Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In commit bf4fb51f44, "net: if: Add NET_IF_UP flag"
a reference to ctxt->iface was added in the ipsp_disconnected function.
Let's add the ctxt variable definition to fix the build break.
Change-Id: Ib06047e333504f3db4fe175fb3ef1dce347e1916
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If the length of all fragments is used instead, the TCP header is also
considered; sequence numbers do not consider the header.
Change-Id: I19e77ac0fe62ca619b0903dd0265f8ea4878cdf7
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The net_buf_frags_len() function returns a size_t, which is an unsigned
integer. Store on an appropriate size_t variable instead.
Change-Id: I98aa4c0ddd7c464737436aa9ce13bdc86c11da2b
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
TCP packets need the computed packet length early so they can fill in
a correct sequence number in their generated ACKs. Waiting for
packet_received() is too late. Precompute it before needed, and skip
the evaluation later.
Change-Id: I25547009f88277e0042c74f2005a141819797886
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On accepting a new connection, the stack does an odd "swap" trick
where it updates the struct net_tcp record on the *listening* context
with the values from the new connection, and then swaps it with the
empty one that got allocated for the *new* context.
Unfortunately this swap forgot to swap the net_tcp "context" field
backpointers, so the net_context retrieved at runtime was for the
wrong connection. Surprisingly, this actually almost worked for a
long time, except that the destination address would be wrong in the
newer setup.
Change-Id: I0c1812ddb9f9ff3e7deb60d1fd67cafd9ba96997
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The source address for a TCP SYNACK must (obviously) be the same as
the destination address of the SYN that produced it. But the existing
IP packet creation routines would simply fill in a default address
from the net_context struct, which is correct for *established*
connections, but for the listening socket is generally INADDR_ANY
(i.e. all zeroes) and will result in an arbitrary choice for source
address (e.g. a link-local address on the same interface) which can
easily be wrong.
So we need to pass the correct address all the way down from the SYN
packet handler code through the net_ipv*_create() packet creation
functions. This requires lots of API plumbing, but relatively little
logic change.
Change-Id: Ic368f8cef6689f8a27cbafd5933a4964d5cc457e
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This one exposes IEEE 802.15.4 net mgmt requests through the shell. User
has then the ability to directly make relevant requests like raising a
scan, associating, etc...
For now, it assumes the 15.4 interface is the only one on the system and
thus will rely on net_if_get_default().
Change-Id: I8eb20565b8231e6cfcba6c1479179cc85ff1d8e5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is then possible to set the channel, pan_id and short address through
this API. Such features are mainly useful for testing purposes.
Change-Id: I41aeb397afdb231458a3b13638f3e13d3ac28a6c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When a CNAME is part of the DNS answer RR, sometimes a label with
a pointer is found. The CNAME must be reused to create a new DNS
query and that CNAME will become the new DNS Query QNAME. This new
QNAME must not include pointers.
This patch introduces the qname_copy routine that "linearizes" a
given QNAME (perhaps with pointers).
The dns_read routine is also updated to reflect these changes.
Change-Id: I8e8f64e85e2cbf494fd589e2b7a67d470d34604b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the mqtt_subscriber_parser routine and modifies the
mqtt_init routine to allow an MQTT subscriber app to receive MQTT msgs.
Change-Id: Ie54ab892dacbc4386acab78a8991eba1850d8171
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Changes applied by this patch:
- Add the mqtt_publisher_parser routine
- Add the MQTT_PACKET_TYPE macro to get the MQTT msg packet type
(required by mqtt_publisher_parser)
- Add the mqtt_linearize_buffer (required by mqtt_publisher_parser)
- Add the mqtt_recv callback for reception
- Modify the mqtt_init routine to install the reception callback
The mqtt_publisher_parser routine is a callback used internally
to execute the appropriate mqtt_rx routine. Only the following
messages are handled by this routine:
MQTT_CONNACK, MQTT_PUBACK, MQTT_PUBREC, MQTT_PUBCOMP and MQTT_PINGRESP.
On error, it executes the ctx->malformed cb, if defined.
This commit also introduces the mqtt_linearize_buffer routine that
will be used to linearize an IP stack fragmented buffer. This patch
makes use of the net_nbuf_linear_copy routine to linearize the
incoming buffer. mqtt_rx_xxxx routines are also updated to handle
linear buffers (no fragmentation).
Currently, all the network protocol routines assume that the input
buffer is not fragmented. Future versions will remove that assumption
and the mqtt_linearize_buffer routine will be removed as well.
Public MQTT API is not affected by this patch.
Change-Id: I02fece67052ffbc7cb393d5ca545c503da463c4b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Avoid undesired behaviors by exiting once an error is detected.
Change-Id: Id8e6accd6cd096274fe1c40a615d290967f1d4b9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit improves the buffer error handling in the mqtt_tx
routines.
Change-Id: Ic8e5761d927fe881b2376b6ac948a412e3b1168a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The mqtt_rx_publish is used to process incoming MQTT PUBLISH
messages. This routine performes the following steps:
- take ownership of the rx buffer containing the MQTT PUBLISH msg,
- call the MQTT parser routine, and
- determine, based on the incoming message's MQTT QoS,
the next action.
Change-Id: I3cc011cf0c280205161d0484f12a2cfa79fdf44a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the appropriate data type for some variables:
- const input arguments
- int32_t instead of uint32_t for timeout
- uint8_t instead of int for variables that take just a few
possitive values.
Change-Id: Id7d762b400fa17e6751829ac401cd7c13aabb7b2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit changes some function signatures found at the private
MQTT Packet Lib. Input arguments representing arrays can be considered
'const', avoiding compiler warnings when passing "const arrays" in
MQTT applications.
Change-Id: I3ebaa9c7ff5fba74324bf79c55027cdd82669eaa
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds one routine previously found at the DNS resolver
library. The net_nbuf_linear_copy routine allows to "linearize"
an IP stack network buffer. This routine is required by functions
that must jump between big chunks of data that in this case may
lie between many fragments. Tracking fragments may be a tedious
task, so getting a linear copy of the buffer will reduce code
complexity altough it increases memory consumption.
The DNS client library is updated to reflect these changes.
Change-Id: Iae321f99fa9b05fae7e722b6d41baac427d82d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
PAN coordinator can decide to eject a client device from the PAN by
disassocating it.
Change-Id: Ia868554d40a7aceb4c75a0b426db45f56003fbb7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If associated, this will request to disassociate from the PAN. That's
only client side, PAN coordinator can also disassociate a client, which
case is not handled here.
Change-Id: If308f51b62c5006b4a2db53d0c891e8192f3c198
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Active scan differs from passive scan by sending a Beacon request (thus
the "active" part) and wait for beacons in reply to it.
Taking the opportunity to add debugging output to scanning logic.
Change-Id: I85001b1ea17f4ec4cd315dc39524c4d8f053cee2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now we can handle incoming MAC command frames.
Association result ONLY for now.
Change-Id: Ib54b1757185ed079fe6914fa7939347020e006d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such management request will enable association the 15.4 device to an
existing PAN.
Change-Id: I61ffd5e4d8192716e067c5225b3327f08944063b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is used only for scanning at this point. But will be needed to get
slots information and else in the future.
Change-Id: Ib917469134c6ba5a54485847c612d3755f62ed35
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, as only CC2520 device is supported: it will loop over the 16
channels present in 2.4Ghz spectrum. However, this will need refinement
as soon as other spectrums will be in use: L2 layer could request
capabilites from the device in order to know which range to use.
Scan result is done one at a time for now. It's unlikely going to fit
all production use case, so it's going to change in the future.
Change-Id: I2fafec49eb5cbfca1a4f04107ba3b6511d7d956d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can be thus used to track the status of network interfaces in order
to act accordingly (no need to try sending things on network if the
interface is down for instance).
Change-Id: Ie160ef0dfdad6679d531d05a7abada96ad1de7db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds enable callback which can be used to notify the L2 driver about
changes of interface state, the L2 driver can then check if the new state
is allowed and reject otherwise.
Change-Id: I4bb6b1e32be2633f24694c0246585f803f8c645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_IF_UP flag support indicating the interface is up,
currently this shall only be used internally by the driver, later on it
shall be possible to make it public by using dedicated functions.
Change-Id: I38090da4030395b2341733b846004789416d61c1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
And it's not really a debugging option either, one might want to use it
for the features it brings. Thus moving it out of Kconfig.debug.
Change-Id: Ie1e2d2bcba94ad4b8354d3cc56087227184039b6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's possible to know from which pool the nbuf comes from so
let's reduce nbuf size by removing its internal type attribute which
becomes then useless.
When a data buffer is not coming from nbuf data buffer pool, let's call
it "EXTERNAL", just to make debugging handling a little simple in the
code.
Change-Id: I6931394c8c4f594137f6380be0a0ba5cea371040
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the interface function rather than writing directly to the iface
structure. Check for errors in nbuf read.
Change-Id: I75311755c2060b640325962ada28adea597cb914
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Detect non local IPv4 destination addresses earlier and route them via
the gw address. Ensure that the ARP table is populated with the GW
address rather than the final destination address.
Jira: ZEP-1473
Change-Id: I3b628584148b760340ef0fea4da4e8893702c832
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
s/energy_est/estimation when using net_rpl_node_energy_object.
Change-Id: I4b326a0dbbca11d48de0c595dfe843495fe10e04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's much different than IPv4 where it's possible to find the whole
packet length. Here it has to count also the ipv6 header size by itself.
Jira: ZEP-1422
Change-Id: I84b1602ac75ef81b9ceda7898ca9dedf2e54d633
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User application can request the information it wants via the generic
net_mgmt() call, following the NET_REQUEST_STATS_* codes.
Change-Id: Ia9e7d318cf11b7bf8bfaf1ad63c8c985be846cc1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's change from macros to inlined function to make things nicer.
Change-Id: Ie98e0667613961b03c84ca60bc551d0f473765f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file will own more statistics handling in a near future.
Change-Id: Ifaf86852f5c7166e6878b5dc8f4cd4c166dbee90
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It clutters a bit the code with ifdefs but it's quite useful when
debugging.
Change-Id: I4f6899d052921b8ef8a7ec2f6e7df927a1bca2f1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
printk is anyway the routine being selected for sys_log.
Change-Id: Id6b516aa6ab8d4d420b9afe22b5e6b832dd3e216
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Anas Nashif