Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the names of SYS_POWER_DEEP_SLEEP* Kconfig
options in order to match SYS_POWER_LOW_POWER_STATE* naming
scheme.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Removing duplicates in selects for config SOC_NRF52832 and
SOC_NRF52840. Duplicates were unexpected merge artifacts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Each platform is now specifying list of supported power states
as a Kconfig options. Some of the specified states could be
disabled in runtime. As result there is no need for the removed
interface.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Currently each SoC has to define own list of power states.
However all these definitions have to be the same, as common power
management code uses them.
This commit replaces per-soc power state list by global definition.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management code for nRF52 SoC
series after recent changes in Zephyr power management subsystem.
Changes:
- Removed LPS modes, as they are not supported by HW.
(previous implemntation used CONSTLAT and LOWPWR settings
in NRF_POWER to implement low power modes, however these
knobs should be used only when application needs ultra low
CPU wake-up time).
- Reworked code in order to allow adding custom power levels
on the application level and provide better integration
with power management subsystem.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Remove redundant inclusion of nrf.h (included by nrfx.h).
Group the logging/log.h inclusion together with the other
inclusions in this file (make inclusions' list look as in
nrf9160/soc.c).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the locally-defined macros which define the base
addresses for XICR, Peripheral space and PPB. The macros
are not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the wake of 9cbe468a47 we need
to update the nomenclature of DT_FLASH_DEV_NAME macros.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The CIAA and QFAB variants of the nRF52832 were missing in Kconfig,
although present in Device Tree. Add the relevant Kconfig entries in
order to be able to select them.
Fixes#12417
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add configuration values for HAS_HW_NRF_BPROT and HAS_HW_NRF_MPU.
Select these configurations where applicable.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Implementation taken from Nordic nrfx version 1.3.1 soc/nrfx_coredep.h,
modified to remove material from other series and to conform to Zephyr
coding standards.
Note that unlike standard k_busy_wait this is susceptible to
longer-than-intended delays due to the impact of interrupt handling.
Fixes#11626
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Declare and define arm_mpu_config and arm_mpu_regions
structs as const, as they are not modified in run-time.
Fixes#10320
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the WNC-14A2A modem binding was originally introduced, I thought
the base_label would shorten the define keeping the result short and
easily portable. Turns out with the latest changes, it has a side
effect of removing the "DT_*" prefix which is breaking the build.
Let's remove "base_label" from the modem binding and adjust all of
the dts_fixups referring to the WNC14A2A defines.
NOTE: This commit moves the left-over WNC14A2A dts_fixup defines from
the nRF52 soc into samples/net/lwm2m_client as the new values.
They will stay there until the modem can be re-configured as a shield.
Signed-off-by: Michael Scott <mike@foundries.io>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The build script ext/hal/nordic/CMakeLists.txt manages the MDK
dependency. The MDK is not aware of Zephyr and uses it's own defines
to indicate what HW we are building for.
This commit moves these MDK-specific defines out of the 'soc' build
scripts and into the MDK build script where they belong.
This is expected to be a pure refactoring without side-effects.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Simulated NRF boards based on the POSIX ARCH cannot directly
use the current SOC_*NRF options as these pull options from
the ARM CPU and other peripherals.
This commit adds a new set of hidden SOC_COMPATIBLE_* options to
be selected both by the real SOCs and the simulated ones.
In this manner we can have the common code depend on the
SOC_COMPATIBLE* options instead of the current ones where
neccessary.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
(f) arm kconfig
* Add usbd_dc_nrfx shim
The shim is based on the previous one usbd_dc_nrf5.
For handling the USBD hardware, tested nrfx_usbd driver from nRF SDK
was used.
Briefly tested examples:
* usb/cdc_acm
* usb/dfu (USB communication only due to flash handling issues)
* usb/hid-mouse
* bluetooth/hci_usb
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Commit introduces support for ARM TrustZone CryptoCell 310
for Nordic Semiconductor nRF SoCs in device tree.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This commit introduces CPU_HAS_ARM_MPU and CPU_HAS_NXP_MPU options,
which indicate which flavour of MPU is supported by given SoC family.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Piotr Zięcik