`spi_is_ready` function is being deprecated in favor of
`spi_is_ready_dt` so let's replace the old usage in the tree.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update dac drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Martin Jäger <martin@libre.solar>
Since this DAC is connected via I2C bus the init priority
value must be higher than the default 50 so it can be initialized
later than the bus itself so add a dedicated init config
symbol for that.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Since this DAC is connected via I2C bus the init priority
value must be higher than the default 50 so it can be initialized
later than the bus itself so add a dedicated init config
symbol for that.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Since this DAC is connected via I2C bus the init priority
value must be higher than the default 50 so it can be initialized
later than the bus itself so add a dedicated init config
symbol for that.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Since this DAC is connected via SPI bus the init priority
value must be higher than the default 50 so it can be initialized
later than the bus itself so add a dedicated init config
symbol for that.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Stop relying on <soc.h> to access HAL APIs. Use generic, per-API headers
instead. Note that <soc.h> has been left as is for now, since ARM MPU
relies on a fragile chain of includes/type definitions.
This change should improve compilation efficiency, as we no longer pull
APIs that are not needed. A similar approach is followed by STM32
drivers.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCP4728 is a 12-bit, Quad Digital-to-Analog Converter with EEPROM Memory.
Controlled via I2C interface.
Signed-off-by: Marek Janus <marek.janus@grinn-global.com>
This add support to pinctrl at Atmel sam0 dac driver. It updates all
boards with new pinctrl groups format and drop pinmux entries.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Re-running the script that checks for the const qualifier missing on
struct device ISR's parameter.
The script also changes the parameter 'arg' to 'dev' when relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just use dev->name. This change follow same principles applied when
DEV_CFG and DEV_DATA macros were removed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some drivers explicitely casted data/config from void * to the
corresponding type. However, this is unnecessary and, in many drivers it
has been misused to drop const qualifier (refer to previous commits).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactors all of the DAC drivers to use a shared driver class
initialization priority configuration, CONFIG_DAC_INIT_PRIORITY, to
allow configuring DAC drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The
exceptions are dacx0508, dacx3608, and mcp4725 drivers which have
dependencies on SPI or I2C drivers and must therefore initialize later
than the default device priority.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Add Digital-to-Analog Converter driver (based on DACC module) for Atmel
SAM MCU family. Only SAME70, SAMV71 series devices are supported in
this version.
Tested on Atmel SMART SAM E70 Xplained board.
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DAC53608 and DAC43608 (DACx3608) are lowpower, eight-channel,
voltage-output, 10-bit or 8-bit digital-to-analog converters (DACs)
respectively. They support I2C with a wide power supply range
from 1.8 V to 5.5 V, and a full scale output voltage range of
1.8 V to 5.5 V. The DACx3608 also includes per channel, user
programmable, power down registers.
Signed-off-by: Matija Tudan <mtudan@mobilisis.hr>
Gerson Fernando Budke