The driver is not specific to 32bit ARM family. For example it is
currently used by the QEMU ARM64 virt machine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Set threads spawned by BinaryHandler dameon, so when the main thread
exits for some unusual reason (e.g SIGINT) the child threads are
automatically killed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Work in topic-gpio to convert drivers to properly use devicetree flag
settings requires that these be defined so sanitycheck can find them.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
FLASH_LOAD_SIZE gets its default from the $(dt_chosen_reg_size)
function, which is defined in scripts/kconfig/kconfigfunctions.py.
$(dt_chosen_reg_size) returns a decimal value rather than a hex value.
Previously, FLASH_LOAD_SIZE was declared as hex, which made Kconfiglib
automatically prepend 0x to its value (the same logic is in the C
Kconfig tools). This gave an incorrect size in .config, e.g.
CONFIG_FLASH_LOAD_SIZE=0x374784 where CONFIG_FLASH_LOAD_SIZE=374784 was
intended.
Fix it by changing the type of FLASH_LOAD_SIZE to int. All other symbols
that use $(dt_node_reg_size) and $(dt_chosen_reg_size) are int too
(FLASH_SIZE and SRAM_SIZE, plus BOOTLOADER_SRAM_SIZE is also int).
This has some subtle breakage potential in that FLASH_LOAD_SIZE has a
prompt (is user-configurable in the menuconfig or by changing .config
files). Nothing seems to directly assign in Zephyr at least.
Fixes: #19877
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Seems to have been unused since commit 06e78de681 ("build: do not use
link-zephyr"), committed in 2015.
Discovered with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit switches from using device tree automatically
generated address-based defines to the instance id-based ones.
Without this change it is not be possible to re-use the driver
on boards where the device is located at different location
than 0xe0002800.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This commit switches from using device tree automatically
generated address-based defines to the instance id-based ones.
Without this change it is not be possible to re-use the driver
on boards where the timer and uart devices are located at different
locations than 0xe0002800 and 0xe0001800 respectively.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This commit switches from using device tree automatically
generated address-based defines to the instance id-based ones.
Without this change it is not be possible to re-use the driver
on boards where the device is located at different location
than 0xe0001800.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unused since commit 08f0d93cbb ("shell: Improve handling of log
messages").
Discovered with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit enables running the test in CI for nRF51-based
platforms, which require special IRQ lines for the IRQs
used in the test. An additional customization is needed
for QEMU_CORTEX_M0, which uses a different system timer
based on TIMER0 peripheral.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables running the test in CI for Cortex-M Baseline
architecture. As STIR register is not present in Baseline cores,
we need a minor modification in the test code so it uses NVIC
intrisics instead of setting the STIR for ARMv6-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to explicitly define the size of the const
array elements for the customized IRQ vector, used in the
test. The compiler should be able to infer the actual size
by counting the provided entries.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Key overwrite feature allows to overwrite old pairing key
records when key storage is full and a new pairing request occurs,
or new keys are distributed. If enabled when key storage is full and
a keys storage slot is requested, the oldest keys added will be
removed. So new devices can be paired with no limitations and no need
to determine, which devices should be unpaired to free key storage
space explicitly in application. To enable the feature set
CONFIG_BT_KEYS_OVERWRITE_OLDEST=y.
Oldest keys are determined by minimum value of up-counting aging
counter. If you set CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING=y
aging counter values will be updated each time the secure connection
is established. This might increase flash wear out if at least two
secure connections are established and shut down periodically. When
the option disabled aging counter is still updated on each new secure
connection, but not stored to flash.
Signed-off-by: Sergiy Nikolayenko <sergiy_nikolayenko@jabil.com>
The function that initializes interrupts configures the sensor
register to enable interrupts. It is called before the function that
resets the sensor. Swap the order.
Also correct the mask argument to the configuration command, and use
the BIT() macro to construct the set argument.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This sensor defaults to no trigger, in which case no observations will
be read from the device. Set to use the work queue (global) trigger.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.02.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/3
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With the changes in PR #19836 applications now need to explicitly
include hci.h to use defines from it. Fix two sample/tests apps which
were missing this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The earlier code was always queuing the FIN that is sent when
connection is closed. This caused long delay (200 ms) before the peer at
the other end noticed that the connection was actually closed.
Now check if there is nothing in the queue, then send the FIN
immediately. If there is some data in the queue, flush it when a valid
ack has been received.
Fixes#19678
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For Genric OnPowerUp equal to 0x02 (Restore):
If a transition was in progress when powered down, the element
restores the target state when powered up. Otherwise the element
restores the state it was in when powered down.
This commit implements above mentioned logic.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The 16-bit format group addresses will be stored,
but we don't store (or restore) the virtual label UUIDs,
i.e. after a power cycle the 16-bit group addresses
would be meaningless.
Fixes#19342
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Add public API function to get the connection handle of the connection.
The connection handle is needed by applications that intend to send
vendor specific commands for a given connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the HCI error codes to its own public API header since these
status codes are given in the connection callbacks (connected and
disconnected). This avoids the conn.h header file to depend on the
entire HCI header file.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the Bluetooth device address definition out of the HCI header file.
This definition is used by higher layer which should not have to include
the HCI specific header file to get the address definition used by the
host API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the GAP defines and the GAP related bluetooth assigned numbers out
from hci to a GAP specific public header file.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Change default flash size and offset to use the new kconfig function
`dt_chosen_reg_addr` instead of deprecated `dt_hex_val`
Signed-off-by: Alex Tsamakos <alex@actinius.com>
This illustrates how a keyboard matrix (laptop keyboard) reports
key events to a user application. In addition, it shows how to
handle the typematic rate and delay from user space.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Pavlo Hamov