Add the public API for counter devices and the drivers infrastructure.
Origin: Original
Change-Id: If100fbc9b3d119ce2be6c131bd64dbeb4fe346f2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Integrating it into network stack. Centralizing all in drivers/802.15.4
Change-Id: Ia2916ff652afe5fe736f6560c2ed4a911a5f0679
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the basic skeleton for NBLE, which is the Bluetooth LE API
implementation targeting a custom firmware running on Nordic
Semiconductor nRF51 chips.
Change-Id: I1ce69d6ee0205e71f6bd8d256d9233c93d2cde41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch introduces the infrastructure required to enable QMSI drivers.
QMSI drivers are shim drivers based on drivers provided by QMSI BSP. The
BSP provides a static library (libqmsi) which implements several drivers
for peripherals from Intel MCUs.
Next patch will introduce the first QMSI driver (watchdog driver) which
will rely on the infrastructure introduced by this patch.
Change-Id: Ic7da5d0249af0629eef8c91d124a153f84d4a76e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds the driver to support DesignWare AIO/Comparator
under drivers/aio.
Change-Id: Id6cb1b507c0526098f163f74c188e990590797c2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Implements a low-level IPI driver for Quark SE mailboxes.
Configures the Quark SE platform to initialize it and
configure an IPI console from ARC->LMT on channel 4.
Change-Id: I30123771d04c2e06ea6fcca585fd4ef74c0717a7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quark SE provides various clock controllers through its SCSS block.
Peripheral, external, sensor, and others.
This current drivers provides only the clock gating capability, for
peripheral, external and sensor. But it could support divider and more
other features once defined in the generic API.
Note: such clock has _nothing_ to do with a Real Time Clock (RTC).
An RTC provide clock timing like a watch would do. Here the clock
controller is about circuit clocking.
Change-Id: I1a365ae730dfc6be7686271f7fbb693e64a6ff6f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding DW real time clock support. This driver is used by the Quark SE
and Quark D2000 SoCs.
Change-Id: Iba8ddee1b1b5fee298db95b63418e152774662a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds a driver for a Synopsys DesignWare Ethernet MAC. The
driver uses interrupts to handle received frames, but it uses a
spinloop when transmitting to wait for the transmit descriptor to
become available. Transmission is coordinated by a fiber, so this
should not result in the system execution being blocked. Only a
single descriptor is allocated for each of the transmit and receive
directions to save memory and simplify the code. Another
simplification is that none of the offload capabilities of the
Ethernet device are used. The driver currently only supports a single
instance of the Ethernet MAC, which is consistent with the limitation
in the network stack that only a single network device is supported.
Change-Id: I013b3d439a76e8ff91a775516f7035841b040870
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Initial import of the Grove LCD I2C controller. Data sheet can
be found at:
http://www.seeedstudio.com/wiki/images/0/03/JHD1214Y_YG_1.0.pdf
[DL: Updated command sequence according to datasheet.]
Change-Id: Id1b491f8dce346769dc42c41fac0ea3aabe3950a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This driver allows multiple drivers to share a common interrupt
line. This functionality is required on system that conform to the PC
interrupt structure. In the context of Zephyr this is needed for
SOC's that have their I/O IP blocks behind a PCI interface. Due to the
limited number of interrupt lines provided by the PCI interface
multiple IP blocks may be configured to share an interrupt line.
Drivers that share interrupts must be modified to *not* register their
own interrupt service routine as part of their configuration/initialization
but instead bind to the correct instance of this driver by name, then
register their interrupt service routine with this driver.
Change-Id: I57b517b97ebeabce484ba53c8f940da993cb391d
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This provides the API to manipulte the pin muxing, where
a single pin may provide different functions depending on
settings.
[DL: changed commit message.]
Change-Id: Ifd161137c062dff184024b5aa34737604911d09c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the public APIs for PWM drivers. Also, this adds a Kconfig
and an empty makefile for drivers to extend.
Change-Id: I1cc0c908b6f5aeeb678b6368640d5b9a1cc9751d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
[DL: captilize commit message title; fixed some whitespaces;
changed the __initconfig_gpio_* from level 0 to level 1,
which is the level of pure_init; and added include path
to board.h; ]
Change-Id: I7eea6a6ca9e4b7cf8d1ccabb57f07f786da93ef0
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This driver is a very simple UART driver that can be used to implement
a protocol in application. It has no protocol logic and just allow
application to receive and send data over UART in platform independent
manner.
API is designed to minimize number of required memory copies.
Application is able to provide new buffer every time it decides to
consume received data. It is also able to just alter offset and
reuse current buffer eg if data was corrupted or otherwise invalid.
Change-Id: I8d3827fe2e242196e986d0419bc5487357481558
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This commit standardize the Kconfig inclusion.
Selective sourcing of Kconfig files create conflict when merging
different configuration files (.config files).
Instead, now each kconfig symbols is dependant of its specific
DRV_* driver ksymbol.
Change-Id: I3d20d108a83f00d34067dc334758fd57e51feecf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit organizes the bluetooth Ksymbols in:
- Driver symbols at drivers/bluetooth/Kconfig
- Stack symbols at net/bluetooth/Kconfig
Change-Id: I8ebadeb8ac7f8a769d7620e4e44077a05915dc86
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefile and Kconfig files
to support the bluetooth driver in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I1f72b13aca8fb098eece04c4f0e1b680639b520f
This commit changes the dependency schemme for DRV_RANDOM.
This fix an issue that prevented the merge of this symbol
as a config overlay.
Change-Id: I734a5814af90b9c57355b78cc43f96f05c1afa96
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
Baohong Liu