We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_USB* to just USB*.
Also fixup how USB_MAXIMUM_SPEED was defined. We should only define it
if the property exists.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We also remove
defines in dts_fixup.h as they are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from using dts_fixup.h based macros to DT_INST macro. This
lets us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in atmel sam0 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in STM32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new Atmel DFP USBHS component headers provide mode-specific
interrupt register field definitions that replace the generic
definitions (e.g. `USBHS_DEVEPTISR_RXSTPI` for a control endpoint is
now `USBHS_DEVEPTISR_CTRL_RXSTPI`).
This commit updates the Zephyr SAM USBHS driver to use the new
mode-specific interrupt register field definitions.
In addition, it maps the generic definitions to the mode-specific
definitions, as the revision A variant headers (e.g. same70a) in the
latest DFPs, at the time of writing, still provide only the generic
definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert usb_stm32 driver to use of DT_INST macros.
Since driver is compatible with 3 different dt compatibles and
compatible string is included in DT_INST macros, I've kept the
DT_USB_ compatible agnostic macros based on DT_INST ones, which
allowed to remove fixup definitions.
Use of DT_USB symbols is now limited to usb_dc_stm32.
Additionally, compatible "st,stm32-otgfs" is removed from list
of compatibles for usbotg_hs ips.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Previously, endpoint configuration would reserve memory in the packet
memory area which would never be reclaimed. After this patch, endpoints
will reuse previously allocated memory when possible. We still leak
memory when reconfiguration increases the max packet size for a given
endpoint number, but this fixes the common case.
Bug: https://github.com/zephyrproject-rtos/zephyr/issues/23178
Signed-off-by: Josh Gao <josh@jmgao.dev>
Rework USB_DeviceNotificationTrigger(). Fix style.
Drop messages from USB_DeviceEhciCancel().
MCUX EHCI driver notifies about canceled transfers,
but there is no specific code for this event in
usb_device_callback_message_struct_t, the only way to
recognize it is to check the length value.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Data toggle should be reset after SetConfiguration or
SetInterface request.
Always reset data toggle in usb_dc_ep_enable.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
USB Host expects dtoggle to be cleared after ClearFeature(Halt):
"[...] clearing the Halt feature via a ClearFeature(ENDPOINT_HALT)
request results in the endpoint no longer returning a STALL.
For endpoints using data toggle, regardless of whether an endpoint
has the Halt feature set, a ClearFeature(ENDPOINT_HALT) request always
results in the data toggle being reinitialized to DATA0."
- Subsection 9.4.5 of usb 2.0 spec (usb_20.pdf)
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
On stm32f302/3 series, USB and CAN_1 share same IRQ lines.
To use USB and CAN_1 together, USB IRQ could be remap to other
line numbers, on which there is no conflict.
Remap the USB IRQ lines by default:
-Assign remap number in matching dtsi files
-Perform remap before usb driver init
Additionally, fix compilation issue in usb driver.
Fixes#22343
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
setting/resetting endpoints is required when switching to alternate
interfaces. This is a common operation for usb audio class.
When audio device is enumerated host invokes set_interface request
to alternate with 0 endpoints associated. That operation lead to
disable never enabled endpoints. With previous solution error message
will appear.
This commit limits error messages to be present only if endpoint
was configured/enabled before and there was a problem when trying
to configure/enable it for the first time.
* Kinetis driver was updated with return error value when ep was
already configured/enabled.
* nxp driver updated with return error value when ep was already
enabled
* sam0 driver updated with return codes instead of magic numbers.
This is fix patch to #21741
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Lots of style mess in this driver:
- 80 chars limit not followed
- variable allocation and if condition on it should be coalesced
- etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Following update of STM32Cube packages for series F0/L0/F3,
a new file ll_usb.h is now available for these series.
As a consequence, specific hanlding is no more requested for this
series is stm32 usb_device driver.
Fixes#21962
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.
Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Newer SoCs like SAME54 provide dedicated registers to store
the USB trim configuration.
Use those registers if they are defined in ASF to access the
calibration data.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
On newer sam0 SoCs peripherals are enabled through the MCLK
instead of the PM register.
Use the MCLK register if it's availiable.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Newer SoCs like SAME54 have multiple IRQs for the USB peripheral.
Automatically enable all IRQs configured in the DTS.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Previously, if a control transfer had data, it would be unhandled and
left in the usbip socket to be interpreted as the next usbip packet,
leading to explosions.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Kumar Gala