Forced attempt to set the device address is unpredictable
and also should not be done during testing.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
CONFIG_TEST_HW_STACK_PROTECTION is set by default in tests,
and that one selects HW_STACK_PROTECTION option. Therefore,
we do not need to set that one explicitly in the test project
configuration files. We clean up some redundant occurrences of
CONFIG_HW_STACK_PROTECTION=y from the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move can.h to drivers/can.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move zephyr/jwt.h to data/jwt.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move json.h to data/json.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Log records may store either data or pointers to more records. In both
cases they must have the same size. With 64-bit pointers, the amount
of data that can occupy the same space as a pointer has to be adjusted.
And storage alignment has to accommodate actual pointers not u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Log arguments were hardcoded to u32_t values. On 64-bit systems, this
is rather restrictive. To make things clear, arguments now have their
own type, log_arg_t, which now can be adjusted in only one location
if need be. It is currently defined as unsigned long whose effective
width is equivalent to u32_t on 32-bit systems, and u64_t on 64-bit
systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The last FCB test to run (fcb_test_last_of_n) uses uninitialized
test_data[] and leaves behind a flash.bin with random content. Pick
another one (fcb_test_reset) that leaves a deterministic flash.bin
behind and run that last instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added a test case with corner case scenario, in which sector closing
operation is interrupted (e. g. due to power-down).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a test for testing full round GC on 3-sectors
configuration. In this case all kind off sector can
appeared so this test covers well more numerous
sectors configurations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added basic tests for the NVS file system. One of the tests covers power
down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Johann Fischer