PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sanitycheck already sets this and we need to allow deprecation
warnings.
Change-Id: I3d6bf652403bcbdba47663c8cd0d17682a8a842d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This consolidate code around LE signalling header handling which has been
duplicated in many places.
Change-Id: I0c2cd48c155b751e1bbbd26070965d075cdc2cc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a peer controller does not recognize one of the LL control
PDUs received, it will issue an LL_UNKNOWN_RSP PDU to let the
peer know that it does not recognize the request.
The controller now handles this incoming PDU and completes the
procedure by issuing the appropriate HCI event in the case of
an LL_FEATURE_REQ and _RSP pair.
Jira: ZEP-1220
Change-Id: I7c04a346441f04deee41198daa6309c11ae1b571
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This suppresses warnings for platforms where SERIAL can't be provided.
All the platforms that these drivers are interesting for already
default to SERIAL=y.
Change-Id: Id692f99e018009b30903db8a2c046a6086be01c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In function at_get_number check for the value if gets computed.
If not return error. Also change the end state handling.
Change-Id: I193b04fa2880dfb44e7727b30b67c1ec2e051cc7
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an implementation for the bt_storage_clear() API.
Jira: ZEP-181
Change-Id: Iae01c571c161317ea0cc44513d108301c7b5a069
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add basic implementation of an internal storage handler that uses the
local file system. The root directory for all Bluetooth related data
is /bt. Each remote device has its own subdirectory and each key its
own file. This helps keep the implementation very simple, but does
come with the meta-data overhead for each file.
As an example, the value of a key 0x0001 for a device with a static
random address cc:11:22:33:44:55 would be stored in the following
file: /bt/cc11223344551/0001. Local values such as the identity
address are stored directly under /bt with a file name that matches
the key the same way as remote-device files.
For full functionality the implementation requires a file system that
can support file/directory names of up to 13 characters in length. If
the file system supports less than that (as is the case with FAT12)
then only local values can be stored (in /bt/abcd). Local values
include the identity address as well as the local IRK.
Jira: ZEP-181
Change-Id: I7dc696af6353a154cb00dcd01a5f4ac3d7127e6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is not needed for Zephyr controller build and should already
be fixed in Mynewt.
Change-Id: I39e81dc3e9b5fd5a3f5f823465527248625caf26
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There's no point in having both a doc/bluetooth and a
doc/subsystems/bluetooth. Move the PICS documentation to the right
place and convert it to rst in the same go.
Change-Id: Iada1f19d0ed3fb3b374e7f708f175d53d797bd93
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add information about the controller support, raw HCI interface and
the new location in the source tree.
Change-Id: I6fab7f17e4a96b8217cd9de4f2437cfba8c06564
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Patch 8c118f8673 causes the wrong semaphore
to checked so receiving credits are never restored which caused the
channel to get stuck after all the credits are consumed.
JIRA: ZEP-1199
Change-Id: I9cd5474b3bcaafcb19d15613939ce30d07befe0a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The right flag to enable GPIO as SPI CS is SPI_CS_GPIO.
Change-Id: I06fc5e7e44f9aa6bad5867462c6c069d545bb0b7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
If newlib is configured with --enable-newlib-nano-formatted-io,
floating-point support is split out of the formatted I/O code into
weak functions which are not linked by default. This leads to a smaller
code by about 16~20k when using newlib "printf" and/or "sscanf" but not
using floating point I/O.
Programs that need floating-point I/O support must explicitly request
linking of one or both of the floating-point functions:
_printf_float or _scanf_float.
This can be done at link time using the -u option which can be passed
to either gcc or ld.
Implemented via new configuration options:
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF
CONFIG_NEWLIB_LIBC_FLOAT_SCANF
Change-Id: I57f9d9f02e6d21d6011d14de7153b1d3ba6f6e32
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Sample to put the device in USB mass storage mode via
config options.
Change-Id: Icaf4839d8e8ac0526d1b723adc87607d6b4df9d7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch implements USB Mass Storage device Class,
which allows the Zephyr target Board to appear
as a USB drive to a host.
This code would invoke disk_read() /disk_write()
hooks which are to be provided by the storage
layer.
The Mass Storage protocol state machine is based on
mbed's implementation. We augment it by adding Zephyr's
USB transport and Storage APIs, and offload disk ops
to a fiber context rather than in the USB irq context.
origin: https://developer.mbed.org/users/mbed_official/code/USBDevice/file/01321bd6ff89/USBMSD
Jira: ZEP-233
Change-Id: I8199598c76da20ab20012d81dac7615f6a366303
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
USB class drivers may need to offload some work from
upcall interrupt context to a background fiber. This
requires some way to defer taking more data from host
till the offloaded work completes. Two APIs are added to
achieve this.
Further USB class drivers sometimes need to set STALL condition
on end-points to signal errors to host.These too are
added.
Change-Id: Ic973522c3394e23d7f9c4c67affc0cd050afc20f
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Adds a disk interface which is independent
of filesystem specific symbols or headers.
Change-Id: I8c72fd3a9d12c5d9623721513fc66edc7bce0a5d
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This TC cover dma transfer with different channel and burst length
It support 2 ways to execute
*) full-auto: by default, it run all sub test cases defined in array
once flashing done and reset.
*) interactive: when CONFIG_CONFIG_CONSOLE_HANDLER_SHELL=y, it go into
shell first, user can input test command one by one for debugging.
move original test under drivers/dma to test_loop_transfer/
Change-Id: I7e78b730592c80bf2c23b20c8b0eb65a9b353acd
Signed-off-by: jing wang <jing.j.wang@intel.com>
Verify the thread priorities are within the bounds when starting a new
thread and when changing the priority of a thread.
Change-Id: I007b3b249e4b80235b6439cbee44cad2f31973bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Since lower-numbered thread priorities are higher, the code can be
misleading when comparing priorities, and often require the same type of
comments. Instead, use utility inline functions that does the
comparisons.
_is_prio_higher already existed, but add comparisons for "lower than",
"higher than or equal to" and "lower than or equal to".
Change-Id: I8b58fe9a3dd0eb70e224e970fe851a2575ad468b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- Add missing irq_lock() before invoking power management.
- Only yield if the idle thread is a coop thread (in coop-only
configurations).
Change-Id: I030795e782590b3023f1d7883bbd058da2c45f4f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Define the priority reserved for the idle thread rather than use
K_LOWEST_THREAD_PRIO.
Change-Id: I514296d774047fa1348249da8ee90a68b6aace17
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A race condition would happend if a FIRQ interrupted a
return-from-interrupt from a RIRQ at the wrong moment: if a decision was
already taken which thread to context switch in and the FIRQ woke up
another thread of higher priority, the ready queue would be corrupted.
The solution is to lock interrupts at the moment the interrupt return
code starts looking at the kernel queues. Interrupts do not need to be
unlocked before exiting: the return-from-interrupt (rtie) instruction
will restore the correct interrupt locking state for the thread being
context switched in.
Change-Id: I777665c2faeca7b1f2a77ddd9ee2a520080bae88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The main task uses stack-hungry() printf(), and the switch to the unified
kernel pushed the necessary space over the edge.
Change-Id: I7b64e7f09d91c5050ffe7fb18506ff24289169fc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For systems that have both high base (CPU, bus, etc.) frequency and
small divider of the base frequency for system clock and this way,
do not allow 1 second period for the system clock, set the system
clock period to 0.1.
Change-Id: Iafb4604112d4adb8430f8bf57a5a31de3f6cf91d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Anas Nashif