My boss is asking me to add "all rights reserved" to synopsys banners.
Change-Id: Id74bf3cd0be6bc3159a8b687a37eb11fa3a49f3e
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fixes a bug in _ExcEntSetupDone wherein the return address to the
exception stub was accidentally changed to point to the TCS of the
interrupted thread.
Jira: ZEP-378
Change-Id: I0e502649c49c35ba8b2457016ede4a6b586da3fb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When using the Synopsys DesignWare Synchronous Serial Interface (SSI),
the FIFO depth can vary from 2-256, depending upon how this module is built.
For quark_se_ss, it was using a depth of 8. For EM Starterkit, it will be
32. Adding this now as a configurable option. A larger FIFO really helps
reduce SPI interrupts.
Change-Id: Id2bc8470bfc08ab447d38b89c7904cff010c63bd
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In fault_s.S, changing the word "save" to "safe".
Change-Id: Ia997082a62bf287f09a72b7f0a00d506bd982770
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
We had wrong logic and confusing config options for debugging
Quark SE sensor subsystem. The new option will be used for GDB
debugging. The existing DEBUG option will be used for printing
additional messages on the screen while booting the sensor
sub-system.
Change-Id: Ia54d22e872edafe531ccde271e7504fe9c48a73a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I962ce36b7e2361ea77ae4178bb7c86c19a241c4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I7688ca523915e3fa8a1d28dea7a1d84a66b39d56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some ARC targets can have a data-cache. Although there is no special
instruction to clear exceptions during early init, it is necessary to
invalidate the d-cache BEFORE any data is fetched. The ARC on arduino 101
doesn't have d-cache, and will thus skip this d-cache invalidate.
Also, it is important to set the vector table base register to point to
the interrupt vector table EARLY, so that if an exception is encountered,
the correct vector table is found. Set this base only if it is found to be
different from the one compiled in to the code.
These initialization steps assure that proper exception handling
is in place during early init.
Change-Id: Ie8b5928e5813e104680a6d6510c85d32dc8ed8f3
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The aux register named _ARC_V2_I_CACHE_BUILD can be read
to determine if the ARC has an i-cache. If it does not,
don't attempt to initialize it because this would cause an exception.
Change-Id: I3ff519befcc5ebb7745b58401f12cf3015a9e2e9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The lr and sr instructions cause a pipeline bubble. There is an efficiency
to be gained if pairs of lr or sr instructions are done right next to
each other. This can avoid some stall cycles.
Also, r14 and r15 can be used with isa-16 instructions.
Change-Id: I4165365b49da910db31e0699a1a6e47114962942
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC SOC implementations will need CONFIG_HARVARD so as to
select a different initial stack pointer (one at the top of DCCM memory),
and also to select a different linker command file that uses
ICCM and DCCM. Quark_se_ss will have HARVARD equal to n.
Change-Id: Idb7c4126866c9604e1924200ad5fdd2bc9d28269
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By using isa-16 instructions, a bit of code-size can be saved,
and code can be a little faster.
Change-Id: I0567d8274372748f579610e2bd4236ce52c5d6c8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Now matches kernel/nanokernel/include/nano_internal.h.
Change-Id: I4dbbf50aa05c55de42100a6896fe0fa3b26955ec
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
BSP builds for Nios II generate a linker.h and system.h which reflects
the configuration for that CPU. This can vary depending on how the CPU
is wired up in QSYS, so it needs to be at the SOC level--we essentially
treat any given CPU configuration as a SOC in Zephyr build terms.
Include these files from <arch/cpu.h>.
Change-Id: I12f76600107fec1a14a2f9cb82b0f55915ec03a6
Origin: Altera Quartus tools, machine generated
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ZEP-252 will handle implementation of the code here.
Change-Id: I3e9a6c7cdf2d5a3b0240317b772628fead528095
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At the moment this just jumps into prep_c, with comments left
on other things that need to be done. Having this here ensures that
the early boot code isn't discarded by gc-sections.
vector_table.c removed, it isn't the right approach for this CPU.
Proper method for initializing reset and exception vectors still
being investigated.
Change-Id: Id7965c671f1a55c42ecfb65119497405a646bec4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Avoids confusion with .gitignore rules, which were inadequate to
cover all the places where these files are found. At least in
VIM, these files are now syntax highlighted correctly.
Change-Id: I23810b0ed34129320cc2760e19ed1a610afe039e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Code size can be reduced by replacing ld and st
with ld_s and st_s (if target registers are r0-r3).
Change-Id: Ia70f0aff07fe41a0cfeff2d59dcdadf7c88e1ae8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
code-size optimization to use small-variant loads/stores with %r13w
Change-Id: Ic9b2b7744f7d465bccb1e59f64e621985ae7d04d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
There is a BUG here in that the alias for __start was
aliased to the start of the vector table. Yet, on ARC CPUs,
the vector table CANNOT be the entry point, because there
is no code in a vector table. Only addresses appear in each vector.
Thus, the reset vector, at offset 0 in this table, is a raw address.
The top Makefile in zephyr sets the lable __start to be the entry point
like this: -e __start. Debuggers, for example, use this entry point
to know where the first line of code is.
Also, in KConfig, there were duplicate NSIM blocks. One has been
removed.
Change-Id: I480be7d338a8b45b8ea6ef3f55ac2e6c43829452
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fibers initialize this back pointer to NULL as they are (by definition)
not microkernel tasks. Microkernel tasks initialize it to their
corresponding 'ktask_t'.
However for nanokernel systems, the back pointer is always NULL. This
is because there is only one task in a nanokernel system (the background
task) and it can not pend on a nanokernel object--it must poll.
Change-Id: I9840fecc44224bef63d09d587d703720cf33ad57
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a back pointer to the microkernel task to the TCS when
configured for a microkernel. This is a necessary prerequisite
to support microkernel tasks pending on nanokernel objects.
Change-Id: Ia62f9cf482ca20b008772dad80cbfd6acb6f5b7a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We really should have more faith in the compiler, it generates
code to implement this exactly like the arch-specific assembly
versions, and on ARM is actually 4 bytes shorter.
FUNC_NO_FP used to disable the usual C preamble to update the
frame/stack pointers, which is how the sizes are still the same
or less. It's debatable how useful the occasional use of
FUNC_NO_FP is in practice since it hinders debugging and in a
production build frame pointers should be globally disabled, but
we can address that later.
Change-Id: I6c4b64ab3e3a9b6f91d52fa8c92e6e79a986fc77
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I am working on porting Zephyr to ARC EM Starterkit. This board has ARC
CPUs with ICCM memories. On quark_se_ss ICCM is missing and ignored.
Change-Id: Ic49fc8ef3e6ad879ffc673b8baf34dd467f76c04
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These are for any Nios II at this stage of bring-up.
Change-Id: Ie4d0c80df164f81f6615ac35d3f42235b04870f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
The UART console init should be done after UART init. So it can be
folded into general UART init, thus one fewer SYS_INIT().
Change-Id: Ifb18c5308dfef790325e6bff5bc7b5976fcd421e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The clkInit() is always called so this can be inlined.
This saves 32 bytes of ROM space compared to non-inlined version.
Change-Id: I2cb6d02c0996acad16029be243f6059183938089
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The clock_init() is always called so this can be inlined.
This saves 32 bytes of ROM space compared to non-inlined version.
Change-Id: I1b95142da4c22f4b7fc7f7f6210503d90cf65cc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The arch names and the directories are the same, make it so we
don't have to keep appending stuff to this file as new arches
are defined.
Change-Id: I640526f5cb83fe34f5af14b62e5d06295a4912b0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Chuck Jordan