On OS X (macOS), "make menuconfig" fails with missing
linker symbols. By specifying the "-l" linker options
with the menu, panel and ncurses libraries directly if
the autodetection fails, it builds and links properly.
Note that this might denote a problem with
"check-lxdialog.sh".
Change-Id: Ib2721646cc01c3e977911d8e6d0c8303dcedbc58
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the root Makefile already provides a HOST_OS
environment variable that is exported by using uname,
make use of it in the Kconfig Makefile.
Change-Id: I13655a5295bbcd9f2fdfa8b6309634c1ab143f70
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It allows to silently ignore non-existent files.
When using wildcards in Kconfig source files
(e.g. source folder/*/Kconfig), it is possible to refer files
that does not exist. In the previous example, it is possible
that Kconfig files do not exist in one of the folder's
subfolders and it is not a requirement for the file to exist
in each one of the subfolders.
Additionally, it fixes an issue for wildcards in the file name.
If the name contains a wildcard, Kconfig should iterate
over each file included in the wildcard
(e.g source folder/myKconfig.*)
Jira: ZEP-177
Change-Id: I5aa192ca1e2df83461b12a86fe29a98cd95c4256
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to move SoC and board kconfig defaults
to be parsed later.
Change-Id: If24bdf310dac7034da63f34c0e2add173fe75844
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a debug option to print defaults and their conditions
inside config description under menuconfig/xconfig. This aids in
debugging of kconfig creation.
Change-Id: Ie651435f6b2115dac1bd3a6f7a1b3c2df3c9b0ed
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MinGW have small conventions differences in the
call of some APIs. The following differences are
addressed:
- mkdir method parameters
- printf format for 64 bit integers
- utsname structure
- glob library
MinGW does not provide glob library.
This patch adapts the code to avoid this library when
building for MinGW on windows systems.
The new routines allow windows to support wildcards
(*, ?) on Kconfig paths.
zconf.lex.c_shipped is the file that the build system
compiles by default. If the user defines the
REGENERATE_PARSES environment variable for the build,
then zconf.lex.c_shipped is generated from the file
zconf.l. Both files are provided in the patch
to keep coherency with the REGENERATE_PARSES option.
Change-Id: I5b6ad24ead0521913ab6ea9da93551edcd2dc66b
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Build kconfig with -DKBUILD_NO_NLS by default and disable compiler
warning on Mac OS when building the host tools.
Change-Id: I76a2b5ab6b6b1c0bbe2dc2b31e3bd651fd05948e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building for a certain platform, we have no idea
what architecture we are building for.
We used to specify the architecture alongside the board or platform
name and this was used to find the defconfig in arch/<arch>/configs.
By putting all board configurations we support in one place we do
not have to specify the architecture, just the configuration name.
Change-Id: Ib7e9f63b9a8051714dc207f583fd26ef620497d8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows using wildcards with kconfig files so there is no need
to include individual files within a well define tree structure.
For example, you add
source "drivers/*/Kconfig"
and all Kconfig files under drivers/ will be sourced and the order in
menuconfig will be based on the wildcard processing, not in any particular
order.
The main advantage here is that drivers and platforms become drop-ins, a platform
or a driver can be added by just placing it in the right place without having to
change system Kconfig files or Makefiles (Makefiles will be supported in other change).
Change-Id: Id223ba10e6f48b4c48435e9ea37885162ce55e7c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes *config targets that does not apply to
the system or that are not implemented
Change-Id: Ib7739fda4085562fbe7d14491b7de9f354d0dc7d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Change-Id: I9ea4fd21ac46b42c2b6d87ee7eeeff67768bc375
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Change-Id: I17eea62cc3b85957572f9f9eb5207caa1a91f881
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1. Add `+' to parent make rule.",
is displayed.
$ make -s defconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
$ make -j8 kvmconfig
Using ./.config as base
Merging ./arch/x86/configs/kvm_guest.config
[ snip ]
#
# merged configuration written to ./.config (needs make)
#
make[2]: warning: jobserver unavailable: using -j1. Add `+' to
parent make rule.
scripts/kconfig/conf --oldconfig Kconfig
[ snip ]
#
# configuration written to .config
#
Change-Id: Icda8d75af0bb50612cb020874649593c2ed0154f
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Change-Id: I6891ecfc5003b4494d72878fa0da00a6ab452b21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Change-Id: I8609e00ce99b491dcb1d41e64106a6829dc1fb41
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Change-Id: I4c6b26bf3b19c5d5b19ed43ee6b553f7a5944c21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I5fdbe712db8e15031c8c214c0d4378f8508d03da
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Two or more arguments are always expected. Show usage and exit if
given less.
Change-Id: I1e503495f34eab3f181238a1aa877a4aee3b7e5e
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 5e56c21dfae2e08253820f7fcad1e96be009ca89.
Change-Id: Ie4e0c2afe27937206230e5574c41e5a4a4c3d616
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit ecf5bd8048b683f119e867e85c1693955694b33d.
Change-Id: I51717ad96f312be1f116534f6b79d599bf0e5b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kconfig creates a header file per each Kconfig symbol that changes
in between configuration changes and rebuilds.
This commit creates the files in the output directory specified by the
O environment variable.
Change-Id: I01b3482e9497f70961268505865788385b41ca8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes the issue of kbuild creating empty header files
at the include/config directory.
Linux Kconfig creates a header file for each Kconfig symbol that
changed in between build runs and re-configurations. This feature
is not needed in Zephyr.
Change-Id: I366183cef398b3ab7488456ddbed07f292c5a9bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit allows the tools build to be executed at TIMO_BASE
directory insted of being executed at the PROJECT_BASE.
This allows the sanity checks to run faster because there is no
need to recompile the tools with every test.
Change-Id: I9e9ac78695db884b44e2693029e9ea6ed96b21c8
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Carles Cufi