Print two digits (0 prepended) till 0x0F. Do not print any
count in the beginning of output.
Change-Id: I07e8437f827604565fc8b86d81a105b3986f0a72
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
CoAP context send message data pointer is internal to coap.
ip_buf_appdata points &uip_buf(buf)[UIP_IPUDPH_LEN]. coap
internal data pointer assignment to ip_buf_appdata is wrong.
So copy data to ip_buf_appdata.
Change-Id: I3f11da382a227572c9080b210104a5b8e3dc34b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In Read By Type response, GATT Server shall send UUID of a included
service only if this service UUID is 16 bit. Otherwise GATT Client
will send Read Request to get 128 bit UUID.
Fix tested with PTS.
> ACL Data RX: Handle 64 flags 0x02 dlen 11 [hci0] 1125351.430506
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 12 [hci0] 1125351.435346
ATT: Read By Type Response (0x09) len 7
Attribute data length: 6
Attribute data list: 1 entry
Handle: 0x0002
Value: 01000200
> ACL Data RX: Handle 64 flags 0x02 dlen 7 [hci0] 1125351.605504
ATT: Read Request (0x0a) len 2
Handle: 0x0001
< ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci0] 1125351.613432
ATT: Read Response (0x0b) len 16
Value: efcdab89674523b10040510450aa00f0
Change-Id: Ie07ec7930663b04dc134ee1c5a95c4e0670f5926
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to Core Specification 4.2 Vol 3, Part G, 3.3.3.4,
Server Characteristic Configuration descriptor shall be:
"Readable with no authentication or authorization.
Writable with authentication and authorization defined by a
higher layer specification or is implementation specific."
So there shall be separate authorization permissions
for write and read access.
Change-Id: Ia2850acbb976571743bf96cf9cbe0c1128534073
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
If pairing is rejected due to unsatisfying auth requirements
pending response buffer should be freed.
Change-Id: I8bbdad5fac8cd6dbcd674c7ad9725cf44ef79004
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch introduce new Kconfig option that is used to indicate if
device should operate in Secure Connection Only Mode. Enabling this
option removes support for LE Legacy Pairing.
Change-Id: If224b6786f4c840959fe87a31f0224bc1e21f90e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables generate link key notification event when legacy PIN code
pairing is done well and give possibility to grab the link key for
later connections.
Change-Id: I5e661c203bbebfa8aa931662a479a1b921f7ace9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
When PIN code authentication is requested now there's a way
for user to respond with negative reply.
Change-Id: I800bf535f6ae98ee367393c686d6897f50b5fe8b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Using empty eui64 array resulted in net_set_mac() failure and
address was never set. This used to work only due to
linkaddr_node_addr being being global (and hence zeroed).
Change-Id: Ie21de35a628956c6221b6f1e4c96a1807a1d2804
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This introduces bt_uuid_copy which can be used to copy UUID values.
Change-Id: I22d996bcace454769ac871a43b9acebe8b23db39
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enables get basic connection info support for non-LE connections.
Change-Id: If295b552567886256cfc1e215bfe3149d2f1f60c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Unmasks pin code request to be able service
pairing request from legacy 2.0 devices.
Change-Id: I5c09232d8e6e2c7673a35205e0bfeb8c8240388e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves object handling user authentication callback interface exposed
in public API to hci core module and exports internally LE SMP
authentication handlers.
The stack authentication API methods call based on connection type
the correct internal methods. Currently only LE SMP backend
is implemented.
Make getting local io capa in runtime.
Change-Id: I17459096616a620467b4fa01c53fd4bc0b59af9b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
If GATT client is enabled but SMP is disabled NULL SMP backend
needs to provide bt_smp_sign stub.
LD zephyr.elf
net/built-in.o: In function `bt_att_send':
net/bluetooth/att.c:1747: undefined reference to `bt_smp_sign'
Makefile:757: recipe for target 'zephyr' failed
make[2]: *** [zephyr] Error 1
Change-Id: Ia740d6c7ca7d65b78f7ecb781275d1f4d635baf7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fix a regression where incorrect confirm function was used
for legacy pairing.
Change-Id: Ia39aed6b8e9a3cb24b451cdb0219f41ceb5e6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The fragments we create should not be greater than the connection ACL
MTU (which the code already does correctly) but they can also not be
greater than the buffer has room for data. Fix this by taking the
minimum of the connection MTU and the buffer tail room.
Change-Id: I27462d7e8752773c632d212b28e53a8cf6519972
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was not building due to bt_l2cap_create_pdu API change.
CC net/bluetooth/smp_null.o
net/bluetooth/smp_null.c: In function 'bt_smp_recv':
net/bluetooth/smp_null.c:59:2: warning: passing argument 1 of 'bt_l2cap_create_pdu' from incompatible pointer type [enabled by default]
buf = bt_l2cap_create_pdu(conn);
^
In file included from net/bluetooth/smp_null.c:32:0:
net/bluetooth/l2cap_internal.h:136:17: note: expected 'struct nano_fifo *' but argument is of type 'struct bt_conn *'
struct net_buf *bt_l2cap_create_pdu(struct nano_fifo *fifo);
Change-Id: I5fd8ce63da09af1c123b1092624d48edc009756b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BT_STACK depends on BT_STACK_DEBUG_EXTRA, therefore moving it there.
It also allows to use BT_STACK in drivers, at the moment only
Bluetooth stack uses it.
Change-Id: I41e0e0d49dae6abef2dc3a8d1d109127787d3db0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is in preparation for LE SC only mode support where slave LTK
support is not compiled in.
Change-Id: Ia30ca08010f8aa42752c4a422fd0ddc1fbdb4f31
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make sure the name reflects that it is used only for legacy pairing.
Change-Id: I757311991e9f879f377978b8adb02c7f9758b6b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
All legacy pairing code is now separated in dedicated helper functions
(with 'legacy' prefix). Main code flow is LE SC oriented and legacy
pairing is always handled as exception from LE SC code:
if (!atomic_test_bit(&smp->flags, SMP_FLAG_SC)) {
return legacy_foo(smp);
}
This is in preparation for enabling LE SC only mode.
Change-Id: I89705e6b780014417adaed41bd3beaf4791d8d3f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This function is not used outside of smp.c file.
Change-Id: Ib2158330959f2b4b1d63695480e82ac506243ab8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Include expected opcode to print together with received opcode.
Change-Id: Iacc73c12f22fe0585e2753d709646bacd3e73d32
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We use fiber_delayed_start() for starting delayed fiber. Make use of
fiber_delayed_start_cancel() instead of
fiber_fiber_delayed_start_cancel().
Change-Id: I2399290496ed2a2b21b2a780d884881839f36767
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of storing a pointer to the status (4 bytes) we can just copy
its value directly (1 byte). Since the previous variable is a 16-bit
opcode the smaller 1-byte variable should fit within the same 4-byte
word, saving 4 bytes from the stack.
Change-Id: I406c60c7b2563ba6397ab75cf1dbe3d346b6c0ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add basic color logging support. Error logs will be printed in red
whereas warn() logs in yellow. The support is behind a Kconfig option
in case someone needs to build the stack for a terminal that doesn't
support the ANSI color codes.
Change-Id: I080e32db68f87e81f1bb54aa4c634f7cd38f1e33
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Whenever selects BR/EDR support in Kconfig, make BLUETOOTH_CONN
option be set as well due to for BR/EDR devices fundamental behaviour
is interact with others by making ACL based connections.
Change-Id: Ieffd2fc6aa47278112be177e5a7e2021e50b0fa3
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
As a cleanup of just made disconnection don't touch LE specific
actions.
Change-Id: I0c7c42f47ac8f6683380124df571fa2b2afbf526
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables getting by host connection complete event and handle
internal state of related to the event connection object.
Change-Id: Ie6252ff33cc2e1fff5a4ce746fda7c3a59bf8aab
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Defines helper routine to look up conn pool object for existance
of instance matching requested bluetooth address.
Change-Id: I31e05afb2346c7dab14e7ba1bd2f4e1378876ae0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
To conform to API convention rename BT_CONN_TYPE_BREDR to BT_CONN_TYPE_BR.
Updates stack code so far uses it.
Change-Id: Ia759ef68bbdb232e3b0992740e0536d310e19010
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Ravi kumar Veeramally