Add driver and device tree binding for the Low Power Inter-Integrated
Circuit (LPI2C) controllers found in the RV32M1 RI5CY SoC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Apply a similar fix to commit 0289a410ba
to the openisa_rv32m1 linker script for handling .srodata sections.
Otherwise we get oprhan read-only data section. Fix this by adding
the .srodata section to the RISC-V linker script.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The INTMUX_LABEL define generated by DTS is marked as deprecated us
DT_OPENISA_RV32M1_INTMUX_INTMUX_LABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implements sys_arch_reboot() on the openisa_rv32m1 soc to enable zephyr
micropython on the rv32m1_vega board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The 0.10 version of the Zephyr toolchain supports building on the
openisa_rv32m1 SoC. So if the ZEPHYR_TOOLCHAIN_VARIANT is 'zephyr'
than select RISCV_GENERIC_TOOLCHAIN.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a level 2 interrupt controller for the RV32M1 SoC. This uses the
INTMUX peripheral.
As a first customer, convert the timer driver over to using this,
adding nodes for the LPTMR peripherals. This lets users select the
timer instance they want to use, and what intmux channel they want to
route its interrupt to, using DT overlays.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Mike Scott <mike@foundries.io>
Add a Peripheral Clock Controller (PCC) driver. This gates and ungates
clocks to various peripherals on the SoC.
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Marti Bolivar <marti@foundries.io>
The OpenISA RV32M1 SoC has four CPU cores. Two of these are RISC-V
32-bit cores, which are named "RI5CY" and "ZERO-RISCY". (The other two
cores are ARM Cortex-M0+ and -M4.) This patch adds basic SoC
enablement for the RISC-V cores:
- basic dtsi, to be extended as additional drivers are added
- SoC definition in soc/riscv32/openisa_rv32m1 for RI5CY / ZERO-RISCY
- system timer driver for RI5CY, based on LPTMR0 peripheral
The timer driver will be generalized a bit soon once proper
multi-level interrupt support is available.
Emphasis is on supporting the RI5CY core as the more capable of the
two; the ZERO-RISCY SoC definitions are a good starting point, but
additional work setting up a dtsi and initial drivers is needed to
support that core.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Michael Scott <mike@foundries.io>
Henrik Brix Andersen