The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert the can_mode enum to a bit field to prepare for future extensions
(CAN-FD mode, transmitter delay compensation, one-shot mode, 3-samples
mode, ...).
Rename the existing modes:
- CAN_NORMAL_MODE -> CAN_MODE_NORMAL
- CAN_SILENT_MODE -> CAN_MODE_LISTENONLY
- CAN_LOOPBACK_MODE -> CAN_MODE_LOOPBACK
These mode names align with the Linux naming for CAN control modes.
The old CAN_SILENT_LOOPBACK_MODE can be set with the bitmask
(CAN_MODE_LISTENONLY | CAN_MODE_LOOPBACK).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to bring consistency in-tree, migrate all modules code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Support for the can_get_max_filters() API function is optional and may
not be supported by all drivers.
The check for an adequate amount of filters is just there in order to
fail early. If the driver does not support can_get_max_filters(),
reporting of a failure will be delayed until a filter addition fails.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The CANopenNode stack does not support CAN-FD. Depend on it being
disabled and explicitly disable it in the CANopenNode sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Include a pointer to the CAN controller device for the CAN
transmit, receive, and state change callback functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Increase the default CANopenNode stack sizes a bit. The current stack
sizes are too small for e.g. ST STM32F3, likely other platforms as well.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Switch from using can_configure() to using can_set_mode() for disabling
CAN controller transmissions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Set a thread name for the tx_workq thread, so that it shows up in
"kernel stacks" when the shell or thread debugging are enabled.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The previous CONFIG_CAN_MAX_FILTER is specific to certain drivers.
Using the new API makes the CAN open driver independent of the used
CAN hardware / driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Dominik Ermel