It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a config file for boards using the Nordic Semiconductor nRF5x
ICs with reasonable defaults in terms of UART configuration and
controller settings.
Change-Id: Iaa5904c96c0f40a2749b7dda0398dd35fa809f24
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include zephyr.h instead which properly includes nano or unified kernel
headers.
Change-Id: I41c848092d022e2b0737ae6b2b53084eaf9bc6a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to the fact that ISRs run at priority 1, the LE_Rand
command was not being rescheduled after CPU sleep to be
able to fill its buffers. By performing all TX (to controller)
work on a fiber, the RNG ISR is able to run and the command
can be executed synchronously in the fiber context.
Change-Id: I3b658e1cab3f80ae655cc88566639a122a361a08
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add short descriptions for what the hci-usb and hci-uart applications.
Change-Id: Ie06cfa1678243e97b49e5594a00086cbf3c343be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a sample which implement Eddystone Configuration Service
following the spefication bellow:
https://github.com/google/eddystone/tree/master/configuration-service
Change-Id: Ia3e74d068de03ae20191534e61b2752dd2d70211
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add short description of each sample app to the README.
Change-Id: I830e48aad226b5bf08985fbb6c218e3b5fe72b15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Johan Hedberg