Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
* Rename BMP280 to BME280 which is a superset for the former.
* Autodetect device based on chip ID.
* Implement humidity fetching and reading for BME280
* Rename sample BMP280 to BME280
Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The application tests polling mode and trigger mode (both data ready and
anymotion triggers).
Origin: Original
Change-Id: Ic0f9400758aaf56ef95f0f3c68c872d1bfd51176
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
gpio_set_callback is meant to be deprecated and thus modifying the
sample to use the new GPIO callback API.
Change-Id: I822cd1c81575834d40926c56cd61b87884230594
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, lower the clock for the SPI bus in order not to hit the DW
controller CS issue.
Change-Id: I69c4211bfa6efb85117185e2ae813dd7c4915a7a
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This app is needed for Arduino101 only, or boards using the Curie
module.
BMI160 interrupt pin is connected to AON GPIO controller. The driver
handling the AON GPIO controller runs on x86 core. Even though, the AON
GPIO controller is accesible to ARC core too, the current implementation
for Designware controller driver does not allow it. Hence, this app will
register a gpio callback and signal the ARC core through IPM.
Other boards that use a gpio pin on the regular GPIO controllers don't
need this app.
Origin: Original
Change-Id: I225ca60735e39c7a47693dc53237f48cd9ac2680
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The movement is needed because on some boards, like Arduino101, the
current GPIO driver implementation does not allow for receiving
interrupts from AON GPIO controller directly on ARC core. Hence, IPM is
needed to relay the interrupts from x86 to arc.
However, other boards that can use a regular GPIO intterupt or users
that connect a BMI160 chip separately, can still use the ARC application
as is.
Change-Id: I58dd77edd45ea2b071db5b99073eb15722847bfe
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
SDK version 0.7.5 has fixed ZEP-62. It is no longer necessary to use
-O0 in order to get correct readings from sensors.
Change-Id: Ia8ac2f55453b7dfdda71fe2f41863cbd0b366739
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This is a temperature and atmospheric pressure chip. The datasheet is
available at:
https://www.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf
Change-Id: I3406eb6c2c4da564757b8315323d0681d648b541
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This illustrates the usage of the sensor API, using either triggers or
periodic reads from the driver.
Origin: Original
Change-Id: Ief7451fc4771b9459a2b3b7ed0a33341a7710cc3
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The MCP9808 supports threshold triggering. Add support for this feature
in the driver and the sample application.
If triggering is activated, the driver can create its own fiber or use
the system-wide sensor fiber.
Origin: Original
Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The app simply reads the temperature from the connected MCP9808 sensor.
It forces -O0 compile flags, as the default (-Os) triggers a compiler
bug when converting temperature readings.
Origin: Original
Change-Id: I0654543e3d361a862bdf78b44fdc1430cb6aad51
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Bogdan Davidoaia