This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a configuration that does not enable SSE and FLOAT to be used
with Quark systems.
Change-Id: I140d76893292bb9b0cef7c5a06acfd39529fe9ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replaces calls to task_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3a41cd2fd185680d4c1deb2c07ffb82647211fc2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replace calls to nano_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3ed2589489d4de3e79cab085122e95dabafe8915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add configuration files for new platform and adapt options
of the benchmarks for those platforms.
Change-Id: I7c5011966c3a99f0b1c2c3fc44ba05b67ac6f953
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow tests to be built for this platform.
Change-Id: I2275ec71af6cdb6f71c131fa26c5eae2d91c2475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Prevents unnecessary features from bloating the size of the galileo's
minimal footprint benchmark project.
Change-Id: Ie689a2c6fe1409904c43ec9a24a0efc01e768e4c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
exclude Minute-IA platforms from tests that enable CONFIG_FLOAT.
Change-Id: Id186857403cb73d009b6e9e126c4e240f95dbf1a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Cleanup header inclusion and only include zephyr.h in samples
and applications.
Change-Id: If7460f4c6305a1c1cfcfdcf6a9bb7423f410c5c6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the 'gen_idt' tool to generate a mapping of IRQ numbers to
interrupt vector IDs, thereby allowing the IRQ priority to be utilized
when statically connecting an interrupt.
Change-Id: I2e54ceb65145682820dfbd8ca1ee6ec68d71ce1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Andrew Boie