move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The defines should have had a _0 on them, now that we generate the
proper defines, fixup the cases that used that old scheme.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
I2C transfers could simultaneous be called that would
cause an inconsistent state in NRFX I2C state (and HW).
The NRFX TWI driver would expect to be in state
`NRFX_DRV_STATE_INITIALIZED` while being in state
`NRFX_DRV_STATE_POWERED_ON`.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
When running sanitycheck for reel_board which selects
CONFIG_NRFX_TWIM it fails the following tests:
tests/misc/test_build/test_newlib
tests/kernel/errno/kernel.common.errno.newlib
tests/lib/mem_alloc/libraries.libc.newlib
/zephyr/drivers/i2c/i2c_nrfx_twim.c:144:3: error: expected declaration
specifiers or '...' before '(' token
(bitrate == I2C_BITRATE_STANDARD ? NRF_TWIM_FREQ_100K \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:151:3: note: in expansion of macro
'I2C_NRFX_TWIM_FREQUENCY'
I2C_NRFX_TWIM_FREQUENCY( \
^~~~~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
/zephyr/drivers/i2c/i2c_nrfx_twim.c:154:3: error: expected declaration
specifiers or '...' before string constant
"Wrong I2C " #idx " frequency setting in dts"); \
^
/zephyr/drivers/i2c/i2c_nrfx_twim.c:184:1: note: in expansion of macro
'I2C_NRFX_TWIM_DEVICE'
I2C_NRFX_TWIM_DEVICE(0);
^~~~~~~~~~~~~~~~~~~~
zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/build.make:62: recipe
for target
'zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj'
failed
To fix this, let's replace the use of static_assert() with a more
generic macro: BUILD_ASSERT_MSG() This should work across minimal
libc, newlibc and c++.
Signed-off-by: Michael Scott <mike@foundries.io>
Current implementation had fixed initial speed, this commit
fixes TWI and TWIM shims to use configuration from DTS.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
10 bit addressing is still not supported on nrf chips, but now
I2C_MSG_ADDR_10_BITS flag is checked.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
SDA and SCL pins can now be configured through DTS.
Pins on development kits have been assigned according to arduino
headers.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Changes add a translation layer to make nrfx TWI and TWIM drivers
work with Zephyr API.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Anas Nashif