There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During the conversion of .bin to .o objcopy was not setting the
section to be readonly causing the .rodata in the final image has
write permission.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We don't need the build system to pull out the mmu
region specifiers from the kernel binary when the
script can just as easily do this itself.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Incremental builds have been broken in x86 due to a misconfigured
dependency. mmu_tables.bin is always generated, even for "nothing to
do" builds.
We fix this by removing the stray dependency on user_mmu_tables.bin
when not CONFIG_X86_KPTI.
Steps to reproduce:
Build any sample twice with qemu_x86 and observe that the second build
regenerates mmu_tables.bin.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The same pattern is used five times In the x86 build scripts and the
same code has been copied and modified the same amount of times. This
has resulted in a system that is difficult to make changes to.
To enforce consistency and improve maintainability we refactor the
code into a function.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In general, to have correct dependencies, one must not only depend on
files, but also a wrapper target for the file. This is done for some
of the files in arch/x86/CMakeLists.txt, but not all.
To be consistent with how dependency management is done we add wrapper
targets and add dependencies to them.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The arch/x86/CMakeLists.txt build scripts names five sections that are
generated from .bin files. Two of them are named the same as the .bin
file, and the other three are named inconsistently.
To be consistent, we will rename the three that are named inconistenly
to align with the two that are named as the .bin file.
Being consistent simplifies the system and fosters code-reuse.
This patch renames irq_vectors_alloc_data.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The arch/x86/CMakeLists.txt build scripts names five sections that are
generated from .bin files. Two of them are named the same as the .bin
file, and the other three are named inconsistently.
To be consistent, we will rename the three that are named inconistenly
to align with the two that are named as the .bin file.
Being consistent simplifies the system and fosters code-reuse.
This patch renames gdt.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The arch/x86/CMakeLists.txt build scripts names five sections that are
generated from .bin files. Two of them are named the same as the .bin
file, and the other three are named inconsistently.
To be consistent, we will rename the three that are named inconistenly
to align with the two that are named as the .bin file.
Being consistent simplifies the system and fosters code-reuse.
This patch renames user_mmu_tables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The arch/x86/CMakeLists.txt build scripts names five sections that are
generated from .bin files. Two of them are named the same as the .bin
file, and the other three are named inconsistently.
To be consistent, we will rename the three that are named inconistenly
to align with the two that are named as the .bin file.
Being consistent simplifies the system and fosters code-reuse.
This patch renames mmu_tables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
If kernel page table isolation is enabled, we generate a second
set of page tables. These tables, except for the shared page, have
all non-user pages marked as non-present.
The MMU generation script has been refactored:
- Debugging output has been make significantly simpler and less
verbose
- Useless globals removed or adjusted
- MMU region list is validated as it is read
- Some tuples unpacked into individual variables to make the
code easier to read.
- Useless command line option for output binary endian-ness
remobved
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
LTO is not supported yet, but there are a handful of references to the
flag '-flto' and the non-existent Kconfig option 'LTO'. To not confuse
users about whether LTO is supported or not, we should remove this
dead code.
As an aside, prototyping has shown that supporting LTO will give
signicant (10%) code size improvments, but will not be trivial to
support due to how we process object files with python.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
If dynamic interrupts are enabled, a set of trampoline stubs
are generated which transfer control to a common dynamic
interrupt handler function, which then looks up the proper
handler and parameter and then executes the interrupt.
Based on the prior x86 dynamic interrupt implementation which
was removed from the kernel some time ago, and adapted to
changes in the common interrupt handling code, build system,
and IDT generation tools.
An alternative approach could be to read the currently executing
vector out of the APIC, but this is a much slower operation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
gdb_server was removed in commit 0f669132a0 ("kernel: remove
gdb_server"), but still has a testcase that sets CONFIG_GDB_SERVER=y,
and some code in arch/x86/debug.
Remove the leftover parts. This also gets gets rid of undefined
references to the CONFIG_GDB_SERVER symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Daniel Leung