The ArgonKey board has 12 leds controlled by TI LP3943 led
controller. Add the support in the BSP.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Now that it is possible to easily add Kconfig options from command
line, we do not need to always compile native_posix with coverage.
This was done only to have it set easily for sanity_check.
So do not select it anymore, and let users choose if they
want coverage dumps or not.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Since the PCA10040 contains the required DC/DC circuitry, enable it by
default while keeping it configurable. This reduces power consumption
during radio activity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the PCA10040 contains the required DC/DC circuitry, enable it by
default while keeping it configurable. This reduces power consumption
during radio activity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adding new implementation of logging subsystem. New features
includes: support for multiple backends, improving performance
by deferring log processing to the known context, adding
timestamps and logs filtering options (compile time, runtime,
module level, instance level). Console backend added as the
example backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The patch contains basic code support, documentation, dts
file and openocd configuration for STM32F746G discovery board.
This patch related to the issue #6982.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that for any of the removed properties though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Segger provide a firmware makes the ST-LINK on-board compatible with
J-Link OB, allowing users to take advantage of most J-Link features
such as RTT(Real Time Transfer).
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds Bluetooth controller support
for it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit selects HAS_DTS_I2C in bbc_microbit board definition.
It fixes issues similar to issue #8511 for bbc_microbit board
Signed-off-by: Mandar Chandrakant Thorat <mandar.chandrakant.thorat@intel.com>
The commit modifies the I2C-related defines in nrfx
configuration to comply with the updates in (57e3644).
It also modifies the i2c configuration in DTS for board
nrf52810_pca10040 to reflect the nRF52810 capabilities.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the definitions for the LED and Buttons
supported in nrf52810_pca10040 DK in DTS from board.h. Aliases
are kept in board.h to make basic examples pass.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a compile-time directive for the
nrf52810_pca10040 board that instruct nRFx to perform
certain board initialization. The directive is needed
as nrf52810_pca10040 mirrors the nrf52832 DK hardware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds basic support for it in the
arch SoC and dts folders.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannis.glaropoulos@nordicsemi.no>
Since Nordic does not offer an nRF52810 Development Kit and instead
recommends using the nRF52 DK (nRF52832 based), add a board that
enforces the limitations of the nRF52810 but is designed to be flashed
onto the actual nRF52 DK hardware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannisg.glaropoulos@nordicsemi.no>
In order to avoid auto-selection by Kconfig, the board needs to define
the specific IC that it contains, in this case an nRF52832.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the link to SAM3X8E datasheet and
update the minicom command to use sudo as
accessing the serial port requires root permission
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
native_posix relies on the host C library even if users think
they are selecting one of the lib/libc C libraries.
For the math functions to be available at link time we need
to link to the host math library when building for this board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixes#8391
Enables the i2c drivers for these boards.
Required to enable i2c with these boards.
Tested samples/sensor/tmp112 for nrf52_blenano2
with i2c enabled.
Signed-off-by: Mandar Chandrakant Thorat <mandar.chandrakant.thorat@intel.com>
This commit adds support for Microsemi Mi-V RISC-V softcore CPU
running on the M2GL025 IGLOO2 FPGA development board.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
This commit moves code from fe310 platform into RISC-V privilege common
folder. This way the code can be reused by other platforms in future.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
Currently tests/benchmark/footprint build is failing for
nrf52_pca20020 board. In minimal configuration, all modules are
disabled, including GPIO, because of that defines related to GPIO
are missing in board.c file and compilation fails.
To solve it, I selected GPIO to be always turned on for
nrf52_pca20020 board.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
SDA and SCL pins can now be configured through DTS.
Pins on development kits have been assigned according to arduino
headers.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The UDOO Neo Full single board computer configuration supports
the following hardware features on the Cortex M4 Core:
+-----------+------------+-------------------------------------+
| Interface | Controller | Driver/Component |
+===========+============+=====================================+
| NVIC | on-chip | nested vector interrupt controller |
+-----------+------------+-------------------------------------+
| SYSTICK | on-chip | systick |
+-----------+------------+-------------------------------------+
| UART | on-chip | serial port-polling; |
| | | serial port-interrupt |
+-----------+------------+-------------------------------------+
| GPIO | on-chip | general purpose input/output |
+-----------+------------+-------------------------------------+
The default configuration can be found in the defconfig file:
boards/arm/udoo_neo_full_m4/udoo_neo_full_m4_defconfig
Other hardware features are not currently supported by the port.
Connections and IOs:
The UDOO Neo Full board was tested with the following pinmux
controller configuration.
+---------------+-----------------+---------------------------+
| Board Name | SoC Name | Usage |
+===============+=================+===========================+
| J4 RX | UART5_RX_DATA | UART Console |
+---------------+-----------------+---------------------------+
| J4 TX | UART5_TX_DATA | UART Console |
+---------------+-----------------+---------------------------+
The board has been tested with the following samples.
- samples/hello_world
- samples/basic/blinky
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
This commit enables CAN on the STM32L432.
Tested on nucleo l432ck with external transceiver and loopback mode.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
CONFIG_SPI_FLASH_W25QXXDV_MAX_DATA_LEN is a left-over from old SPI API
usage. Now, there is no limit (besides the flash size) in SPI data
transaction.
Fixes#8327
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
These symbols were removed by commit ed26b95 ("drivers/gpio:
Removing dts generated options in QMSI Kconfig"). The settings should
come from DTS now.
Commit 9611002f7a ("boards/x86: Use right GPIO names for CC2520")
fixed some of the references, but there are still others left. Guess
that the same fix is appropriate in those spots (hardcoded
"GPIO_0"/"GPIO_1" names).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added a hidden Kconfig option in arch/arm/soc/nordic_nrf
which is selected by selecting DC/DC circuitry being present
in the board.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the BT_USERCHAN config warning
by setting it only if BT_HCI is selected,
instead of setting it always and relying on it
being set to "no" by not meeting that dependency.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixed the FAKE_ENTROPY_NATIVE_POSIX config warning
by setting it only if the entropy generator is used,
instead of setting it always and relying on it
being set to "no" by not meeting that dependency.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As the nRF52840 supports 802.15.4 natively, we should default y
for IEEE802154_NRF5 if IEEE802154 is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Armando Visconti