This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Interrupt handler needs to finish all the handler work before
returning to the sync call.
Before this fix, a call to the API read() method could unexpectedly
fail because a second read() call could start before the previous
read() call had not completely finished.
Change-Id: I74249a52b403e2a589d970fae05b9325b20fbe38
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Per Curie documentation, the first sample from the Quark SE ADC
hardware after reset needs to be dropped.
This commits changes the location and the trigger event to do
a dummy read that drops the first sample.
Originally the driver did the dummy read on the API call enable()
and it was triggered if the ADC had awakened from suspend mode.
Because the SoC is not in suspend mode on power on and the API
enable() call has no information on the channels to be read the
dummy read could be missed.
Now the dummy read is done on the API call to read()
and triggered if it is the first time read() is called
since power on.
Change-Id: I1e1ad5f7f44d71ca88572ae242ad629471a9ab9b
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to DEVICE_NAME_GET and DEVICE_GET to fit in the 'device'
namespace.
Change-Id: I407a7f284ed4d1c071961b46615eea859c2e825f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to device_sync_ to fit in the device_ namespace.
Change-Id: I1088dda958584ed90b97137298050fee44c20ee4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This commit changes the behavior of the driver when it reports
buffer results back through the callback.
Originally, the driver reported a callback after each sequence
table round signaled by an interrupt. If in repetitive mode,
each reported result was put in the next buffer element,
which was considered circular, and reported back with callback.
Now the behavior changes. If in repetitive mode, each sequence table
round reported by an interruption puts the data in next element of
the reception buffer. The callback reports back once the buffer is
fulled and stops the sampling process.
Change-Id: I3707574cfaf5dfc874473f38c5dfa88dd392133d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
On Curie SoC the ADC must always be configured in single ended mode.
Change-Id: Ie59b4180358153865c961b66f98321db60d4269f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
After exiting a deep power down mode a dummy conversion is required.
Change-Id: I98dad19e168984efe7af6ad360d0cc46e6603736
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Curie specs states that the ADC_PWR_MODE_STS bit in the
IO_CREG_SLV0_OBSR register must be polled to check if
the requested power mode equals the current power mode.
The bit is set to 1 when requested and current modes match
and the bit is located as the bit 0.
Change-Id: I030d7693d36fb96f09a9cbdd404118674fcb089a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ADC DW IP requires a calibration process each time the
IP recovers from a deep power down mode.
Change-Id: I2e02d1987af9addd9cb08a4e4e8d3848ad5b623c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ADC allows to program repetitives sampling after a read request.
User should be able to provide buffers for each table entry that can
hold subsequente repetitive samples.
Change-Id: I75da4a480a0e3f241d9276cf4fe3999a9cfbba2c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Buffer management on dw driver was too complex.
New buffer management follows the following behavior.
- Each sequence entry have one sample at a time.
- Each sequence entry have a buffer to store that sample.
- If ADC have repetitive sampling configuration, the buffer value
is overwritten with the new value.
New buffer management allow us to remove Synposys'
files and license headers as well.
Change-Id: I75bbbee59bea400839bb34ca1fcb2111073f99d0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adapts IRQ macro calls for the new IRQ static support convention
on ARC.
The new IRQ_CONNECT macro requires to receive the irq numbers without
parenthesis around. This is needed to execute preprocesor substitution
correctly.
Change-Id: I318cb7916b6c3ff3a92b4d2e5a13379f8eed0b4e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the Synopsys source code for the arc ADC driver.
Change-Id: I140a63505685cda8ec9d3174b7cf4fc1e2e91b06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Andre Guedes