Add support for using the stm32 fmc to interact with a display
controller, using Intel 8080 protocol with a 16 bits parallel bus.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Introduce NXP LCDIC driver using MIPI DBI class. This peripheral
supports 8080 and SPI 3/4 wire mode, although only SPI 4 wire support is
currently implemented. The driver supports DMA and interrupt driven
transfers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI controllers can easily implement MIPI DBI mode C, with the help of
GPIO pins for the reset and command/data signals. Introduce a MIPI DBI
compliant SPI driver, which emulates MIPI DBI mode C (SPI 3 and 4 wire).
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Introduce MIPI DBI driver class. MIPI DBI devices encompass several
interface types. All interfaces have a data/command, reset, chip select,
and tearing effect signal
Beyond this, MIPI DBI operates in 3 modes:
Mode A- 16/8 data pins, one clock pin, one read/write pin. Similar to
Motorola type 6800 bus
Mode B- 16/8 data pins, one read/write pin. Similar to Intel 8080 bus
Mode C- 1 data output pin, 1 data input pin, one clock pin.
Implementable using SPI peripheral, or MIPI-DBI specific controller.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Miguel Gazquez