Sample walk through:
1. CPU 0 will wake up CPU 1 after initialization
2. CPU 1 will send to CPU 0 an interrupt over MHU0
3. CPU 0 return the same to CPU 1 when received MHU0 interrupt
4. Test done when CPU 1 received MHU0 interrupt
The wake up second core and private core ID are soc specific.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add a sample application that demonstrates how to use the ADXL362 with
data ready and threshold triggers.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
IWDG driver for STM32 doesn't support the callback parameter.
The patch adds necessary workaround for STM32.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Otherwise, it can lead to warning like:
main.c:80:10: warning: format '%d' expects argument of type 'int',
but argument 2 has type 'socklen_t' {aka 'long unsigned int'}
[-Wformat=]
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
After receiving Generic Level Move set/set_unack message, generic
level state should move towards positive or negative extreme end
(which is depend upon sign of delta value) till it not get interruped.
This commit has introduced this feature.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Node Lightness is in downward transition & received Generic
onoff message to set state equal to 1 then Node transaction get
stopped in between. Ideally it should reach to default lightness
value if it is non-zero. This commit has solved this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit upgrade the implementation to reduce complexity in
algorithm. Previously there was different timers for lightness
as well as temperature transitions. But at time only single
transition is remain activated & hence there is no need
of multiple timer for each entiity.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Add a sample application for showcasing the functionality of the
Holtek HT16K33 LED driver with keyscan functionality.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Inside void main(void) result of function sensor_trigger_set() is not
checked which might result that function can't set sensor type
and that error can't be handled.
Coverity-CID: 186196
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
According to the Apple iBeacon spec chapter "2.1 Advertising Packet",
"beacons must use a non connectable undirected Advertising PDU,
ADV_NONCONN_IND". Refer to https://developer.apple.com/ibeacon/
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
main function is not necessary.
And without main here, it is possible to import these
samples zperf files in another project.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
Andrei Emeltchenko