AN521 is a dual core FPGA on MPS2+ with both cores are CM33. Add openAMP
to support on it.
Core 0 is primary core, it runs as master, core 1 is remote, it runs
as slave.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add configuable shared memory address for openAMP samples. There is a
plan to add more platforms supported for openAMP in zephyr.
Each platform can specify the shared memory address and device by
device tree and add it's support in openAMP samples.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The documentation motivates this function by saying it is more
efficient than the core 64-bit version. This was untrue when
originally added, and is untrue now. Mark the function deprecated and
replace its sole in-tree use with the trivial equivalent.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sample contained calls that were not using the return
value, which was detected by Covery Scan as an issue. This
commit fixes it by changing to (void).
Fixes#18378
CID#203537
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Fix the Python3 CANopen module installation instructions to refer to
the 'python-can' package instead of the nonexistent 'can' package.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Reduce the default timeout in the CANopen sample from 50 milliseconds
to 1 millisecond. This vastly improves performance of the sample and
matches the example code present in the CANopenNode stack.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Converts the sdhc spi driver to the new gpio api. Updates device trees
for the olimexino_stm32 and nrf52840_blip boards to set appropriate
active high/low polarity for the spi chip select pin.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Convert the sample to use the new GPIO API and additionally:
- add some error messages for unsuccessful GPIO API calls
- correct the index of `def_val` element used in the `right_button`
callback, to match the one used when the callback is installed
- use flags defined in devicetree for the pin that drives the LED
(for consistency, as this does not make much difference for a pin
that is only toggled)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added support for native_posix targets.
Added setting FS back-end initialization which is used by
native_posix targets.
The test harness was adapted to the fact that key-value pairs
read-out order might be different for each back-end when call
settings_load().
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added sample for the settings subsystem.
The sample shows how to:
-initialize and register handler
-implement handles
-save and load data using registered handlers
-load subtree
-save or delete a certain value
-load subtree values or a value directly
- example on how to write data to the
setting destination and how to read data
from the setting destination using runtime API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Adjust the configuration file, disable the SPI
driver and enable the QSPI driver and flash node.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
A configuration file attempted to select the external flash memory for
this platform, but there was no overlay that redefined the storage
partition to be on that device rather than the SOC flash.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
With a recent change introduced a connectable advertiser will reserve
a connection object when started. In the disconnected callback the
disconnected connection object is not yet released, so the application
is not able to allocate this connection object for a new connectable
advertiser until after the disconnected callback.
reserve conn commit: 46bf20036a
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
NFFS configuration was removed.
Added working configuration for nRF boards.
Documentation aligned to fact that littlefs is supported.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch addapt the sample to using LittleFS as the FS back-end.
After NFFS will be removed this ensures mcumgr FS command functionality.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
smp_svr cleanu
Add sample demonstrating the integration of CANopenNode in Zephyr to
support the CANopen protocol.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The $srctree environment variable is already set to point to the Zephyr
root, so no need to do
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
in samples. Just
source "Kconfig.zephyr"
works.
(Things would break if $srctree was set to anything else, because every
'source' in the Kconfig files will be relative to it.)
Also add a 'mainmenu' title to the littlefs sample. It shows up at the
top of menuconfig/guiconfig. Source Kconfig.zephyr instead of Kconfig to
avoid overriding it.
As a sidenote, $(FOO) is better $FOO in Kconfig. $FOO is legacy syntax
that Kconfiglib only supports to be compatible with old Linux kernels.
$(FOO) uses the Kconfig preprocessor.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit introduces a new Kconfig symbol MCUMGR_SMP_BT_AUTHEN.
When selected it configures the Bluetooth mcumgr transport to require
an authenticated connection.
If the Bluetooth mcumgr transport is selected then this new symbol is
selected by default. Bluetooth SMP is also selected to ensure Zephyr
is configured with Bluetooth security features enabled to provide
Bluetooth authentication APIs to the user's app. Users can choose to
disable this level of security for the Bluetooth mcumgr transport if
they do not require it.
Fixes#16482
Signed-off-by: Nick Ward <nix.ward@gmail.com>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remote wakeup for Nordic SoCs should always be enabled.
Thus do not depend it for each SoC. Instead depend it on
chosen driver.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This test is failing on platforms requiring a bigger stack size. This
issue is fixed by adding the missing CONFIG_TEST_EXTRA_STACKSIZE to
tweak the thread stack size.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
By adding new SoC to Zephyr drivers has to be updated.
Commit affects:
- USB driver
- support for nRF52833 added.
- support for USB_DEVICE_REMOTE_WAKEUP in hid-mouse added.
- SPI
- IEEE 802.15.4
- CLOCK CONTROL
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
convert sample and test yaml filters that utilize a DT_ define to
instead use a dt_ function. The intent is to remove the Kconfig
generated DT defines and just make directy queries into the device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kumar Gala