Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In stereo case the pdm stream continuosly alternates 1-bit from
the left channel with 1-bit from the right channel. In this case
we need first to demultiplex channels bits on byte basis.
Then the Open_PDM_Filter library has to be called twice, one for
each channel.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These files are 'source'd within an 'if AUDIO_DMIC', in
drivers/audio/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This driver supports ST Microelectronics digital pdm microphones
(MPxxDTyy) connected through different peripherals. Currently only
I2S is supported.
The driver makes use internally of the OpenPDM2PCM library
to convert the PDM audio stream to PCM. Currently the
oversampling factor is fixed to 64.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Driver update to use GPIO driver for the reset control signal.
Driver update to use definitions from DTS including I2C address.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Update Kconfig for tlv320dac audio DAC to include GPIO
as a dependency. The codec driver now uses GPIO driver
to control the RESET for the DAC.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use ARRAY_SIZE helper macro to compute size of array rather
than hardcoding.
Also, remove unnecessary variable to store the size which is
now useless.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a CMakeLists.txt file for audio codec TLV320DAC
Updated drivers/CMakeLists.txt to include audio
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added an entry in drivers/Kconfig for audio
Added an entry in drivers/audio/Kconfig for audio codec
Added an Kconfig file in drivers/audio/ for TLV320DAC
Enabled audio coded in Intel S1000 CRB defconfig
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Anas Nashif