This will add basic support for sending bodies of data that exceed the
size of a single UDP packet.
Block-wise transfers are defined in the recently adopted RFC 7959[1].
The RFC defines four options, two negotiating the block transfer, and
two for informing the size of the transfer. Depending whether the packet
is a request or a response, each option is defined as
"control" (informative) or descriptive (describes what's in the
payload).
Change-Id: Ic71275558c4afed0298d20e8712f76d53904f89f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
strncmp() expects pointers of type 'char *', we could cast option.value
to 'char *', but we can use memcmp() instead, which has the benefit of
being simpler.
Change-Id: I8c4ee4401712f3617c134d8e5b6d84e8f5cc4e1d
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
EWOULDBLOCK is an old error code from BSD. Not much uses it, and on basically
all modern systems it's defined to the same value as EAGAIN, which is the
System V value for the same condition.
Jira: ZEP-982
Change-Id: I5435ce55fa47f5bd2fac5d881b5b195b025f48a2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A good number of option values represent numbers, so add these helpers
so applications can avoid repeating this.
Change-Id: Ied2a844c51808dcafe751a77492d00f2063de7d6
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uIP keeps the port separated from the IP addresses, so if the
application wants to communicate with a remote endpoint we must also
have the port information available.
Change-Id: I8e2b01fe5717166e1f9cebcc74b2056325b8ccc3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds support for observing resources, for client and server side.
For the server side we augment the resource struct so it can hold
information about each interested observer.
For client side, observing a resource abstracted as an reply that
can be called multiple times.
Change-Id: If3f0b41e302cff357ab891e6e91ec2d41579fb92
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
As there is only one response token, we can do this only once at the
beginning of the function, instead of every iteration.
Change-Id: Ibb324a1189929227bd1eb9837c5d330ff8c8dac2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
There were a few lines where the alignment was wrong.
Change-Id: I474976c218ac28564dfe9dcda0e0687ed110834e
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
According to commit b71a8a4591 and Jira: ZEP-733
(libc: remove stddef.h which is provided by the compiler),
the stddef.h in zephyr code is removed and it's provided
by the compiler. The original stddef.h includes two head
files, null.h and size_t.h, which are also useless now.
So remove these two deprecated files, in case conflicting
definition.
Change-Id: Ie7163fdbd23c32759425b50f3deff2a57cc051a9
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
This is a CoAP implementation tailored for Zephyr's requirements, it
tries to use memory predictably by exposing its control structures to
the user (so the user only pays for the features that are used) and
having a lightweight packet representation (the trade-off is that
adding options is not as efficient as it could be, if there were more
information available).
Change-Id: I6f74146c4626a0c554f50b42f163a076e82805ba
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Remove the function wrappers around the 64 bit math and just use C
syntax natively, combining ops where appropriate (e.g. there was a
sequence implementing "(x<<2+x)<<2" to do "multiply by 10"). The
_ldiv5 and _rlrshift routines are non-standard ops that provide useful
abstraction, so they remain as separate functions.
Change-Id: I4d83847348fdd7be09887b833c8ccbd2aa1e4182
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The _to_float() implementation had a somewhat kludgey hand-written 64
bit math implementation, which is unhelpful on Zephyr as all our
toolchains provide a working uint64_t runtime. This is at best just
dupicated code from libgcc, and at worst less efficient.
This patch replaces the existing 64 bit minilibrary but keeps the
uint32_t[2] API as is for ease of validation and review.
One exception is _ldiv5, a specialized divide-by-five implementation.
The 64 bit division routines are large on some architectures (ARM and
ARC in particular), not pulled in by a default Zephyr build, and will
swamp the benefit from this patch. So this includes a
refactored/improved _ldiv5 which leverages libgcc for multiword shifts
instead of just using raw division.
Note also the "noinline" attribute on _ladd(). This is a workaround
for an apparent compiler bug when built with -Og or -Os (hand-hacking
the Makefiles to build with -O0 works), perhaps due to my aliasing the
int array with a long long. This will go away in phase 2.
Change-Id: I63e8c82dabe2bfaa75b63ddb59e5f11d51be538e
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The _to_float routine was apparently written to be able to take a 32
bit float bit representationa as well as a 64 bit double. But in a
printf routine, that can never happen per the C standard (where floats
are always promoted to doubles in varargs context).
This was just hard-configured to 1 at the top of the file, and nothing
else in the project sets "DOUBLE" to try to change it. Just remove
it. If we ever want code to convert a float to a double in memory so
we can use this routine, we have it in libgcc. Or even in hardware on
the FPU where available.
Change-Id: I796814c0fce3ce96faa34fde8da411a28c826699
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Hex, octal and decimal all had separately implemented reduction loops
to generate strings. With only a little work these can all be unified
to a single implementation that works with an arbitrary base.
Performance is probably a little lower owing to the fact that
hex/octal now requires a division per character, and the extra
"reverse the string" trick at the end of the conversion. But code
size savings are substantial.
Change-Id: I11ff376aeca1483f974d328271e19918221b2a41
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The 'z' length specifier is the appropriate one to be used with size_t
(%zu) and ssize_t (%zd) types. Having support for this in our libc
means that we can utilize the compiler format string checks
(__printf_like) without getting warnings of incorrect format
specifiers for size_t and ssize_t variables.
Change-Id: I73fec0145692e0a59934cab548caf24c1c16a3df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements a subset of the standard inttypes.h, based on what
other functionality exists in minimal libc.
Change-Id: Ib5685a6da13768ee46acbfca734d145f7018b9e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The default offsetof() implementation generates a warning
(variably modified <variable> at file scope) when used in
to define the size of an array. By using this builtin with
GCC we avoid the warning and make sure no variable-size
arrays are used.
Change-Id: Iae215f777241f7daaa061067230086dffaa8311d
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is an adaptation of
net/ip/tinydtls/platform-specific/config-zephyr.h to allow external
imports such as KSDK to include assert.h.
Change-Id: I0afee37deb79447363037ba6b4bb9cdbc629be3a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The strstr function finds the first occurrence of a substring
in another string, null terminated strings are not compared, this
function is added for compability for porting other libraries (like
mbedtls)
Jira: ZEP-327
Origin: http://www.leidinger.net/freebsd/dox/libkern/html/d3/d29/
strstr_8c_source.html
Change-Id: I52aac218ce0bd86373ec60f5afc49a92c85f6319
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
We get these out of system.h instead. A clause in libc-hooks.c
for newlib added since we don't get RAM size from
CONFIG_SRAM_BASE_ADDRESS.
Change-Id: Ic35113395b951f625e8e29658afe19c525037964
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some variants of newlib build and expect namespace protected stubs
(typically having an underscore prefix). To support such newlib variants
change all the stubs to the namespace protect version and use function
aliases to support the nonprotected namespace version.
Change-Id: I6a4162eca949afec96b152ffe6f60b87c4496c4d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We only need to implement fstat(), so drop the _fstat implementation and
have fstat() match the newlib docs for minimal implementation and only
set st_mode = S_IFCHR.
Change-Id: Iba9042707d1ee5975ab98293cfe20e2996b17c05
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ecc_make_key declaration has random size of NUM_ECC_DIGITS * 2 but
definition has (and use) only NUM_ECC_DIGITS.
Change-Id: I18f0d7992b21a2ed7ed99851b1b795cff0a08a10
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For CMSIS we now have HAS_CMSIS which needs to be added to the
SoC definition.
Instead of changing the main Makefile we now include a sub-Makefile
with all related header and library paths that are hosted in
ext/
Move redifintion of LIB_INCLUDE_DIR later to get variables defined
in Makefile.toolchain.*
Change-Id: I9f90f90247c2a66b4565427b89d4e1d4dd5c9622
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Cleanup main Makefile and remove all library related code to
lib/ to better support the increasing number of libraries and
to keep the main Makefile clean from library dependencies.
Jira: ZEP-308
Change-Id: Id83cf309020604b8eab8d80cad0021905d5b5f7a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
tinycrypt was built using the lib- scripts without any real benefit. We
also had a wrong placement of the Kconfig files under misc/ and a Kconfig
file for Crypto that was never used before.
Change-Id: I82d5902d92e7c06e10a95f418d9ead3cbcabcce4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Although it's unclear why x86 has a different naming convention,
this scales better.
Change-Id: I939b9d4d04b1833391304700a7c12c9c8607192f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The RAM config symbols need to be updated as they were named by the
commit:
1a1f7fd arc: make SRAM/DCCM values configurable
Change-Id: Ieeb06de2f77b4c9e10a0bc32d8318834ce150f5e
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When capping the the absolute value of the width modifier in printf(),
it must first be cast to an 'unsigned'. This stems from the fact that
in two's complement, not all negative numbers have a positive counterpart.
Change-Id: I3e6f92f68ab1b8dab48bbf883c5ad4b078a93f87
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add definition for the POSIX standard off_t type.
Change-Id: I1142428a3d226d641a8628cbba71cb3ea341ef92
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to have a separate file for this, and we'll be adding
other types like off_t here soon as well.
Change-Id: I40629a5a0fba7af44828eaeead294e4e55844bb0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some parts of Newlib, notably the locale handling stuff, will try to
call open(), and if it's not provided, any application that for some
reason is bringing in that code will fail to link.
Having a non-working implementation keeps that code working.
Change-Id: I28345dabb93431d6b80c839b23a46b7f99dc8734
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Use linker symbol and board configs to determine the start
and extent of remaining RAM present in a board and use
it as newlib's heap.
Change-Id: I7128cf2857664331d83f212f27e8af7ad3bb8936
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
While we don't have a proper heap that can make use of all the
available RAM, make it possible for applications using Newlib to
configure the size of the heap exposed via the sbrk() hook.
Change-Id: I4e3193c1f2df0ace1dbc5b1f6ceb2cdc61479762
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Add definition for ssize_t that may be useful to represent sizes with
variables that also need to be able to have negative values (e.g. to
represent errors).
Change-Id: I52ec69591ccfd760021dad38f5ba1b1ebe707ea5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Summary lines follow the @brief tag instead of the @file tag.
This prevents doxygen build warnings such as ...
The name xxx supplied as the second argument in the \file
statement is not an input file
Change-Id: I1014586ad21be12e14aa1d2a942e6b8a11211795
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Common ecc.c code was not compiled resulting in following link error:
crypto/tinycrypt/lib.a(ecc_dh.o): In function `ecc_make_key':
crypto/tinycrypt/source/ecc_dh.c:50: undefined reference to `vli_set'
crypto/tinycrypt/source/ecc_dh.c:51: undefined reference to `curve_n'
crypto/tinycrypt/source/ecc_dh.c:51: undefined reference to `vli_sub'
crypto/tinycrypt/source/ecc_dh.c:54: undefined reference to `curve_n'
crypto/tinycrypt/source/ecc_dh.c:54: undefined reference to `vli_cmp'
crypto/tinycrypt/source/ecc_dh.c:53: undefined reference to `vli_cond_set'
crypto/tinycrypt/source/ecc_dh.c:56: undefined reference to `vli_isZero'
crypto/tinycrypt/source/ecc_dh.c:62: undefined reference to `curve_G'
...
Change-Id: Ib590fd7330753c0ae8ef54159b0f2b7461b5b38e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The libc 'ctype.h' header file is not supposed to be automatically
included when including 'stdlib.h'.
Change-Id: I821a9946894572a7b82804b1569b7b18c24316db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adding in a README file for the external library of TinyCrypt providing
details for origin, commit id, and where to find the original.
Source: Original to Zephyr Project
Change-Id: Ibc7ec33f7f459e8df88978b5b4505e67a2141998
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updates the minimal libc headers for differences between the C and C++
languages. This includes ...
1. Conditionally defining "bool", "true" and "false" as they are
already keywords in C++.
2. Making the definition of NULL language dependent.
3. Using the _Restrict macro instead of the restrict keyword as
restrict exists in C, but not in C++.
4. Changing the definition of size_t so that it is compatible with
what the compiler expects when building the new operator stubs
(as it varies by architecture).
Change-Id: I37ff058a60b90a05f96e9dd6f61d454d143041ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Consolidates the definitions of size_t in the minimal libc library.
This prevents code duplication.
Change-Id: I996990ad9093ebec1f9ba0045d14319e1a243e70
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Consolidates definitions of NULL in the minimal libc library.
This prevents code duplication.
Change-Id: Ia4a2bde1329d66e7c83afeab806a39b22704ab48
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Vinicius Costa Gomes