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Remove this feature specific to QMSI and available through samples only
to allow for migration to tracing hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Commit 8525944c54
tests: power: refactor power_states test
Re-introduced CONFIG_ARC_INIT=n that isn't required and causes build
errors for sanitycheck.
Fixes#9444
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Refactored test to work with ztest framework
and to calculate and display time in milliseconds
for each power state.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Do not enter Low Power states once the test execution is done. This is
is needed to avoid the flashing issues which were seen when system is
in deep sleep states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Enter SYS_POWER_STATE_CPU_LPS_2(C2LP) state on Lakemont to achieve
the Low Power Sensing Standby(LPSS) state on Quark SE C1000.
Also added a busy loop to have syncronization b/w x86 and ARC
console outputs.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
On Quark SE, to enter the Low Power Sensing Standby(LPSS) State,
ARC can enter the Deep Sleep state (LPSS bit enable + SS2) and
wait for the Lakemont core to enter C2 or C2LP state.
To achieve LPSS, ARC core enters the Deep Sleep state much before
the Lakemont core enters the C2 or C2LP state and waits for the
LPSS entry.
Also fixed the Deep Sleep state entry according to the Quark SE C100
documentation.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Define or enable the power states as per architecture (x86 or ARC).
Remove the redundant and unneccessary config options from
prj_tickless.conf file
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
These symbols were removed in commit ed26b95746 ("drivers/gpio:
Removing dts generated options in QMSI Kconfig").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No such generic UART symbols ever existed, afaict. Maybe some
board-specific UART was meant to be disabled.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
For baffling reasons, the ARC objdump is crashing when
creating the disassembly for the power/multicore/arc
test.
It is known that the patch for adding user mode support
to k_queue objects introduces this issue, but why objdump
crashes is yet unknown.
The compiler problem is tracked in #7608
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabled compiler definition flag TEST_CASE_SLEEP_SUCCESS
which was missing on migrating to cmake.
Signed-off-by: Nirmala Devi <nirmala.devix.m@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In tickless kernel mode, time parameter of _sys_soc_suspend is in
milliseconds. Based on the kernel mode use the correct
mulitplier to convert to seconds.
Jira:1821
Change-Id: Idf156f56ece79a82729ebb124d1552a5eeb69e25
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After QMSI 1.4 update, the alarm callback is not saved when
'alarm_en' is set to zero during RTC configuration. So this
patch fixes tests/power/multicore/lmt application according.
ZEP-1778
Change-Id: Ie1468458bc23a6394484aef2aeee97745d5d23b8
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
We're using SPDX tags for Apache 2.0 licensing instead of the
Apache 2.0 boilerplate comment block.
Change-Id: I9e56f918ab4ed4d127dbe64538c9fa62886386a8
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
The app passes the index into an array storing power states
instead of the power state to _sys_soc_power_state_post_ops
Jira: ZEP-1341
Change-Id: I6ddf0a2dbadfd06aafbcafa88be7441e99694a51
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Coverity detected some constant value in the vars, due to the
exclusive config select in the code.
Change-Id: Id27b658f3cd70dce626fef054457a9c726b3b957
CID: 151974, 151972 and 151971
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
testcase.ini was not building for ARC. This app would
run on x86 and arc.
Change-Id: I961d56079aa1db7d84e0fcc87780ba11d7f4d831
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
tests: power_states app updated to support SoCWatch collection
Add CONFIG_SOC_WATCH option for enabling the SoCWatch
QMSI driver and associated instrumentation hooks.
Bug fix for soc_watch.c to use local irq_lock/unlock
This will be put into QMSI as well.
JIRA: ZEP-1121
Change-Id: I0514324e81ca02c1d01ffc2d6cf4d31aee491544
Signed-off-by: Jon Moeller <jon.moeller@intel.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Anas Nashif