add acpi pnp/hw id for pcie node to enable support for retreive
interrupt routing information for pci legacy interrupt via acpi
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Rename old rpl_crb to rpl_s_crb, which is needed for adding other
Raptor Lake boards. Main changes should be in the board device tree
configuration raptor_lake_p vs raptor_lake_s.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add a new SPI shim driver for Intel SoCs. Builds upon the SEDI bare
metal SPI driver in the hal-intel module.
Co-Authored-By: Kong Li <li.kong@intel.com>
Signed-off-by: Ye Weize <weize.ye@intel.com>
The old CONFIG_UART_NS16550_ACCESS_IOPORT has been used to
indicate whether to access the NS16550 UART via IO port
before device tree is used to describe hardware. Now we have
device tree, and we can specify whether a particular UART
needs to be accessed via IO port using property io-mapped.
Therefore, CONFIG_UART_NS16550_ACCESS_IOPORT is no longer
needed (and thus also CONFIG_UART_NS16550_SIMULT_ACCESS).
Remove these two kconfigs and modify code to use device tree
to figure out how to access the UART hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As per #26393, Local APIC is using Kconfig based option for
the base address. This patch adds DTS binding support in the driver,
just like its conunter part I/O APIC.
Signed-off-by: Umar Nisar <umar.nisar@intel.com>
This enables the power management for Intel ISH. It supports D0i1,
D0i2, D0i3 power saving modes for ISH.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
Without status line, watchdog is enabled by default. The desired
behaviour is to have it disabled and enable only when watchdog
is used, with overlay files. The same way how it is done for
samples/drivers/watchdog and tests/drivers/watchdog/wdt_basic_api.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add watchdog support to ELkhart Lake board basically copying
configuration from Raptor Lake.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Disabled uart0 and uart1 by default in alder_lake.dtsi and enable only
for intel_adl_crb board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds a new I2C shim driver for Intel SoCs. Builds upon the SEDI bare
metal I2C driver in the hal-intel module.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
It's used to pass right device index to hal_intel module.
DT_INST_FOREACH_STATUS_OKAY() does not guarantee the node ordering.
Signed-off-by: Dong D Wang <dong.d.wang@intel.com>
Added RTC driver that supports Motorola MC146818B
Enabled RTC set/get time and alarm, alarm callback
and update callback.
Counter and RTC uses same hardware in case of
Motorola MC146818, so they can't be used at a time.
Updated stand-alone mc146818 counter dts instances
to support rtc and counter with same compatible
string of "motorola,mc146818" on ia32, atom,
apollo_lake, elhart_lake and raptor_lake platforms.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Added UART instances and changes to enabled
support for PCIe UART instances.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
This adds a basic Intel TCO watchdog driver. The driver doesn't support
windowed timeouts (a non-zero window.min value) or callbacks. The driver
currently assumes TCO version 6, which can be found e.g. on Elkhart Lake
and Raptor Lake platforms. The driver also expects the TCOBA base
address to be specified through DTS, rather than doing runtime lookup
(using e.g. ACPI or PCIe).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Najumon B.A