- Provide the irq flags to IRQ_CONNECT_STATIC
- Provide the actual IRQ for that controller
Change-Id: If660baca7e92065cfdb588a2ae86ff13da0918eb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds the I2C driver for the Sensor Subsystem on Quark SE.
This provides minimal support for the I2C controller, and does
only synchronous transfer at the moment.
Change-Id: I400b8ff3390d4b641bed5b8c617830c4217de3ff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Somehow through the process of enabling Galileo, we have partially lost
the functionality needed to enable I2C1. Bringing back the I2C
configuration options for I2C1 to the DW IP block.
Change-Id: I296bd9c3d167969df5b2fe17627633f5ec4b1ba4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Such settings belong to Galileo and thus are set in Galileo Kconfig.
Change-Id: Ib9ec721fcc68e92521f8b7690c2640eeb82b2f4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
On some platforms (e.g. Galileo), the I2C controller is on PCI bus,
which shares IRQ with other devices (GPIO on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: Id4e4714aed37c2893d0ffe9ed1e4edaabb338121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The interrupt selectionss are no longer specific to a particular
controller (e.g. I2C_DW_0), but apply to all controllers on
the platform.
[DL: Extracted these changes into their own patch, instead of
being squashed with others. Also modified the Kconfig
options to move them into proper position.]
Change-Id: Idc7ac9769e947447b868dccf772a95dbb5fc8021
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds the Kconfig option to specify default configuration
for the I2C controller during driver initialization.
During boot, the controller needs to be configured before
communication to slave devices can start. After boot,
an app can re-configure the controller if needed.
Change-Id: I7bf252f75a31943ae444e4d914f3a9a1a3f3d91f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes variables readable and consistent with other drivers
we have.
Change-Id: I816f133279497eafd5d5614013c8d224d5909590
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Tomasz Bursztyka