Add script signing and flashing up_squared_adsp board. Can be used:
$ west flash \
<zephyr>/boards/xtensa/up_squared_adsp/tools/up_squared_adsp_flash.sh
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds multi-processing support for Intel Apollo Lake ADSP.
Some of the start-up code is borrowed from ESP32.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DSP wall clock timer is a timer driven directly by
external oscillator and is external to the CPU core(s).
It provides a common and synchronized counter for all
CPU cores (which is useful for SMP), instead of
indepedently running local core timer (xtensa_timer).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The sole purpose of init options has been to enable hardware flow
control on NS16750 when asked. Use the proper DTS tags for this.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Fix up the board definition so that the actual board can at least be
processed by Kconfig.
See #22474.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the bootloader code, there is a mis-used logical operator
which should be bitwise operator. So fix it.
Fixes#22651
Coverity-CID: 208198
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 9987c2e2f9 spills SoC configs
into architecture files which is less desirable. This provides
the jump address for bootloader, and modifies the bootloader to
jump to __start defined in reset-vector.S. This prepares for
that commit to be reverted.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both memctl_default.S and memerror-vector.S (inside
arch/xtensa/core/startup) refer to XCHAL_CACHE_MEMCTL_DEFAULT which
is not defined anywhere. The linker script for intel_apl_adsp SoC
provides default values, but not the bootloader linker script. So
provide the same default value in the bootloader linker script as
in the SoC linker script.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove unneeded tag bluetooth. Those tests and samples use (should use)
depends_on: ble or whitelist platforms.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix warnings of the following form:
unit-address and first reg (0x30000) don't match for partition@10000
unit-address and first reg (0x200000) don't match for partition@1F0000
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds scripts which downloads the firmware and extracts the
trace messages. The scripts required the SOF diagnostics driver
installed.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Add a command-line frontend to match the logging backend for Intel
Apollolake-based boards like the Audio DSP in the Up Squared.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Create a board definition for the Audio DSP found on the Up Squared
board.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert to the new GPIO API using logical access, including setting the
GPIO line as active low in the Device Tree source.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Updates gpio driver and device tree files to the new GPIO Config flags
- Implements the new port_* APIs
- Update I2C and PWM Drivers to use new GPIO config
- Add esp32.overlay to gpio_basic_api test
- refactor convert_int_type, regs struct
- remove config_polarity
- add kConfig notes
Tests:
- samples/basic/blinky
- samples/basic/button
- tests/drivers/gpio/gpio_basic_api
- tests/drivers/gpio/gpio_api_1pin
Board:
- esp32 DevKitC V4
Note about interrupts:
The ESP32 requires specifying a CPU interrupt to be used for GPIO
interrupt signals. CPU interrupts can be either level or edge (or
special) triggered, but not both.
Please check gpio/Kconfig.esp32 for more info.
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
There is no such thing as CAVS DMA IP block, the DMA IP block found on
CAVS based chips is made with DesignWare one.
This will help to centralize DW based DMA device into one driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by other symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 7e96ca5d80 ("i2c: Remove non DTS Kconfig params").
intel_s1000_crb probably isn't getting tested in CI, because Kconfiglib
generated a warning for the symbol no longer being given a type, which
would be turned into an error.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 0829ddfe9a ("kbuild: Removed KBuild").
This symbol is the only thing in boards/xtensa/xt-sim/Kconfig,
which gets included via
osource "$(BOARD_DIR)/Kconfig"
in boards/Kconfig, so just remove the entire file.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Andrei Emeltchenko