* Fix coding style so line length does not exceed 80 chars.
* Remove unnecessary casts
* Remove unnecessary variable prefixes (from *_fiber_stack to
fiber_stack)
* Rewrite lsm9ds0_gyro_channel_get into more readable form
Change-Id: I086562644f707d9d6538cb34d000012464b02fe3
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Use I2C register access API in drivers of sensors that have
8-bit registers.
Change-Id: I33e016feff09be396eae70fb312de055c49caca7
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
The regression was introduced by the following commit:
sensor: bmi160: Use the new GPIO callback API
The problem was that ipm context was not set when registering the
callback.
Change-Id: Icbe8fb9670b9e7e7d489e70adf93ff62fed98935
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
gpio_set_callback() is meant to be deprecated and thus modifying the
driver to use the new GPIO callback API.
Taking the opportunity to use ipm API properly in order to remove the
struct bmi160_data singleton.
Change-Id: Iafcf3fed10bd286962829a4157effd054dd78c1e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adapting GPIO based sensors to use the new callback format.
Change-Id: Ibdc68bf80a2ee42dcaf25c7a6e4431f9b64dc20a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for anymotion and data ready triggers. Also, the user can
choose at configuration time the source of the triggers. For quark, in
particular, since the current driver for ARC does not allow receiving
interrupts from AON GPIO controller, IPM is used: a helper app on x86,
registers a gpio callback and will 'relay' the interrupt, through IPM,
to arc core.
Origin: Original
Change-Id: I170d723425c6280f9aa8c240b66275647723edd9
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
These will be needed by the trigger implementation.
Change-Id: Ib408ae540571447059301046a3486cedffa735d5
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
A mask was not applied on the shifted value, hence allowing one to pass
a val that would change other fields in the register.
Change-Id: I3c7bdb24c7b3a0ce94f664dbba303db35660ce7b
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
These will be used in the trigger implementation, which is a different
file, and will allow for the arrays to be static.
Change-Id: Ia34ebe9bde7d09abe8e93f3ace9e282cee1169db
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The macro will be used in the upcoming trigger file.
Change-Id: I57a570fde37f31771b3d8bb9c028520fdc41da8f
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Add support for BMC150 accelerometer which differs from BMA280 only in
id, I2C address and acceleration data width.
Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
The values from the accel data sample msb and lsb registers need to
be concatenated (using bitwise or) and not added, since together they
represent a single 14-bit value.
Change-Id: I476f05512beb3d6b81bacefd4c52e4b2a541708b
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Compute acceleration data and threshold scales based on data width and
acceleration measurement range instead of defining LSB values for each
measurement range.
Change-Id: I2a15877cef00d49d7a64fd6f6003722bb9f80b92
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add driver for the TMP007 intrared thermopile sensor which measures
the temperature of an object without direct contact.
Datasheet:
http://www.ti.com/lit/ds/symlink/tmp007.pdf
Origin: Original
Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Slope threshold attribute values should be received in m/s^2 instead
of Gs, since accel channels return data in m/s^2.
Change-Id: I0669345ff8af8559e47895bca8225e15d2576a06
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Use the SENSOR_G constant from sensor.h in all accelerometer
drivers, instead of having the constant redefined in each
driver header file.
Since GRAVITY_CONST was measured in mili-m/s^2 and SENSOR_G
is measured in micro-m/s^2, some changes to the calculation
of the acceleration data were added.
Change-Id: Ia323dfc46bee00035e24b37e1b7fbc886dfbe029
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
SENSOR_ATTR_FULL_SCALE attribute now expects the value as radians per
second.
Change-Id: I8082a1f112f1ed8efb511de39e3a8e5ae3d3ed0c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Fix coding style so line length does not exceed 80 chars.
Change-Id: Iddebdf55593736cfa288a03a750cc927665f9065
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
The comments in the sensor header specify that pressure should be
expressed in kPa, but the bmp280 driver returns a value in Pa.
Change-Id: I6d5346db250d1a01a1e5e31fb1d8685ab5dc405b
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This is a temperature and atmospheric pressure chip. The datasheet is
available at:
https://www.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf
Change-Id: I3406eb6c2c4da564757b8315323d0681d648b541
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add device driver for the gyroscope part of LSM9DS0 gyroscope.
Datasheet:
https://www.adafruit.com/datasheets/LSM9DS0.pdf
Change-Id: I25e0c8470c9b68c594bc4a0d2a9a13f8f41ee309
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add driver for the HDC1008 temperature and relative humidity
sensor.
Datasheet:
http://www.ti.com/lit/ds/symlink/hdc1008.pdf
Origin: Original
Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add device driver for the BMA280 I2C-based triaxial accelerometer
sensor, which supports reading data from the accel-x, accel-y, accel-z
and temperature channels. The driver also has support for data-ready
and any-motion triggers.
Datasheet:
http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf
Origin: Original
Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Move driver specific config options to separate Kconfig sub-files
as this is a more scalable approach when considering that multiple
sensor drivers will be added in the future.
Change-Id: Ia1d62afd628723be33868d6c1a956ca7b27eba88
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Support for data-ready and near/far triggers is included. Datasheet the
sensor available at <http://www.semtech.com/images/datasheet/sx9500_ag.pdf>.
Origin: Original
Change-Id: Idd491a8bad7e119b0ed66e655955228ffdac6e76
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The MCP9808 supports threshold triggering. Add support for this feature
in the driver and the sample application.
If triggering is activated, the driver can create its own fiber or use
the system-wide sensor fiber.
Origin: Original
Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The driver only supports simple temperature readings. It does not
support the alarm feature. Datasheet available at
<http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf>.
Origin: Original
Change-Id: I283e6697fc6947975323d280f5ff0ba625fac5a9
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Murtaza Alexandru