Added I2C bus (TWIHS) driver for Atmel SAM MCU family. Only
I2C Master Mode with 7 bit addressing is currently supported.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1866
Change-Id: Ic5aa7b6b21295feccae883d580b38bbeaf2ce291
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Basic interrupt driven i2c driver for the NRf5 series.
The NRf5 series hardware imposes a constraint that various peripherals
cannot be used simultaneously. This driver does not implement mutual
exclusion against SPI, or SPIs drivers (yet).
Change-Id: I308d93bc486eef95db7b95c6b7c9beafc0d7e97f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Add the I2C for the STM32Lx series
Change-Id: Id1694aeb3606b4fa9772bfb7a9f60e48a7cc93a8
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Add a shim layer around the ksdk I2C driver to adapt it to the Zephyr
I2C interface. Currently only supports master mode.
Jira: ZEP-717
Change-Id: I704b8c38e22e456bb9fa4325682b2a354a27a7ba
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add I2C QMSI shim driver for sensor system based on QMSI 1.1
Origin: Original
Change-Id: I9c8efe49e8e9b7a5f8496fa49beb68e409148be7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the driver to utilize the I2C/TWI interface on Atmel SAM3
family processors for I2C communication.
Note that this currently only supports master mode. Limited
testing has been done using the Fujitsu FRAM sample app.
Change-Id: Ibdb8277e47dd9450b49a66a95421eb1ffb1c4eb4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch introduces the QMSI I2C driver which is simply a shim driver
based on I2C driver provided by QMSI BSP.
This initial version supports only I2C_0 controller in 'master' mode.
Due to some issues with qm_i2c_master_irq_transfer API, the driver uses
the polling APIs from QMSI. This means that the current thread doesn't
sleep (i.e. is not scheduled out) while the I2C transfer is carried out.
The qm_i2c_master_irq_transfer() issue is under investigation.
Below follows the missing features which will be addressed by a new
version of this patch or by upcoming patches.
* Block the current thread until the I2C operation has actually
completed.
* Add support for multiple controllers.
* Add support for slave mode.
* Add support for suspend() and resume() APIs.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_I2C=y
CONFIG_I2C_QMSI=y
Finally, due to the lack of proper support for Quark SE in QMSI 1.0.0,
this driver requires QMSI version greater than 1.0.0.
This driver has been tested only with Quark SE based boards.
Change-Id: I369992c7b5fe37f7e0b45be7f19e667ad1fca9ac
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds the I2C driver for the Sensor Subsystem on Quark SE.
This provides minimal support for the I2C controller, and does
only synchronous transfer at the moment.
Change-Id: I400b8ff3390d4b641bed5b8c617830c4217de3ff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Naming convention uses the _ not - in the file names. In a recent
commit for I2C this for some reason changed. Making the names now
more consistent with other files.
Change-Id: I1e363c0c09ae0c8b2ac3def3beeaaeafcc01eb74
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Piotr Mienkowski