Disable test with long AD data being set, as 251 byte
Advertising PDU is not yet supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The timeout for testing advertisement extensions in babblesim
was set to 30 seconds. Depending on the hardware used for
testing this may be too low. Increased to 120 seconds
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Instead of using its own buffer pool use one already available by
HCI_RAW which are accessible with bt_buf_tx_get.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Encode all types of EDTT command response with similar structure to how
it is generated from command complete when it is generated from the
command status.
This structure will be:
2 byte EDTT command response code
2 byte EDTT length field
1 byte HCI status
N bytes of command output parameters
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable tests that was disabled due to test failure. Test have been
updated and are now passing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add privacy configuration when using the split controller for the test
basic_conn_encrypt. The handling with or without controller based
privacy affects the RPA handling in the host due to different
connection complete events being used. This affects the overall pairing
procedure as the addresses are inputs to the pairing functions.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
BT_DEBUG is a promptless helper symbol, defined in
subsys/bluetooth/common/Kconfig. It is selected by BT_DEBUG_LOG, which
these configuration files also enable.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. This symbol is enabled
through being select'ed. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. This symbol is enabled
through being select'ed. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Removed in commit 0eb6ffa3e9 ("logging: kconfig: Remove legacy SYS_LOG
symbols").
Detected by an improved CI check that also checks samples and tests.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add some scripts to automatically run a set of BT conformance tests.
Each script has an associated file which selects which subset of tests
are run by that script.
The LL scripts are divided in 2 subsets so as to allow parallelizing
a bit the run (the LL tests take the longest).
Except these, all other sets are just divided by category.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added application for testing the bluetooth stack
from the EDTTool
Signed-off-by: Henrik Eriksen <heri@oticon.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Switch to using the synchronous bt_init call before starting the main
loop in the peripheral samples. This is to avoid sending notifications
before bluetooth has been properly initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Expand a bit the README file to cover the compile.sh and
run_parallel.sh scripts, in case users would like to use
them locally, to guide them a bit.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Dag Bjarvin