Some of the generated documentation depends on the devicetree scripts.
E.g. the bindings index uses edtlib.
We don't have a well-defined interface boundary here for managing
dependencies, so let's just add the entire dts directory to the
'paths' glob list in doc-build.yml. This will ensure we don't
accidentally change some DT implementation detail in a way that breaks
the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The jlink runner performs a version check which is skipped on
Windows. If running inside WSL we also need to skip.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow a custom (remote) gdb host passed as a debug argument
which tries to connect to an existing one instead of creating one.
This also allows to run the gdb server outside of a WSL
in Windows and the debugger inside of the WSL environment.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Also, explicitly check for NULL.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove Linux specific warning which has been causing confusion and
incorrect usage of return codes just to comply with checkpatch.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ID validation check would always fail with IDs less than
OTS_OBJ_ID_START_RANGE, where the intention was that it should
allow the OTS_OBJ_ID_DIR_LIST (0) value as well if
CONFIG_BT_OTS_DIR_LIST_OBJ was enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of defining the string, that will be reported by DFU
as a name for DFU target, in code, pick it from the DTS label that
will be the DFU target.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Alternative settings are determined by number of flash partitions
available for DFU from DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds macro that, using the DTS identifier, allows to
extract flash area label from DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
IPv6 source address selection procedure selected link-local address
for any muticast destination with other scope than mesh-local. It
was a cause of problems for broader multicast scopes like admin-, or
site-local. For such broader scopes source address must be at least
as broad as the scope of multicast destination.
This patch updates IPv6 source address selection procedure. Now
link-local address is selected only for link-local destinations,
including multicast destinations. For broader destination scope,
source address with broader scope is selected.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
The interrupt_util.h provides utils of trigger irq, now move them into
testsuite. All of the needed test cases can make use of them.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Fixed Coverity CID: 219524 : Dereference after null check
For fix this issue added null check before call function pointer
Fixes#32913
Signed-off-by: JuHyun Kim <jkim@invensense.com>
Fix missing big_disconnect in hci_le_big_complete when the number of
BIS in the event is invalid.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Validate the big_handle before received from the controller before
using it as an array into the bigs array.
Discover by coverity: Insecure data handling (TAINTED_SCALAR)
Using tainted variable "big_handle" as an index into an array "bigs".
Cleanup state of BIG in pending or syncing state if it exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parsing BIG handle which is just one octet as a two octet field,
which could have caused problems on big-endian systems.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the BIG initialized atomic handling to use bits instead of a
single atomic.
This allows for more bit flags to be added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Write this in terms of DT_GPIO_CTLR_BY_IDX instead of the lower level
DT_PHANDLE_BY_IDX for clarity and parallelism with things like
DT_SPI_DEV_CS_GPIOS_PIN, which is written using DT_GPIO_PIN_BY_IDX
instead of DT_PHA_BY_IDX.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix race conditional when create connection cancel is called
and actually a connection did get setup while initiator is
being stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile adv_addr which is only used by
controller when supporting initiator/central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initiated bit flag into role specific union, so that
other role specific bit flags can share bit space in the LLL
context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix flash driver sync regression introduced due to changed
default ULL_HIGH in the commit 30634334a8 ("Bluetooth:
controller: Fix ULL_HIGH priority to be lower than LLL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ticker implementation to return lazy value for a
ticker when enumerating active tickers with time
reservations.
This is required to find offsets and to use the lazy value
to correctly calculate event and payload counter values that
needs to be filled into SyncInfo and BigInfo structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Even though possible to use external pull-up and open drain buffer,
prefer internal pull-up to reduce power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Previously, a non null-terminated "string" could
be passed to z_impl_net_addr_pton if the string was
exactly `INET6_ADDRSTRLEN` long.
Signed-off-by: James Harris <james.harris@intel.com>
Add a testcase to test pop data from stack by
mutil-threads, verify data will be poped by
the highest priority thread that has waited longest
firstly.
stack integration
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
The compiler shows the array bounds warning message for some boards
which don't set the PSL function.
Change npcx_pinctrl_psl_input_asserted() input parameter from int to
uint32_t to fix it.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Martí Bolívar