The commit adds Kconfig option:
CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT
that enables verification of base address Direct-XIP binary, upon
upload, and rejects binaries that would not be able to start from
available address.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Kconfig allowed selecting any bit in the status register as the QE
bit, and defaulted it to 6. Devices need not require a QE bit at all,
and where JESD216 defines QE bit location the only place in first SR
byte that it can be is bit 6. Further, the code unconditionally wrote
the value 0x40 without respecting configuration of other bits. Some
of those bits control write protection of block-protected areas and
should not be changed.
Remove the Kconfig, instead using the jedec,jesd216-controlled
devicetree property. Allow the driver to recognize whether or not
setting the bit is required, and when it is only use bit 6. Only
update if the setting does not match the configuration.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Add a note in the 2.5 release notes, about TF-M being now
the default Secure Processing Element (SPE) for nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
The commit adds information, to release notes, on mcumgr now supporting
flash devices that have non-0xff erase value.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Added note about change in the option for advertising directed
towards a privacy enabled peer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
deprecate DEVICE_INIT in favor of just using DEVICE_DEFINE directly.
The small handful of DEVICE_INIT users was easily converted to use
DEVICE_DEFINE or SYS_DEVICE_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We deprecate nRF5340 PDK and add a note that
the board will be replaced by nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Mention the newly introduced funtionality for Cortex-M
architecture to force the early-boot initialization of
internal architecture HW state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Deprecate the Musca-A board and SoC support to be removed in 2.6.0.
There are a number of issues with the Musca-A and there exists both the
Musca-B and Musca-S1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
* Add comments about the default settings
* Change proximity-trigger default to match POR of 'disabled'
* Added reference to datasheet
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a new DT macro which was added in
c3eef7744a ("include/devicetree.h: Add
DT_ENUM_IDX_OR macro")
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two shell sections on documentation. Move last section to
right place to fix documentation style.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add some missing information regarding some nRF
SoC and Boards that were added in the current release.
Make a note that HW Stack protection is now enabled
by default in Nordic-maintained nRF Boards.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Per TSC we will document deprecation for 2.4 but not add
__deprecated tags until the 2.5 merge window opens.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Dominik Ermel