At the moment CC2520 configuration options are selected inside "TI
CC2520 Driver RAW channe" submenu like:
[*] TI CC2520 Driver support ----
[ ] TI CC2520 Driver RAW channel --->
Make RAW channel depends on TI CC2520.
Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that dfu-util is a supported flashing method, make it the
default flashing option for Carbon when used via 'make flash'.
Change-Id: I0d2fb9a8cbb4324ea77f1c94ca5df6f1a51e67f6
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
added the riscv-privilege SOC_FAMILY, under which all
riscv SOCs supporting the riscv privilege architecture
specifcation shall reside. These SOCs shall notably have
a common base for handling IRQs.
Moved riscv32-qemu under the riscv-privilege SOC_FAMILY
Change-Id: I5372cb38e3eaed78886f22b212ab4f881ef30b3f
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
This builds the zephyr OS image with the proper flash offsets for
slot 0.
After building, the image needs to be signed using the zep2newt.py
script included in the MCUBoot repo:
./scripts/zep2newt.py --vtoff 0x200 --word-size 4 --sig RSA \
--key root-rsa-2048.pem --bin <path to zephyr.bin> \
--out <path to zephyr.bin>
And then run 'make flash'.
Change-Id: I4739c0b7912c8066882208cb450a8224d433965b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Fix path to pinmux.c
- Fix note markup
- s/TTY-to-USB/TTL-to-USB/ ; s/adaptor/adapter/
- Recommend 3.3V TTL serial cable
- Consistent use of "Flyswatter2" official spelling
- s/UART0/UART1/
- Provide CONFIG_ARC_INIT relevant value
- s/for for/for/
- Consistent naming of JTAG 2x5 male pins as "micro JTAG header"
- s/orange/green/
- The Arduino 101 micro JTAG header connects to the Flyswatter2
via the ARM Micro JTAG Connector
- Consistent case
- $USERNAME is not set on Ubuntu, $LOGNAME is POSIX-compliant
- su requires root password, 'sudo su' only requires user password
- Exit root session when done creating udev rule
- Note: code-block above should be rewritten using 'sudo tee'
- s/X86/x86/
- Fix paths to i586-zephyr-elfiamcu-gdb and arc-zephyr-elf-gdb
- samples/hello_world does not set CONFIG_ARC_INIT=y, so suggest
using tests/booting/stub instead
- s/debugserver/debug server/
- s/BLUETOOTH_DEBUG_STDOUT/BLUETOOTH_DEBUG_LOG/
- s/bottle neck/bottleneck/
Change-Id: I4a76020f67d9672f59eae52f78c5caeb9e513aee
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Explain how to create the udev rules granting access to the
Arduino 101 board in DFU mode.
Explain the available methods to flash the Arduino 101 board:
either manually with dfu-util command line,
or automated with ZEPHYR_FLASH_OVER_DFU=y and 'make flash'.
Provide instructions for x86, ARC and BLE cores, using distinct
code-blocks for the manual and make-assisted methods.
Change-Id: I0f9fe3849dec3c2dc2249b77d31d4f2414c98331
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Let 'make flash' invoke the dfuutil.sh support script, and
export the relevant DFUUTIL_* environment variables, for all
3 cores of the Arduino 101 board: x86, ARC and BLE.
This is backward compatible with the current usage of OpenOCD
over JTAG, since this is only enabled when the environment
variable ZEPHYR_FLASH_OVER_DFU is set to y.
Change-Id: Ic5528cb87a180378d7120d150c27d1e24c9ebe75
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Basic Watchdog driver for Atmel SAM family MCUs. Currently only
disabling the watchdog is supported.
Tested on Atmel SAMV71 Xplained Ultra Evaluation Kit.
Origin: Original
Jira: ZEP-1684
Change-Id: I8f717c7f53aa290c944b7935e0570c2a6f53956e
Signed-off-by: Souvik K Chakravarty <souvik.k.chakravarty@intel.com>
Though the SPI_CS_GPIO Kconfig entry (in drivers/spi/Kconfig) has
"select GPIO" specified, we are observing that merely adding
the symbol(SPI_CS_GPIO) in the
defconfig (boards/x86/arduino_101/Kconfig.defconfig)
is triggering unmet direct dependency warnings
(though the build goes through).
Since the defconfig entry(SPI_CS_GPIO) is not selecting
the aforementioned 'select' rule, we add it manually here.
Jira: ZEP-1668
Change-Id: Ida6a0c851462d747e6559bd0c78fa52e1d0f24b5
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
With the default of 192, the x86 rom will span from
0x40010000 - 0x4004000. However the default starting
ROM address for the ARC side is configured to be
0x40034000. If the x86 image is large enough it will
clobber the ARC code. Shorten the x86 side such that
its last flash address is 0x40033FFF.
Change-Id: I23987c3db11f0e51c2405b8baee114aee39de571
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Provide BUT button and LED1, LED2 leds defines in order to get
basic samples "blinky" and "button" available on olimexino_stm32.
Defines have been named in order to match with board printing.
Aliases are provided to get compatibility with zephyr sample code.
Change-Id: I975dc6c043ea83935fb229cafc737cb3ed80fdc4
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
This reverts commit b3a2fc287b.
The firmware on production board will have a faster Baudrate.
Change-Id: Ifa1abd4c2f882b8ef6e7d9762fc592524177dc48
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The flash memory in arduino 101 pĺatform is connected to the
SPI MST 0 device and the CS is connected to the GPIO 0.
The arduino 101 sensor sub-system core maps the SPI MST 0 device
to the "SPI_2" name and the SPI SS 0 device to the "SPI_0" name.
In the same manner the GPIO 0 is mapped to the "GPIO_2" name and
the GPIO SS 0 is mapped to the "GPIO_0" name.
This commit fixes the SPI device name and the GPIO name used by
the W25QXXDV flash memory.
Jira: ZEP-1672
Change-Id: Ifdd5b664498d0eaa6ad073853b811951fe19ab09
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This includes:
* Moving the Nordic nRF5x Segger J-Link page (temporarily placed inside
one of the board folders)
* Moving the nrf52_pca10040 doc
* Moving the nrf51_pca10028 doc
* Moving the nrf52840_pca10056 doc
Change-Id: I051eb51cee8166ae6472eb696ffeb0625a0424c7
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add basic PHY management sufficient to detect link up, link down and
auto negotiated link speed / duplex. The PHY driver is implemented as
a state machine that executed in the system work queue. The
implementation is non blocking, using the MII interrupt to capture the
completion of read and write events.
This PHY management should be fairly generic. In the future, it may be
beneficial to pull this code out as a standalone PHY driver for use
with other ethernet drivers.
JIRA: ZEP-1674
Change-Id: I3dcb5c14982ef4b40591fcf10d84840b8a2558e5
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This platform is not a real board but let user handle the xtensa
simulator just like a board.
This is needed until a qemu like simulaotr is added to Xtensa.
Change-Id: I54ab28e86eea956cf85af3ee9b4a10f0d531e54d
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
After introduction and activation of STM32Cube LL based driver on
F3 and L4 series, this commit removes the no more needed code for
native driver for these soc.
Change-Id: I266d1a3fc4b464cee34b1cc1a1a333c5bf923e41
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Activate support of LL Cube based Clock control driver
Note that prescaler should now use actual numerical value used
for calculation and not register value (hence 1 instead of 0)
Change-Id: Ia3a26bffbd470c6e958fd2ca82b8eb071beb6ca8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Activate support of LL Cube based Clock control driver
Note that prescaler should now use actual numerical value used
for calculation and not register value (hence 1 instead of 0)
Change-Id: Ic2566d26f1b82441575a94ddd8d632c88df669d9
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Activate support of LL Cube based Clock control driver
Note that prescaler should now use actual numerical value used
for calculation and not register value (hence 1 instead of 0)
Change-Id: I4becae974678970745f918fb05906f36cc4d62a7
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds the base DTS support for the KW41Z Freedom board. The
initial set of changes include SRAM, FLASH, IRQ controller and LPUART
support.
Change-Id: Ic68c4959ddad0c5cfe70d5576a0e58372b93ec9d
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds all the necessary changes to enable use of DTS for
generating required build information.
Change-Id: Ia476fbb14c7d9d6b9db3340c73f599556a880da3
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch ifdef's out information that would be redefined by
information generated from DTS. This patch also fixes up the serial
drives to work properly with the DTS generated information.
Change-Id: I912ccf35be23c107705a4866e5a68b3b51154ffa
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the Hexiwear K64 platform. This
includes enabling the DTS config option and adding conditionals around
the options to be replaced.
In addition, a DTS file is provided that customizes the Kinetis
platform to match the hexiwear board. A fixup file is provided to map
the generated information to the current client driver usage. This
file is temporary.
Change-Id: I247d538c6e13e0d1d4141fee74046575a7d2972e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the FRDM_K64F board. The defconfig
enables the DTS usage and the FRDM K64F specific DTS file provides the
differences from the base Kinetis DTS definitions.
A fixup file is provided to map the generated configuration information
to the driver consumers. The fixup file will be removed once the
drivers are modified to handle the newly generated information.
Change-Id: Ib0ada28faff6a30e8b40eba5c5853e9018ae5fcb
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support and related files for the NXP Kinetis
platform. The DTS files contain the base definitions for the hardware
nodes on Kinetis platforms. The YAML files provide the definitions of
the contents of the DTS nodes.
The Kconfig changes were put in place to allow for the conversion of
existing drivers. Once those drivers are modified, the Kconfig options
that are replaced by the DTS information will be removed.
Change-Id: If110fffa99c0b12471cf2df206da6687277e4756
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the BLE modules on the Panther boards are configured to use
a 115200 baudrate.
Change-Id: I093db68c0fc172757b5878401b99ada7ae0c99d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Panther is a board based on Quark SE C1000 SoC.
Change-Id: I66653c40efcb7e04748a21ea622debee23d7d6c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tomasz Bursztyka