Obsolete, replaced by _set_thread_return_value().
Change-Id: I23e9cfc07e43542f0965817edc3552d456fd2ef3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Previously, UART clock enable was done in pinmux init.
This is now moved into soc initialization, along with other
power related initialization routines.
Change-Id: I1f9464655ad966e9caac2d238006f12a06b202ab
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
To make way for the upcoming blinky and GPIO support for nRF5x-based
boards, this change addresses the hardcoded dependencies in Kconfig
default configurations of the different boards, moving the common option
defaults to the SoC default configuration itself.
Change-Id: I8db0750311ad5a12b76237b39438376f20f6f496
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/basic/blinky
- samples/basic/disco
- samples/basic/button
All 4 GPIO ports are supported.
Change-Id: If8599a23c1d56cfd678a6e2e5339f7e093c6061a
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The new Nordic nRF52840 IC is the latest member of the nRF52 family.
It supports the following features among others:
* Cortex-M4F core at 64MHz
* 1024KB of flash and 256KB of RAM
* Bluetooth 5-ready and 802.15.4 compatible radio
* USB device support
* NFC Tag support
* Quad-SPI
* Hardware accelerated crypto engine
http://www.nordicsemi.com/eng/Products/nRF52840
JIRA: ZEP-1418
Change-Id: I677c787bb33d02695e057d5dced7e3455b9f6c50
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In preparation for the upcoming nRF52840 support, this patch refactors
the nRF52 series support code to allow for future members of the IC
family to be added, while keeping everything that is common together.
JIRA: ZEP-1418
Change-Id: I4200064ca888d72ba0b8629ce94e4ea6384099ad
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove some old cflags referencing directories that do not exist
anymore.
Also replace references to legacy APIs in doxygen documentation of
various functions.
Change-Id: I8fce3d1fe0f4defc44e6eb0ae09a4863e33a39db
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The K64F board has the ENET ethernet driver. Behavior consistently
with other driver selection logic and default the KSDK ethernet driver
on if ETHERNET drivers are enabled.
Change-Id: I2fbed7fdef22d75cf163b61b3e0530ce00d988f0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
And also remove now obsolete ARCH_HAS_TASK_ABORT.
ARC does not need the options either.
Change-Id: Ie52d63178a367ce12b911dacfe2d389f4f75ed2d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- does not pull in printk(), for potential footprint gain
- does not pull in k_thread_abort(), for single-threaded systems
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Ibc6a198b81a6cd73117d1e85aa05b92a4501a34d
Some kernel operations, like scheduler locking can be optmized out,
since coop threads lock the scheduler by their very nature. Also, the
interrupt exit path for all architecture does not have to do any
rescheduling, again by the nature of non-preemptible threads.
Change-Id: I270e926df3ce46e11d77270330f2f4b463971763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The Cortex-M3/4 kernel was reserving priorities 0 and 1 for itself, but
was not registering any exception on priority 0. Only reserve priority 0
and use it for SVC and fault exceptions instead of priority 1.
Change-Id: Iff2405e27fd4bed4e49ab90ec2ae984f2c0a83a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Cortex-M0/M0+ do not have other faults than the hard fault at priority
-1, so they do not need to reserve a priority to allow exceptions to
trigger during handling of ISRs.
Change-Id: I479e439f7bcac70b4b2b787bcd744a4c65437e80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows using it in _EXC_PRIO() instead of hardcoding 2 and 3.
Change-Id: I3549be54602643e06823ba63beb6a6992f39f776
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use it to flag which CPUs can do zero latency interrupts, which depend
on being able to lock up to a specific interrupt priority.
Change-Id: I09f71366ea1d05486e38c513a09abc270884879f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a "memory" clobber to inline asm SVC call to ensure the compiler
does not reorder the instruction relative to other memory accesses.
Issue found by inspect the source code. There is no evidence to
suggest that this bug will manifest for any current ARM target using a
current compiler.
Change-Id: I32b1e5ede02a6dbea02bb8f98729fff1cca1ef2a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Basic interrupt driven driver for the nRF5 onboard temperature sensor.
Change-Id: Id0ac303293b8e8b8285b19bcda31284ee6617105
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Stop using the specific k64 pinmux driver by default and start using the
more generic ksdk pinmux driver instead.
Jira: ZEP-1393
Change-Id: Id65b59518c386e6ba33cfa5c4c5bd541664d2b41
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Following pinmux update for PWM support,
update soc to support this new configuration.
Change-Id: I1126e347ab1ab6b2d830993e548de8f32fa2f8f9
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds the boot time Power Management configuration for Beetle
on Zephyr. In particular it defines the states of the peripherals during
sleep and deep sleep and the allowed wakeup sources.
Jira: ZEP-1300
Change-Id: Iad9c0f851771ea60d94bbe5420b7b3ee0743b77e
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add one pin configuration for I2C1 of the STM32L4 series.
Change-Id: Id05d916f2a1126ca439aebcddd8dc9c91015f6fe
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the pin configuration of the USARTs.
Change-Id: Idf7a18b6eab95c61870ad4850c9eafb1fdcab03d
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the clock driver for the STM32L4 series.
Change-Id: Icdf79061f163d8d00187b382d1564422fb875c5b
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the initial SoC support for the STM32L4XX family. The code was
tested on STM32L476RG, but should work on any STM32L4XX currently
available.
This implementation was inspired by the stm32f1x implementation.
Change-Id: Id6670bce0c423617284e8467a9c461531f948e0f
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There was a misalignment between Zephyr UART device numbering and
SoC UART IP. Device "UART_1" was mapped to IP USART_2, which could
be confusing for user.
This commit allows to align "UART_1" to IP USART_1.
Change is propagated to all STM32F103RB/STM32F401RE based boards and
respective pinmux drivers
Change-Id: Ia8099dfeec7b9c0c686c2a58ccb4dbb1a55b6537
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to new serial driver implementation based on STM32Cube we can
remove the USARTX_ADDR defines as they aren't ended anymore
Change-Id: Ia9f9b0a2a63280c0221c789a53ff7338bda17dfb
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to new serial driver implementation based on STM32Cube we can
remove the USARTX_ADDR defines as they aren't ended anymore
Change-Id: Icd5b7995429025c5b54b1a04ca6abb9649ab31c8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube based implementation allows single driver file for
all stm32 based SoCs.
By maximizing code reuse, use of STM32Cube eases new SoCs
porting into Zephyr and provides better maintanability and
maturity.
Change-Id: Ief4b723add3dfc8b2a839683559c5a4c5d5eb837
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch fixes the unused parameter warning found at the
arch/arm/core/fault.c and arch/arm/soc/st_stm32/stm32f1/soc_gpio.c
files.
Change-Id: I5b3013c1514cff30f4e98feb31169fb28546c534
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Initializing the interrupt stack before initializing (turning off) the
watchdog on the FRDM board pushed the initialization of the watchdog too
late, causing it to fire and reset the board. The board would be kept in
a reboot loop.
Move the initialization of the watchdog earlier: this runs on the main
stack now, instead of the interrupt stack, the same stack the interrupt
stack initalization code runs on.
Change-Id: Ic0006f4f4f4090393571d8355a80dc9390c9fbc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nRF5x series SoCs do not implement systick, hence we disable
CORTEX_M_SYSTICK.
Instead, use nRF SoC Series NRF_RTC1 for system clock interfaces.
The kernel system clock interface is implemented using the low
power real time counter NRF_RTC1. NRF_RTC0 is used by the BLE
controller.
In addition, cleanup nRF5x series defconfig to be consistent.
Jira: ZEP-742
Jira: ZEP-1308
Jira: ZEP-1315
Change-id: I0f6cc1836fe0820a65f2cbb02cf5ae7e9eb92e1d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the systick feature optional that can be selected by the SoC.
Change-Id: I4a405640b84daecc17fc1882743d3cafb78ff861
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An IRQ would always register as a ZIL interrupt.
Change-Id: If82a85f472a60512745652aacc7e8b7dfacaa268
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove NO_METRIC, which is not referenced anywhere anymore.
Change-Id: Ieaedf075af070a13aa3d975fee9b6b332203bfec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The assembler was passed immediate values that are too large for the
limited Cortex-M0 thumb assembly. Load values in registers instead of
using immediate values.
Change-Id: Ib5541c92dea03e0efb1b88ab91eeb408d151a71b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This patch enables REBOOT when RUNTIME_NMI is selected via defconfig
file. This action is required to prevent compilation errors.
Change-Id: I67c18b2860ac34ba8f96e780737b4857a6063ece
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If CORTEX_M_SYSTICK is not selected, do not reference
_timer_int_handler. SoC will need to define a custom system
clock implementation.
Change-Id: I655f3abf66953e434fef69ed16db2d9c2dcc486e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr kernel is unable to compile when CONFIG_RUNTIME_NMI is enabled in
defconfig on ARM's architectures.
This patch addresses the following issues:
* In nmi.c _DefaultHandler() is referencing a function
(_ScbSystemReset()) not defined in Zephyr. This has now been replaced
with sys_arch_reboot.
* nmi.h is included in ASM files and due to the usage of "extern" the
compilation ends with an error. Added the directive _ASMLANGUAGE to
prevent the problem.
Jira: ZEP-1319
Change-Id: I7623ca97523cde04e4c6db40dc332d93ca801928
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Move _thread_base initialization to _init_thread_base(), remove mention
of "nano" in timeouts init and move timeout init to _init_thread_base().
Initialize all base fields via the _init_thread_base in semaphore groups
code.
Change-Id: I05b70b06261f4776bda6d67f358190428d4a954a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the main stack during very early boot so that we can call memset on
the interrupt stack. Initialize the interrupt stack before it is used
for the rest of the pre-kernel initialization.
Change-Id: I6fcc9a08678afdb82e83465cda1c7a2a8c849c9b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ARM Cortex-M early boot was using a custom stack at the end of the
SRAM instead of the interrupt stack. This works as long as no static
data that needs a known initial value occupies that stack space. This
has probably not been an issue because the .noinit section is at the
very end of the image, but it was still wrong to use that region of
memory for that initial stack.
To be able to use the interrupt stack during early boot, the stack has
to be released before an interrupt can happen. Since ARM Cortex-M uses
PendSV as a very low priority exception for context switching, if a
device driver installs and enables an interrupt during the PRE_KERNEL
initialization points, an interrupt could take precedence over PendSV
while the initial dummy thread has not yet been context switched of and
thus released the interrupt stack. To address this, rather than using
_Swap() and thus triggering PendSV, the initialization logic switches to
the main stack and branches to _main() directly instead.
Fixes ZEP-1309
Change-Id: If0b62cc66470b45b601e63826b5b3306e6a25ae9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Artifact from microkernel, for handling multiple pending tasks on
nanokernel objects.
Change-Id: I3c2959ea2b87f568736384e6534ce8e275f1098f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
PA10 should use *_PA10_UART1_RX
Change-Id: Ifba4d301d049db1d62ea3a63d4d66f75c88a71a6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Benjamin Walsh