If we are a Friend node with multiple LPNs, we need to iterate through
all available Friendship credentials to find the right keys.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Mesh spec expects us to fall back to master credentials if
friendship ones are not available. Also remove an unnecessary branch
with the help of a new 'idx' variable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The friend_cred and new_key information is common for all segments of
a segmented transaction, so it makes sense to store them as part of
struct seg_tx instead of each buffer's user data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The friend_cred hint needs to be set already at the point of
segmenting, i.e. doing it in bt_mesh_net_send() is too late. Move the
setting to bt_mesh_trans_send() and bt_mesh_ctl_send().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
MESH/NODE/FRND/LPN/BI-02-C requires us to ignore unknown Transport
OpCodes instead of treating them as valid responses to a Friend Poll.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Mesh Specification recommends retrying up to 6 times the Friend
Poll when establishing Friendship as LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We should not have any valid key material in key slot 0 if the KR flag
is set, since then the new key/old key information will be incorrect
when network PDUs get decrypted.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to the Mesh Profile Specification: "The acknowledgment timer
shall be set to a minimum of 150 + 50 * TTL milliseconds".
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Mesh Profile Specification states that replay protection must be
done for all control and access messages. Furthermore, the replay
protection list must be updated with the sequence from the last
segment of a segmented message (the code was only updating based on
SeqZero).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that Friend support is complete we can create a full
implementation of the LPN PollTimeout Get message.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The commit 971da9d0 ("net: pkt: adjust_offset: Simplify and optimize
code") changed the adjust_offset() function but left the error print
intact. This print is now invoked even if there is no error which
looks bad in debug prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even with the privacy feature disabled, the stack has so far defaulted
to using an NRPA for active scanning, in order to protect privacy.
This is mainly because it is not always clear that scanning for other
devices may risk revealing the local identity.
There may however be use cases where such revealing is actively
desired, so introduce a new option for this (which defaults to
disabled).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
conf member represents the configuration state of the device.
Change its type from u8 to bool and clean related functions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
netusb endpoint config is specific to the function (ECM, RNDIS, EEM..).
Move this config to the function interface.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Move class_handler and send_pkt to netusb function interface.
This makes netusb 'function' agnostic.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Today, we support/use only one USB configuration descriptor.
Moreover I assume multi-config support should be managed at
usb core level and not by each class driver.
Let's track one netusb function per netusb instance for now.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The addrlen of accept() and recvfrom() is a value-result argument. It
should be updated to the actual size of the source address after
calling accept() and recvfrom().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Update the firmware update_result accordingly by checking return
value of the firmware data write callback registered by application.
Also, set response code according.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The expire function can call net_context_unref() which tries to
get a semaphore with K_FOREVER. This is not allowed in interrupt
context. To overcome this, run the expire functionality from
system work queue instead.
Fixes#4683
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An edge condition was handled in a special way, even though the main
condition covered it well. More code, more jumps == slower code,
bigger binaries.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code parsing received net pkt to get source or destination
sockaddr repeats multiple times in net_context.c.
Eliminate the duplication by net_pkt_get_src_addr() and
net_pkt_get_dst_addr() which can handle different internet protocol
(i.e. ipv4 or ipv6) and transport protocol (i.e. tcp or udp)
Fixes: #4421
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Rename net_pkt_get_src_addr() to net_pkt_get_addr() and make it able to
handle source or destination address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add support for loading IRKs into the controller as well as the LE
Enhanced Connection Complete HCI event. To simplify things, the old LE
Connection Complete handler translates its event into the new enhanced
one which is then the single place of processing new connection
events.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
MESH/NODE/CFG/HBS/BV-02-C expects it to be possible to do a Set with
the existing src & dst addresses but with a zero period in order to
"cancel" the current subscription. In such a case the addresses should
remain set but the period be set to zero, similar to what would happen
if the period would expire.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat subscription Count, MinHops & MaxHops should only be
reset when enabling heartbeat subscription. Any other actions should
keep it unchanged.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat should only be sent in case the relay state actually
changes. This fixes MESH/NODE/CFG/HBP/BV-03-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
"4.1.2 Log field transformation
In order to compress two-octet values into one-octet fields, the
following logarithmic transformation is used: any two-octet value is
mapped onto a one-octet field value representing the largest integer
n, where 2^(n-1) is less than or equal to the two-octet value."
Log field transformation table:
Log Field Value 2-octet Value
0x01 0x0001
0x02 0x0002 through 0x0003
0x03 0x0004 through 0x0007
0x04 0x0008 through 0x000F
0x05 0x0010 through 0x001F
0x06 0x0020 through 0x003F
0x07 0x0040 through 0x007F
0x08 0x0080 through 0x00FF
0x09 0x0100 through 0x01FF
0x0A 0x0200 through 0x03FF
0x0B 0x0400 through 0x07FF
0x0C 0x0800 through 0x0FFF
0x0D 0x1000 through 0x1FFF
0x0E 0x2000 through 0x3FFF
0x0F 0x4000 through 0x7FFF
0x10 0x8000 through 0xFFFF
"4.2.17.2 Heartbeat Publication Count Log
The Heartbeat Publication Count Log value between 0x01 and 0x11 shall
represent that smallest integer n where 2^(n-1) is greater than or
equal to the Heartbeat Publication Count value. For example, if the
Heartbeat Publication Count value is 0x0579, then the Heartbeat
Publication Count Log value would be 0x0C."
According to this definition 2^(n-1) is an upper bound for n log
value.
Proposed Publication Count Log transformation table:
Pub Count Log Value 2-octet Value
0x01 0x0001
0x02 0x0002
0x03 0x0003 through 0x0004
0x04 0x0005 through 0x0008
0x05 0x0009 through 0x0010
0x06 0x0011 through 0x0020
0x07 0x0021 through 0x0040
0x08 0x0041 through 0x0080
0x09 0x0081 through 0x0100
0x0A 0x0101 through 0x0200
0x0B 0x0201 through 0x0400
0x0C 0x0401 through 0x0800
0x0D 0x0801 through 0x1000
0x0E 0x1001 through 0x2000
0x0F 0x2001 through 0x4000
0x10 0x4001 through 0x8000
0x11 0x8001 through 0x10000
According to Log field transformation table 0x0579 would be
transformed to 0x0B and should be to transformed to 0x0C.
This is required to pass MESH/NODE/CFG/HBP/BV-01-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Section 4.2.18.2 in the Mesh Profile Specification states:
"The Heartbeat Subscription Destination shall be the unassigned address,
the primary unicast address of the node, or a group address, all other
values are Prohibited."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes issue when receiving iv index greater than current
index + 42 in update mode. According to Specification when node is in
update state it should only accept iv index equal to the current iv
index. When node is in normal mode it should ignore index that is
greater than current index + 42.
This allows to pass MESH/NODE/IVU/BI-02-C.
Also this patch cleans up the iv update procedure, to make it easier
to read.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg