This commit adds CAN support for nucleo F746zg.
Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h
CAN_RX: PD0, CAN_TX: PD1
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Missing quotes are accepted in some places for compatibility with the C
tools, e.g.
source no/quotes/Kconfig
menu Title
It looks broken though. Fix the two places in Zephyr that skip the
quotes. A style warning will be added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Allows to enable initial RTS/CTS hardware flow control
in the dts.
Co-authored-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
The SYSCFG_CFGR1_PA11_PA12_RMP define is present even on packages where
the remap isn't strictly required. This commit makes the remap optional
based on a DT property.
Also fixes syntax error caused by a missing );.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit d4b4b99272 as it
introduced unwanted side effect: It moved the k_busy_wait() to other
clock that the one driving system timer and k_cycle_get_32(). As result,
delays created using these interfaces not matched each other.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Not all i.mx rt socs have the same number of irqs, so move the default
configuration from the soc series level to the individual socs. The
rt1020 hardware reference manual (IMXRT1020RM Rev.1 12/2018) incorrectly
documents 160 irqs (#142-159 reserved), but the soc actually has 142
irqs.
Fixes tests/kernel/gen_isr_table for the mimxrt1020_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add SYS_POWER_ prefix to HAS_STATE_SLEEP_, HAS_STATE_DEEP_SLEEP_
options to align them with names of power states they control.
Following is a detailed list of string replacements used:
s/HAS_STATE_SLEEP_(\d)/HAS_SYS_POWER_STATE_SLEEP_$1/
s/HAS_STATE_DEEP_SLEEP_(\d)/HAS_SYS_POWER_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit cleans up names of system power management functions by
assuring that:
- all functions start with 'sys_pm_' prefix
- API functions which should not be exposed to the user start with '_'
- name of the function hints at its purpose
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Plain 'source' is globbing. 'gsource' is a leftover from an older
design, and works as a synonym for 'source'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
On STM32F3 devices, a trick was required for normal use of registers.
This was actually an issue in flash registers defintions which should
be defined as volatile.
Fix this and additionaly, fix definition for STM32F1 which was also
lacking the volatile instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The iMX RT1060 and RT1064 have additional dedicated 512KB on-chip ram.
This OCRAM2 is mapped at 0x20200000, formerly OCRAM1 (flexram) mapping
which is moved to 0x20280000 in order to guarentee global OCRAM memory
continuity regardless OCRAM1 size configuration (256KB by default).
In default configuration, this gives 768KB (512+256) on-chip ram:
0x20200000 to 0x202BFFFF.
OCRAM2: 0x20200000 - 0x2027FFFF
OCRAM1(FlexRam): 0x2028FFFF - 0x202BFFFF
Add this memory region as a single node in the rt1060 device tree.
Note: MPU expects power of two memory region, in case of 768KB, let
the MPU configure 1MB instead.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
On stm32f4 series, uart4 is not an usart, so generated with
'st,stm32-usart' compatible and hence generated defined should be
prefixed with DT_ST_STM32_UART_ rather than DT_ST_STM32_USART.
Fixes#14542
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The clang ARM assembler is a bit stricter than GNU as, make a few
changes so things build with both
Signed-off-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The Kconfig.defconfig.efr32* files added redundant dependencies on
SOC_EFM32* that are already added in the Kconfig.defconfig.series files
that source them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
There are some implicit rules in STM32 family Kconfig.defconfig
fragments organizations.
Add comments to explicit these rules.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
GPIO port H is available on all SoCs of L4 series.
Move Kconfig GPIO_STM32_PORTH symbol deifnition to series Kconfig
fragment Kconfig.defconfig.series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This value always comes from DTS. No Kconfig symbol named
NS16550_REG_SHIFT ever existed.
Might've been missed in commit 603f068690 ("uart/ns16550: Use DT_ prefix
for remaining device configs").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
nRF52810 Flash and SRAM sizes do not have power-of-two values.
This commit reduces the amount of MPU regions reserved at boot
time to enforce basic permissions in Flash and SRAM memory. It
does this by selecting the next power-of-two size for the Flash
and SRAM regions, respectively. In this way we can cover the
entire Flash and SRAM space each with a single MPU region, thus,
save two MPU regions to be used by the kernel/application.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the recent MDK brought by nrfx 1.6.2, these legacy peripherals have
been revealed as available also in nRF52810. This patch allows their
use in Zephyr drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The i.MX RT1064 evk has one ethernet (10/100M) connector via KSZ8081RNB
phy. Enable related dts nodes and config flags
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
iMXRT1064 has 4MB on-chip Flash memory (flexspi2) mapped to 0x70000000.
Add it as configurable code location for MIMXRT1064-EVK board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit removes dependency on SYS_POWER_LOW_POWER_STATES_SUPPORTED,
SYS_POWER_DEEP_SLEEP_STATES_SUPPORTED Kconfig options. Power management
SYS_POWER_LOW_POWER_STATES, SYS_POWER_DEEP_SLEEP_STATES options depend
now directly on specific power states supported by the given SoC. This
simplifies maintenance of SoC Kconfig files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Follow the pattern we have for other peripherals in that if the driver
class (CAN) is enabled than enable the driver for that class
(CAN_STM32). Also have the STM32 CAN driver depend on being on a STM32
SoC.
Remove setting of CONFIG_CAN_STM32 in any .conf files as it will get set
of CONFIG_CAN is set/enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds sys_set_power_state() function with support for EM1
Sleep, EM2 Deep Sleep, EM3 Stop power modes on Silabs SoCs.
Tested on efr32_slwstk6061a board.
Note: No support for efm32hg, efm32wg series at this point due to the
missing possibility of placing function code in RAM, required by errata
in SiLabs library code.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
'soc' logger module may be used by any SoC related code located in soc/.
An implementation file requiring logger services should include
LOG_MODULE_DECLARE(soc, CONFIG_SOC_LOG_LEVEL);
to use the 'soc' logger instance.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
We should be selecting CPU_HAS_ARM_MPU at this level and not
CPU_HAS_MPU. Change the cases of CPU_HAS_MPU to CPU_HAS_ARM_MPU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit removes "select SYS_POWER_*_SUPPORTED" entries from
Kconfig on SoCs which are not implementing sys_set_power_state()
method used to control power mode.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
A common driver is shared between stm32 chips, which was not the case
for stm32f3 series. As a consequence stm32f3 was not maintained
equally and was missing features such as flash layout or dts based
configuration.
Besides, drivers had some flows such as wrong bus clock and
missing HSI clock activation which lead to issues on boards not
using HSI as main clock.
As a consequence this commit moves stm32f3 series flash driver to
common stm32 flash drivers.
Fixes#4197
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Refactor the imx rt code/data location config defaults such that we
default to on-chip memories at the soc level and override to external
memories at the board level. This means that we frequently override soc
defaults for evk boards, but it removes the assumption that all imx rt
boards (particularly non-evk boards) will have the same external
memories as evk boards.
The end result is that imx rt evk boards still have the same defaults as
before, but the way we get there is different.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The imx rt dts fixup was missing gpio 2,3,4 instances. This caused a
build error in the gpio driver when an application enabled:
CONFIG_GPIO_MCUX_IGPIO_2=y
CONFIG_GPIO_MCUX_IGPIO_3=y
CONFIG_GPIO_MCUX_IGPIO_4=y
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kwon Tae-young