There's no point in having a return value for uart_out() if it always
returns the same length that was passed to it. Just make it return
void and remove the error handling code from the caller (which would
never have been run).
Change-Id: I88dab7499a5f526ca65058640021f84e1b3486ca
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The reason why fifo_fill works in qemu but not on real hardware is
that qemu serializes all byte transmission 1 by 1. There is no
real hardware fifo emulated, and "fifo" depth is 1. On real
hardware, the controller owns an internal fifo, with a depth like
8 bytes on Quark x1000. And because of execution flow, how fast is
the controller etc etc... a fifo_fill call might fill in the
internal fifo of 8 bytes and then controller says "I am full"
(which means: "wait for the fifo to have space again"). That's
why poll_out() works: it does the same as fifo_fill and wait
that the internal fifo gets some space again before continuing.
And only when all bytes have been pushed in, it returns.
Change-Id: I452a6ebb2913c5e52ed01d999185e250aa3ed474
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The send() callback of HCI drivers should be returning 0 on success
and a negative value on error. The uart_fifo_fill() function returns
the number of transmitted bytes so it can not be directly mapped to
the send() return value.
Change-Id: I59be478c1985f44a46f2a9613f61471423b0e63a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the static device definition from the driver file,
drivers/bluetooth/uart.c, into the platform config files for
each platform.
This is another step towards converting UART drivers to
the new driver model. Also, platform config files are a more
logical place for the definition.
Change-Id: I668a52de5a38005b8b2bcb67d74437ead377cb16
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All driver Makefiles are adding the same cflags and they
have been done inconsistenly, make all drivers inherit
from the top level Makefile and remove unused includes.
Change-Id: Ie66d0ba7a418ac26f7eb709f50c887dc682e935c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make it clearer that these helpers are intended only for
Bluetooth-subsystem internal code, move them to a separate file.
Change-Id: Iea64780f5c61c1c96e12c9df378676bc49498fe4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BLUETOOTH_DEBUG_UART config option should depend on BLUETOOTH_UART
and also be sorted after it in the hierarchy.
Change-Id: I3e049e52c2e353cd0c6f1a99ca8934a289e0cce8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Buffers returned by bt_uart_evt_recv() and bt_uart_acl_recv() may be
NULL in theory. This makes code consistent by checking return value.
Change-Id: Id39def39c8b1c4c6eefc7b2bf01702c54b3e565c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit organizes the bluetooth Ksymbols in:
- Driver symbols at drivers/bluetooth/Kconfig
- Stack symbols at net/bluetooth/Kconfig
Change-Id: I8ebadeb8ac7f8a769d7620e4e44077a05915dc86
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefile and Kconfig files
to support the bluetooth driver in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I1f72b13aca8fb098eece04c4f0e1b680639b520f
Now that UART drivers are configured internally when it comes to
hardware specific information such as IRQ and registers (or mmaped
registers), bluetooth UART driver no longer needs to do it by itself. It
only requires to select the port it wants to use.
Change-Id: I5a30500f4b6f4155292609d0ed4a758f91930817
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The coding guidelines make an exception to the Linux kernel style
where all branches, even one-liners, should use braces.
Change-Id: I368930af3033eac15f0152a6671909e401d332e6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Configuration option BLUETOOTH_DEBUG_UART enables debug support for
Bluetooth UART driver.
Change-Id: I192f380be492df1a52ad212239447b6ee4b50aac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When the 'len' and 'min' parameters passed to bt_uart_read() are equal
the function is guaranteed to always return 'len' (it will keep
looping until that). This patch removes bt_uart_read() error checks
which would never occur in practice.
Change-Id: Icd879f1e15c6d33acc549155aabd24490098ffc5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some places where it's forgivable if bt_uart_read() wasn't
able to read as many bytes as requested. In other places it's not
acceptable (e.g. when reading ACL or event header). To avoid failing
in situations where we can handle receiving less data than requested
this patch adds a new parameter to bt_uart_read() to specify the
minimum required data amount.
Change-Id: I372e3af7aaa6bfabe14896eb10cc71c3deff94f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we're out of buffers the UART driver would previously loose sync of
where the packet boundaries go, because it was using the buffer itself
to store and parse the HCI packet headers. This patch modifies the
UART driver to use stack variable for initial header parsing, thereby
being able to always determine how many remaining bytes there are and
cleanly discard the bytes until the beginning of the next packet.
Change-Id: I278f3fc0c983e6a2a6904356ef1af1d25c9f06e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we get an invalid packet type here the buf pointer will be NULL.
Going to the cleanup section at the end of the function would trigger
a bt_but_put() call which would cause a NULL pointer access. Directly
returning from the function is the right thing to do instead.
Change-Id: I0c18646e0820cf829ef8aa3f77835ba0a14375b5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We may soon want to have a _wait() variant of bt_buf_get, so to avoid
the number of 'get' function growing too large consolidate the
existing get() and get_reserve() functions into a single one. The new
consolidated function also takes the type as input parameter so that
we know this from the very start and thereby plan for the split into
multiple buffer pools.
Change-Id: Ia09448565349def2be9bc08d9510fedd029480b4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon want to have dedicated pools for outgoing and incoming ACL
data. To know from which pool to get and put the buffers each buffer
should contain enough information to distinguish the two types. This
patch splits the old BT_ACL type into two new BT_ACL_IN & BT_ACL_OUT
types.
Change-Id: I7d3c05c26d2a70f80fb1229e245aa21673ec378b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple HCI UART (H4) driver that currently maps to
the second UART in the system. The main intention is to use this
together with qemu for accessing the Bluetooth controller available on
the host OS side.
The H4 HCI transport protocol is perhaps the simplest of the standard
HCI transports. It consists of a single byte in the beginning of each
packet which indicates the type of the packet: HCI event, HCI command,
ACL data, or SCO data (which we don't use at the moment).
Change-Id: I225a2a2361fbd7cd4ba82ea1f81ddc1271e9e7c2
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg