add unified kernel mutext test cases which covere basic
mutex apis under different conditions - timeout,
no_wait, forever
Change-Id: Iaab5bba80a6eebd89bfe675352d67b27024ad7bb
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add stack test cases which cover basic api usage across
threads and thread/isr.
Change-Id: I1f42fa1139899c932a14da18753b93972f561bc8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In unified kernel, memory maps are renamed as memory slabs.
This change ports tests/legacy/kernel/test_map stuff to
use unified APIs.
Change-Id: Ibf4d60fb53e45a119e6828a09f2638ee7def76b7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_critical test case to
the unified kernel, and to use the ztest framework
Change-Id: I10834cbb51446b4a12fc680c0b65438d550f4d85
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_context test case to
the unified kernel
Change-Id: I344ac240eb3b48042477f8875115fdc3fca1154a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The GPIO_INT_LEVEL value is zero so the mask assignement
is never executed. Using the bit complement GPIO_INT_EDGE
the proper mask is assigned
This issue was reported by Coverity
Coverity-CID: 151966
Change-Id: Iacfeb6466388023bd6123ba86280aa9ca15f34e4
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The dev name for spi in the sensor sub-system was changed to
SPI_SS_x from SPI_x recently. Let's use the new name in the
sample app.
Change-Id: I78cdf21fce16290503c303e0de1432b4587486aa
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Instead of including the rtd theme in zephyr use an installed instance,
if nothing is installed, use the default zephyr theme.
Change-Id: Ife4bd878e3f879cf59ecf2bc5d186a531a3bf1b6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit cover Interrupt Reset mode and Reset mode by 2 test cases.
They can't be tested in one shot, but need test separately.
api converage:
wdt_enable()
wdt_disable()
wdt_set_config()
wdt_get_config()
Change-Id: I44b20cfe97d860e8b25b2cab76f9d9398cfd8e69
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the test include 2 ztest cases, verfy below apis:
rtc_enable()
rtc_disable()
rtc_read()
rtc_set_config()
rtc_set_alarm()
rtc_get_pending_int()
Change-Id: Ifca2541312c5ec8d450803f1b6e4f5064098e7fe
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test case is under test set "lifecycle" against
https://www.zephyrproject.org/doc/kernel_v2/threads/lifecycle.html
Change-Id: I0d43c1a1798411c786efc45d76e6fd7c024c47dd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Iaadba1a720130a496a83c245c7da4b95dff168fd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Stops handle data if server responds with SDP Error PDU
Jira: ZEP-1112
Change-Id: Iaddb740f71fa86384753ab32956fc69b89faeea0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds handler responsible for receiving SDP data on SDP client request.
For now simple validation are done on SDP response header data.
Jira: ZEP-1112
Change-Id: Ic6009030db34e26dfdbd57fa1b0a22f6e27b6a11
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
cid is uint16_t and L2CAP_BR_CID_DYN_END is 0xffff so doing
"cid < L2CAP_BR_CID_DYN_END" comparisong is always true resulting
in for loop not being terminated as expected. Check against cid
overflow instead. Code comment is also added for clarity.
Change-Id: I15d6d838ed8b731824e602d089d765614c96c6c1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Resets SDP client session data on related L2CAP transport channel
disconnection state. Leave the channel itself reset to L2CAP layer.
Jira: ZEP-1112
Change-Id: I4d8a8f10908f5e599ba6506470b98508869cb21b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes possible to append user UUID to context to be able later iterate
it on subsequent resolving process.
Jira: ZEP-1112
Change-Id: I193ff1cee199045c9686dc4ca200adf19db377e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Renames and refactors helper get_client_session to sdp_client_get_session
to follow existing naming convention and adds second helper creating
new SDP client session. Then simplifies using them the API implementation.
Jira: ZEP-1112
Change-Id: I6b919f521e6665a7117fa06208b3fa2ae5f77fda
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Peer sends Remote Port Negotiation command to set port
communication settings. Currently we accept all the settings
sent by remote.
If there is only one value byte in the request then current
port settings has to be returned for which we returns the
default settings defined in ETSI.
Note that RPN may be sent even before a dlc is opened.
> ACL Data RX: Handle 256 flags 0x02 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: Remote Port Negotiation Command CMD (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
< ACL Data TX: Handle 256 flags 0x00 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: Remote Port Negotiation Command RSP (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
Change-Id: I73b7d8577e7e2bc3e436f4db86a91e12db440f1f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
rfcomm_make_uih_msg() only needs session to get the role while creating
msg. This is mainly done since some commands like Test and RPN may come
even before dlc is created.
Change-Id: Ifd5a2ceaf17c20db3f00604cd2b4f1759155123e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
l2cap_br_conn_req_reply expects valid bt_l2cap_chan pointer but this
is achieved only on accept() callback. Use l2cap_br_send_conn_rsp
instead for rejecting cases where no channel was accepted. This also
makes success path being 'primary' function path ie erros all always
handled inside if() statements.
Jira: ZEP-1405
Change-Id: I890b4fcf029afce65eba4f2ebae0b1094feb007f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The buf.h header file is a more natural place for these than the
hci_driver.h file.
Change-Id: I1eedcf03ae6ffa374403b382ec665ae554d6847b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds validation check when 'sdp discovery' API is to be called
by client, to reuse existing connection if valid or initiate new one
if posssible to set SDP L2CAP link to remote.
Change-Id: I47ce33cb5e95cf2616f9b23712641b912ce40f37
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Added a Pending Request structure, this will keep
a track of the last sent AVDTP Singnalling Message.
This will be used to verify the response from the remote device
Memory will be allocated by the application.
Change-Id: Ic31df154b52ce9013e5039ab195a9651d1811a7a
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Adds for now stubs of handlers responsible for taking a connected and
disconnected state of SDP L2CAP channel.
Change-Id: I21b76b755168fb63f6cade5f6b0c0bab93d0a01f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds basic functionality to be able to trigger establishing outgoing
L2CAP channel to remote using as PSM SDP channel. The number of such
outgoing connections is limited by configured pool of connections.
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change-Id: Ie5428e5b1b5f5c57f473ee0adfd4621cd9fe6e3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This patch contains API's which is used to parse range of values
eg. (0,3). This patch also parses the string, reads, process and
move the buffer accordingly.
Change-Id: I8dba5b7d630f65b87967c101557c5c7ffd297dd1
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
at_get_number which converts the string into number now operates on
at_client to get the string buffer. This patch also improves API()
skip_whitespace to be operated on at_client. Also the the API's
get_cmd_value, get_response_string are updated to work with buf
increment.
Also in this patch the return type of the function str_has_prefix
is changed from 'int' to 'bool'.
Change-Id: Ia626e0d13212b84413cce0444349975f4abe1cf6
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The execution time of k_sem_give() increased slightly recently, and
since it was being called from the radio ISR this had an impact in the
deadlines not being met.
This change moves the actual call to k_sem_give() to a lower-priority
job and thus out of the ISR to avoid its execution time affecting the
ISR's timing.
Change-id: I76c82df895c6daaffef52786b0c900ee15acb0aa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ECC emulation synthesizes its own HCI events so we may need up to
two available priority buffers at any point in time.
Change-Id: I88b37c7e9e9f64483d80cde9243470a7f0477321
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If an attribute has no special access permissions (e.g. it's
notify-only) it would set the permissions to 0. Having a dedicated
enum value for this makes the code a bit more readable.
Change-Id: I0d3d8716a2544379353148735ba29b1a137f7173
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Merge build system and application primer into one and put
all in one file to make it easier to follow.
Jira: ZEP-686
Change-Id: I64ec7ef7a6aa2ad80496ca0ee3ddc3d7fe09a5d7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
jing wang