Change hard url into :ref: to board documentation
Change-Id: I9d8a585bb0e7274cf3233eadac2e303cc98ef86a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
At the default sample rate of 400 Hz, there is not enough bandwidth on
the UART at 115200 baud to print every sample. Fix by decimating the
sensor data by 4 before printing to the console.
This issue was discovered after fixing ZEP-1507.
Change-Id: I451ec9873ca93fe417d5d5a2d6d13b5e921c7611
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changed README to RST and updated the formatting.
Jira: ZEP-1537
Change-Id: I012854daff6883cf462a3cc0246c73a8767dcd66
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Printing values as <integer_part>.<fractional_part> gives undesired
results for negative numbers, so print the values converted to floating
point to avoid this.
Change-Id: I871b8461f2d643a2adce67df064e9f5e6d506319
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
If we receive 0 byte packets from the network, we need to
ignore those as otherwise it is possible to leak network
buffers.
Change-Id: Id4b5b0d03c0b6d1e16634ff2d1960ea4728c8aa1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because net_buf_frag_del() returns the next fragment in the list,
we can use the return value which makes the code nicer looking.
Change-Id: Ic3d0155417b52a34bfbaa918570ff9af95aee468
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Return and clean buffer when fragment can not be allocated.
Coverity-CID: 157590
Change-Id: Ic8844609da4049623a6cf0c2ae037b2b777542e9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print assigned address and other information if client receives
anything from server. E.g. subnet, lease time and router.
Change-Id: I759d59522930401766452eb1fb3d57d1a8295a67
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ENC28J60 has numbers on the board. Documentation has information about
signals only. Wiring will be easy with pin numbers.
Change-Id: I0afd6058a9417b679ef6358304737bf256aa3522
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
These logs are mandatory to spot buffer leaks. Unfortunately, they are
still not detailed enough to spot the actual place where the leak
happen.
Change-Id: If36dfa7a54aa1546fb268301f369b5ecd046e276
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case of a GET request do not error if there's no payload or queries
parameters.
Change-Id: I29b2225700c83a8a2dad166146288dd55bd8f3de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource verify the capability of the server to send a response to
a POST including a Location-Query option.
Change-Id: I4b663e813eb713d7e93a3c2f8cfd58c335b24cde
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The CoAP test suite expects a specific path included in the
Location-Path option in the response.
Change-Id: Ib7616f9ad318fa93dc862f686429edb5084306e3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium tests expects that all GET responses include the
Content-Format information of the response. In our case, all responses
are of type plain-text.
Change-Id: I08844825f31ed8f4c54020a41b9172cef5da6d70
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
So the sample zoap server application is more conformant, include the
token from the request, if any, in the response.
Change-Id: I5aacc1a3f81ebeaf473d327163c952b829489b01
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium test suite considers an error responding a NON_CON
request with a ACK response, even if the spec says it is valid, so add
support for using the correct type of response according to the
request.
Change-Id: I211c8a135b8db83af442a1d645b7ea0826dbbdec
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This allows to verify that the CoAP server is able to handle a
blockwise PUT request.
Change-Id: I801e353a27b10a5266748591d023bcb607db6bb4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds support for TD_COAP_BLOCK_01 and TD_COAP_BLOCK_02 tests,
which test that the CoAP server is able to handle GET requests with
blockwise tranfers.
Change-Id: Id0d1703adcf5d4e76dd1bc489c8bcc94a3fd90bc
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource is used to verify that the CoAP server is able to send
responses in two steps: 1. only acknowledge that the request was
received and is going to be handled; 2. The actual response, with the
payload.
Change-Id: Ia77cc0ee9805e6cc120c57f4598c68ad364882a0
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
DHCPv4 sample was running on main stack. Updated to run on its own
thread. Update config options (removed unnecessary ones and separated
few options for easy readability).
Change-Id: I3be38ca4cd4bcfa62e2613b90b104679cff2517e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch removes legacy configuation variables found at the
prj_arduino_101.conf file of the DNS sample application.
Change-Id: I74e370a7be177f809d805525cc18f594a59e38c0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
All sample applicatons in Zephyr, using the ENC28J60 driver, set
the ETH_ENC28J60_0_GPIO_PIN Kconfig variable to 19.
However, in the Kconfig.enc28j60 file this variable is set to 24.
That default value, 24, was used only during the first iterations
of this driver and never used again.
In this patch, we set the Kconfig variable to 19 and simplify
project configuration files by removing one line.
Change-Id: I3d5fd9da04a3f10845d2a409de56f5b9c235e995
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove CONFIG_GPIO=y for the Arduino 101 board. This configuration
is now set by default in the board configuration file.
See commit 8f96628064.
Change-Id: I6fa73a5785d78c51f03a0af48fc2aa8cc7636c7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is very handy for debug purposes. It provides us with a reassurance
that at least something is happening, even if initialisation does not
complete (hangs forever).
Change-Id: I6ac1bfec84f8a6694f82d14fdc5d2a27aa1fc634
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The k64f has a random driver the TEST_RANDOM_GENERATOR config is not
necessary.
Change-Id: I73bc4076cac459388d9dd9bf3eb89c8cb5ba7db7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Also remove dependency on STDOUT_CONSOLE, it is not being used.
Change-Id: Ib7488b1e2df3892c1daa2e12da05fcc1266ac9aa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original buffer fragments can be used to send back a reply directly
since Bluetooth doesn't add anything to then.
Change-Id: Ifeac0e6c3abbd527c79912abc5f5b833b0b52171
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HTML documentation shows misaligned text that may be a bit confusing.
This issue was caused by wrong indentation. Furthermore, board specific
instructions to build the image does not include any instruction header.
This commit fixes the above described issues.
Change-Id: Ie965e09f32f46a9d69aac28c4b389084f06b31b6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the convert_to_double function and use sensor_value_to_double
from sensor.h.
Change-Id: I92ef4219057f431917f4c8e9d46d4ee2074b423b
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
David B. Kinder