Remove references to k_mem_pool_defrag and any related bits associated
with mem_pool defrag that don't make sense anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
A space-constrained device wouldn't enable this feature.
Fixes build errors since these tests constrain the size of
the IDT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
nrf SOCs use external timer for measuring benchmarking stats.
Earlier this timer is programmed in 24 bit mode, due to which
is is getting expired in some of benchmark stats like mutex
lock/unlock. So configuring to 32 bit mode to avoid overflow.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some of benchmark stats were not reported for nrf52/52 based SOCs.
This was because nrf based SOCs use external timer.
In timing info some of benchmark stats still use systick based APIs.
Due to which benchmarking number was not getting reported. So change
it to timer based for nrf.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
nrf SOC uses nrf rtc timer (not sys tick), which is 32kHz,
whereas CPU runs at higher speed (nrf52 runs at 64MHz).
So 32Khz is too slow to measure critical kernel parameters.
This patch does :-
1. Add support for nrf SOC for timing_info benchmarking.
2. Uses SOC timer to measure kernel parameters.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The API/Variable names in timing_info looks very speicific to
platform (like systick etc), whereas these variabled are used
across platforms (nrf/arm/quark).
So this patch :-
1. changing API/Variable names to generic one.
2. Creating some of Macros whose implimentation is platform
depenent.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This was failing to build when the PWD was not that of the
tests/benchmarks/object_footprint because it was asking to load
$(PWD)/Kconfig.
Kconfig shall be specified with no directory location, as the file
will be imported relative to to Zephyr app's directory.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The size of the interrupt descriptor table is not really
relevant to this test.
If any driver enabled for the target board gets enabled and
has a priority level outside the IDT range, gen_idt.py is properly
reporting an error. The old C-based gen_idt seems to have allowed
this to slide by.
Issue: ZEP-2496
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabled the boot_time test on ARM SoCs, set __start_time_stamp on ARM
since we don't have a free running counter similar to TSC on x86.
Also moved to printing the values out as %u to increase the range of
values.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Changed _tsc_read() to k_cycles_get_32(). Thus reading the
time stamp will be agnostic of the architecutre used.
2. Changed the variable names from *_tsc to *_time_stamp.
JIRA: ZEP-1426
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update the arm.conf to enable CONFIG_FLOAT for the float test and use a
filter on that so we only run/build the test on SoCs/boards that support
floating point hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The error was generated by a piece of code that is
not currently being used. This piece of code was kept to measure
the overhead caused by the benchmarking code on x86.
JIRA:ZEP-2160
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Static code analysis reported some kernel APIs were used without
reading the return value. Since the benchmark doesn't need error
conditions, a simple read of the values followed by a ARG_UNUSED
is used to handle static code analysis errors.
JIRA: ZEP-2134
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need a bit over 32k of memory to build/run the app_kernel benchmarks.
Change-Id: Iddfeb073f8ea87dc6323775a288b83efa88fdaea
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Anas Nashif