This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove erroneous initialization of 'data' via memset.
Set keep alive interval to 0.
Change-Id: I5da4649985efd39b37bbbdc6ae21a856f9e40b13
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add a MQTT interactive shell that can connect, disconnect, subscribe,
publish, read published messages and ping to the MQTT gateway.
Origin: Original
Jira: ZEP-364
Change-Id: Ie85e7b8b9290cb8e80548886aea74a8427b2323b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set CONFIG_IP_BUF_RX_SIZE and CONFIG_IP_BUF_TX_SIZE to 4.
Modify mqtt_publish_read to retrieve topic name and message as strings.
Change printf for printk.
Change-Id: I6746846cb3359096d87dfbb3134d6a3a95bf087e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Display text strings on parallel interfacing HD44780 based
generic LCD controller using GPIO pins to interface with
Arduino Due(SAM3). HD44780 is a popular controller and an
example can help using gpio pins in parallel with it. I
have tested it on JHD20x4 LCD panel for 4Bits & 8Bits
configuration. The code has been made generic so that user
can modify quite a few options.
Datasheets:
http://lcd-linux.sourceforge.net/pdfdocs/hd44780.pdf
Signed-off-by: Milind Deore <tomdeore@gmail.com>
Change-Id: If2809222466b462fa2f4c42b14a514828530f082
This sample shows how to integrate Paho's MQTT Packet Library to create
a MQTT publisher and subscriber application with Zephyr.
Change-Id: I1cb4124386752eef6187a56ccc9f6fd7fe7175a3
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Provide pcap support for echo-apps with PCAP=<filename> option.
For pcap support:
make server NET_IFACE=qemu PCAP=sample.pcap.
without pcap support:
make server NET_IFACE=qemu
Change-Id: Iad90064e0c32134f9c2fda7b28e2cbca1e4e931c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server should work just fine even if the multicast
context cannot be get. By default there are only two contexts
so the multicast would fail always anyway and the program
would not run properly.
Change-Id: Ia9737cbda4a933a208aae020f055f0b6062b4f47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
I2C_MSG_RESTART is not used in QMSI driver. What is really needed
here is I2C_MSG_STOP; Missing this flag is causing the issue.
JIRA: ZEP-398
Change-Id: I8fbfe15890c886ede4cce3d2cc68f53758a41e75
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Demonstrated sequence of flash API calls to show write and erase
operations with the use of flash_write_protection_set API.
Jira: ZEP-383
Change-Id: I36e5b94519dbdf424dcfbcf7f38e5cf6437da7b8
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
On galileo, UART_0 IRQ is incorrectly mapped to IRQ 0
UART_0 IRQ should be mapped to IRQ 17 (same as UART_1 IRQ)
but NS16550 driver doesn't support mapping same IRQ for
different devices.
This is creating crashes when dumping profiler data on UART
CONSOLE (UART_1) with UART console enabled (UART in interrupt
mode)
This patch is disabling UART_0 in sample apps and adding a note
in the README file
This problem appeared due to following commit:
e643cede3a uart: add ISR callback mechanism for UART drivers
Since that commit, UART driver is setting the ISR for all
UART device instances when interrupt mode is enabled
Change-Id: Ic9d0207e5e5c7e3d8e8a8bf90f3132801bc6c2b1
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
On Quark SE, using system timer as event timestamp creates
inconsistencies since the timer is handled by software in
timer_int_handler and tickless_idle_exit. So timestamp does not
reflect timing of certain events like timer IRQ.
This patch introduces the usage of RTC or AON counter as kernel
event logger timestamp
Change-Id: I070254446dd98dd448e119892c34abf12efca719
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Many test configs are the same, remove complexity and duplication by
using just one kernel config where applicable.
This removes the usage of ARCH which is a remnant from the days where
we had to specify the architecture of the board, the architecture is now
part of Kconfig and determined basded on the board configuration.
This will also make it easy adding new architectures to test cases without
having to add an architecture specific config file when it is actually not
needed, for example now that we will enable micro-kernel support on ARC.
Jira: ZEP-238
Change-Id: I143fa3c4629c58329cfeb0c761c7a896fc1ef63a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patches includes
- a profiler file/Makefile that can be added to an application to enable
kernel event logger flush over UART
- a nanokernel and a microkernel sample application permitting to
exercise the profiler
- scripts permitting to get kernel event profiler data over UART
console and post-process this data
Origin: Original
Change-Id: Icacf4354c526c7f780b11371e9c28c87e6461eb8
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Update the zperf app in order to support ipv6.
Change-Id: I137af07bbd739cf4bfe60bd13bdb06cf939c6c55
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
This patch adds the TCP server capability
to zPerf tool.
Change-Id: I8e4d92b10079a7c4b4bddab8d78655031ca6125c
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
* Rename BMP280 to BME280 which is a superset for the former.
* Autodetect device based on chip ID.
* Implement humidity fetching and reading for BME280
* Rename sample BMP280 to BME280
Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The echo-client can now initiate a TCP connection.
Change-Id: I8223ef377127319dd1791497675a4abe8b382365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the active connection to another TCP host fails, then
quit as it is no point continuing.
Change-Id: I21317d7062d4ac93c342834a2503139fe27076e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-client application opens
a TCP socket and starts to send data to server. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side.
Change-Id: I35306b8ecd6794365086a23bf6a17f5103d7ac80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two helper functions to simplify the use case.
Add comments to clarify the use of the networking API.
Change-Id: I60c58296b77d724b7094b90e153b50dfc0b58135
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the symbolic link.
Update the Makefile.
Rename README as README.rst and restructure its content.
Change-Id: Ic74e91749fc0bbf728e528b49e99a87188f84e6d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is useful to have the shell emit the zephyr version number.
Output looks like this:
Zephyr version 1.3.0
shell>
Change-Id: I2608272564a5d2fe39f263c420a897d845457a98
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The application tests polling mode and trigger mode (both data ready and
anymotion triggers).
Origin: Original
Change-Id: Ic0f9400758aaf56ef95f0f3c68c872d1bfd51176
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Luiz Augusto von Dentz